Electro-copolymerisation of indene and styrene

Electroinitiated cationic copolymerisation of indene and styrene was investigated by constant potential electrolysis. Effects of copolymerisation potential and temperature on the copolymer composition and the reactivity ratios are discussed. The reactivity ratios of the monomers were calculated according to the integrated Lewis-Mayo equation.     

Dry wear and friction behaviour of plasma nitrided Ti–6AL–4 V alloy after explosive shock treatment

The unlubricated wear behaviour of explosive shock treated and, subsequently plasma nitrided Ti–6Al–4 V alloy was studied using a ball-on-disc wear tester. Plasma nitriding was carried out at three different temperatures (700, 800 and 900 °C) for 3, 6, 9 and 12 h. Plasma nitriding after explosive shock treatment enabled a reduction in the wear rate of two orders of magnitude. Detailed investigations of this improved wear performance dependent on the nitriding temperature and time were carried out. The friction and wear data showed a clear breakthrough transition from the nitrided layer to the core of the Ti–6Al–4 V alloy matrix. The lowest wear volume was obtained for the sample, nitrided at 900 °C for 12 h, especially at loads of 2.5, 5 and 7.5 N. Obviously, the hard nitride layers were intimately associated with low wear rate, providing a smooth low friction surface. The coefficient of friction reduced from 0.46 to 0.2 due to a thick and hard compound layer resulting from a high nitrogen diffusion rate caused by explosive shock treatment that expected to increase point defects in the alloy. Detailed examination of the wear tracks showed that plasma nitriding changes the mechanism of wear from one of adhesion for untreated Ti–6Al–4 V to both delamination and mild abrasive.     

Effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with Bioaggregate apical plugs

To evaluate the effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with DiaRoot BioAggregate (BA) when used as apical plugs. Forty single-rooted teeth were prepared using Peeso reamers. The samples were divided into four groups. The intracanal medicaments were applied to the root canals as follows: Group1: a combination of metronidazole–ciprofloxacin–cefaclor, Group2: a combination of metronidazole–ciprofloxacin, Group3: calcium hydroxide, and Group4: no medication. After 21 days, the medicaments were removed. The apical part of each root was horizontally sectioned into 1-mm thick slices. The samples were divided into two subgroups, and the following materials were placed: Biodentine, DiaRoot-BioAggregate. After 48-h incubation, the push-out bond strength was measured. The data were analyzed by a two-way ANOVA. Biodentine showed a significantly higher mean push-out bond strength value than DiaRoot-BioAggregate (P = 0.00). The medications have an effect on the push-out bond strength of both materials (P = 0.002). Biodentine showed better adhesive performance as an apical plug than DiaRoot-BioAggregate.     

Energy and exergy analyses of thin layer drying of mulberry in a forced solar dryer

This paper is concerned with the energy and exergy analyses of the thin layer drying process of mulberry via forced solar dryer. Using the first law of thermodynamics, energy analysis was carried out to estimate the ratios of energy utilization and the amounts of energy gain from the solar air collector. However, exergy analysis was accomplished to determine exergy losses during the drying process by applying the second law of thermodynamics. The drying experiments were conducted at different five drying mass flow rate varied between 0.014 kg/s and 0.036 kg/s. The effects of inlet air velocity and drying time on both energy and exergy were studied. The main values of energy utilization ratio were found to be as 55.2%, 32.19%, 29.2%, 21.5% and 20.5% for the five different drying mass flow rate ranged between 0.014 kg/s and 0.036 kg/s. The main values of exergy loss were found to be as 10.82 W, 6.41 W, 4.92 W, 4.06 W and 2.65 W with the drying mass flow rate varied between 0.014 kg/s and 0.036 kg/s. It was concluded that both energy utilization ratio and exergy loss decreased with increasing drying mass flow rate while the exergetic efficiency increased.     

