Damage mechanism at different transpassive potentials of solution-annealed 316 and 316l stainless steels

Electrochemical impedance spectroscopy (EIS), anodic polarization and scanning electron microscopy techniques were used to investigate the damage mechanism in the transpassive potential region of AISI ...     

A Mobile Cloud-Based eHealth Scheme

Mobile cloud computing is an emerging field that is gaining popularity across borders at a rapid pace. Similarly, the field of health informatics is also considered as an extremely important field. This work observes the collaboration between these two fields to solve the traditional problem of extracting Electrocardiogram signals from trace reports and then performing analysis. The developed system has two front ends, the first dedicated for the user to perform the photographing of the trace report. Once the photographing is complete, mobile computing is used to extract the signal. Once the signal is extracted, it is uploaded into the server and further analysis is performed on the signal in the cloud. Once this is done, the second interface, intended for the use of the physician, can download and view the trace from the cloud. The data is securely held using a password-based authentication method. The system presented here is one of the first attempts at delivering the total solution, and after further upgrades, it will be possible to deploy the system in a commercial setting.     

Prediction of ultrasonic wave velocity in particleboard and fiberboard

Ultrasonic wave velocities were determined at parallel and perpendicular to manufacturing direction and at the interval angles of 15° in clockwise and counterclockwise directions of particleboard and fiberboard. The experimental results were compared with the predicted values using some empirical formulae such as Hankinson and Jacoby equations. The results showed that the ultrasonic wave velocity were the highest in parallel direction in particleboard and fiberboard and decreases with increase of angle and the lowest values occurred in perpendicular direction. The predicted ultrasonic velocity using Hankinson and Jacoby equations are in close agreement with the measured values. Relationship between ultrasonic wave velocities and particles and fibers angle could be successfully presented by cubic and quadratic regression equations as well.     

Anthocyanins characterization of 15 Iranian pomegranate (Punica granatum L.) varieties and their variation after cold storage and pasteurization

Anthocyanins (ACs) are phenolic compounds that are distributed widely in fruits and vegetables. Apart from imparting color to plants, ACs also have an array of health-promoting benefits. In this research, the amounts of major ACs of 15 pomegranate (Punica granatum L.) varieties obtained from Yazd province were determined. The major ACs detected in the studied varieties were as follows: delphinidin 3-glucoside (2.19–16.29 mg/L), delphinidin 3,5-diglucoside (2.36–63.07 mg/L), pelargonidin 3-glucoside (0.26–1.36 mg/L), pelargonidin 3,5-diglucoside (0.01–8.11 mg/L), cyanidin 3-glucoside (5.78–30.38 mg/L), and cyanidin 3,5-diglucoside (4.39–166.32 mg/L). The effect of storage time of unprocessed and pasteurized juices on ACs content of four selected varieties was also studied. Average degradation percentage of each AC was between 23.0 and 83.0% during 10 days at 4 °C. Moreover, in pasteurized juices average degradation of ACs was 42.8 ± 0.5% after 10 weeks storage at 4 °C.     

Intelligent non-linear modelling of an industrial winding process using recurrent local linear neuro-fuzzy networks

This study deals with the neuro-fuzzy (NF) modelling of a real industrial winding process in which the acquired NF model can be exploited to improve control performance and achieve a robust fault-tolerant system. A new simulator model is proposed for a winding process using non-linear identification based on a recurrent local linear neuro-fuzzy (RLLNF) network trained by local linear model tree (LOLIMOT), which is an incremental tree-based learning algorithm. The proposed NF models are compared with other known intelligent identifiers, namely multilayer perceptron (MLP) and radial basis function (RBF). Comparison of our proposed non-linear models and associated models obtained through the least square error (LSE) technique (the optimal modelling method for linear systems) confirms that the winding process is a non-linear system. Experimental results show the effectiveness of our proposed NF modelling approach.     

On the application of Harris hawks optimization (HHO) algorithm to the design of microchannel heat sinks

Engineering with Computers - A novel Harris hawks optimization algorithm is applied to microchannel heat sinks for the minimization of entropy generation. In the formulation of the heat transfer...     

A three-dimensional architecture for a parallel processingphotosensing array [silicon retina application]

A three-dimensional architecture for a photosensing array has been developed. This silicon based architecture consists of a 10 x 10 array of photosensors with 80 microns diameter, through chip interconnects to the back side of a 500 microns thick silicon wafer. Each photosensor consists of a 300 x 300 microns pn-junction photodiode. The following processes were used to create this photosensing architecture: 1) thermomigration of aluminum pads through an n-type silicon wafer; 2) creation of pn-junction photosensors on one side of the wafer; and 3) creation of aluminum pad ohmic contacts to the thermomigrated, through chip interconnects and the substrate on the back side of the wafer. The electrical and optical characteristics of the three-dimensional architecture indicates that it should be well suited as a photosensing framework around which a "silicon retina" could be built.     

Mixed convective heat and mass transfer analysis for peristaltic transport in an asymmetric channel with Soret and Dufour effects

The present investigation addresses the simultaneous effects of heat and mass transfer in the mixed convection peristaltic flow of viscous fluid in an asymmetric channel. The channel walls exhibit the convective boundary conditions. In addition, the effects due to Soret and Dufour are taken into consideration. Resulting problems are solved for the series solutions. Numerical values of heat and mass transfer rates are displayed and studied. Results indicate that the concentration and temperature of the fluid increase whereas the mass transfer rate at the wall decreases with increase of the mass transfer Biot number. Furthermore, it is observed that the temperature decreases with the increase of the heat transfer Biot number.