The preparation of core–shell Al2O3/Ni composite powders by electroless plating

Core–shell nanostructured Ni-coated Al₂O₃ composite powders were synthesised by using the electroless plating method. The influence of the chemical components and powder concentration in the Ni coating was investigated by scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction techniques. The results show that the concentration of the plating components plays an important role in the formation of core–shell Al₂O₃/Ni composite powders. The nickel content in the composite powders could be effectively controlled by adjusting the nickel chloride content and the concentration of NaH₂PO₂·H₂O in the plating solution. The nanostructure of the crystalline Ni coatings was observed to be very attractive for achieving good bonding between ceramic particles and matrices for composite production.     

Electroinitiated cationic copolymerization by direct electron transfer

Electroinitiated cationic copolymerizations of indene-4-methoxystyrene and indene-β-bromostyrene monomer couples were investigated in dichloromethane by constant potential electrolysis. Copolymer compositions were determined by i.r. spectroscopy and reactivity ratios for the monomers were calculated according to integrated Lewis-Mayo equation. The composition of copolymers and the reactivity ratios were discussed in terms of anodic peak potentials of monomers.     

Microstructure Study at Different Thicknesses of Disc-Shaped YBa2Cu3O7?x Prepared by FQMG Method

The flame-quench-melt-growth (FQMG) method was used for the preparation of bulk YBa₂Cu₃O_7?x (Y123). Both the superconducting and nonsuperconducting regions changing with thickness of superconducting sample were determined by X-ray diffraction (XRD) patterns and also observed at micrographs taken by the polarized optical microscope. It was observed that superconducting forming ratio which was examined for different thicknesses of the sample ranging from 6.54 to 1.58 mm strongly enhanced. This means that a region near the top surface of the sample contains more superconducting phase than the other regions. These observations would be helpful in designing and manufacturing the practical applications of YBCO systems.     

Influence of gender,program of study and PC experience on unethical computer using behaviors of Turkish undergraduate students

This study administered the unethical computer using behavior scale (UECUBS) developed by [Namlu, A.G., & Odabasi, F. (2007). Unethical computer using behavior scale: A study of reliability and validity on Turkish university students. Computers and Education, 48, 205–215.] to investigate whether gender, program of study and PC experience have an impact on ethical judgments of undergraduate students regarding information and communication technologies (ICTs). The sample consisted of 559 undergraduates from the Education Faculty of the most populated state university in Turkey. The results of 5 (program of study) × 2 (gender) × 2 (PC experience) between-groups analysis of variance (ANOVA) indicated no significant differences among different programs of study and between high and low experienced PC users. The analysis showed significant differences between males and females. A significant interaction between the program of study and gender was found, which indicated that the difference between males and females did not follow a similar pattern across different programs of study. More specifically, females’ ethical judgments were consistent across different fields while males’ judgments varied according to the field of study.     

Malignant biliary obstruction complicated by ascites: closure of the transhepatic tract with cyanoacrylate glue after placement of an endoprosthesis

Based on the observation of septic shock and severe respiratory impairment in two patients subjected to laparoscopic surgery for small bowel occlusion, an experimental study was carried out in rabbits to evaluate the effect of intra-abdominal CO2 hyperpressure on massive bacterial spread. Increased bacterial access to the blood was observed as a result of the mechanical effect of the hyperpressure associated with the highly septic contents of the occluded bowel. The important risk of bacterial dissemination following accidental peroperative perforation requires extreme caution in the laparoscopic management of late occlusions of the small intestine.     

Epidemiology of enuresis in Turkish children

The treatment and favorable outcome of a bitch with uterine torsion and two retained fetuses are described. The condition was corrected surgically by ovariohysterectomy. Complications (i.e., septic shock, peritonitis, and hemostatic abnormalities) were managed with aggressive medical therapy. Torsion of the gravid uterus in dogs is a life-threatening condition which can have a successful outcome if medical complications encountered in the pre- and postoperative periods are treated quickly and effectively.