A study of moderately thick quadrilateral plate elements based on the absolute nodal coordinate formulation

Finite element analysis using plate elements based on the absolute nodal coordinate formulation (ANCF) can predict the behaviors of moderately thick plates subject to large deformation. However, the formulation is subject to numerical locking, which compromises results. This study was designed to investigate and develop techniques to prevent or mitigate numerical locking phenomena. Three different ANCF plate element types were examined. The first is the original fully parameterized quadrilateral ANCF plate element. The second is an update to this element that linearly interpolates transverse shear strains to overcome slow convergence due to transverse shear locking. Finally, the third is based on a new higher order ANCF plate element that is being introduced here. The higher order plate element makes it possible to describe a higher than first-order transverse displacement field to prevent Poisson thickness locking. The term “higher order” is used, because some nodal coordinates of the new plate element are defined by higher order derivatives. The performance of each plate element type was tested by (1) solving a comprehensive set of small deformation static problems, (2) carrying out eigenfrequency analyses, and (3) analyzing a typical dynamic scenario. The numerical calculations were made using MATLAB. The results of the static and eigenfrequency analyses were benchmarked to reference solutions provided by the commercially available finite element software ANSYS. The results show that shear locking is strongly dependent on material thickness. Poisson thickness locking is independent of thickness, but strongly depends on the Poisson effect. Poisson thickness locking becomes a problem for both of the fully parameterized element types implemented with full 3-D elasticity. Their converged results differ by about 18 % from the ANSYS results. Corresponding results for the new higher order ANCF plate element agree with the benchmark. ANCF plate elements can describe the trapezoidal mode; therefore, they do not suffer from Poisson locking, a reported problem for fully parameterized ANCF beam elements. For cases with shear deformation loading, shear locking slows solution convergence for models based on either the original fully parameterized plate element or the newly introduced higher order plate element.     

Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Threshold for Millimeter-Wave (60 GHz)-Induced Ocular Injury

Journal of Infrared, Millimeter, and Terahertz Waves - Millimeter waves (MMW) absorbed by skin or cornea may induce damage by heat. We have developed a 60 GHz MMW exposure-induced eye...     

Flexible multibody approach in forward dynamic simulation of locomotive strains in human skeleton with flexible lower body bones

A method for bone strain estimation is examined in this article. The flexibility of a single bone in an otherwise rigid human skeleton model has been studied previously by various authors. However, in the previous studies, the effect of the flexibility of multiple bones on the musculoskeletal model behavior was ignored. This study describes a simulation method that can be used to estimate the bone strains at both tibias and femurs of a 65-year-old Caucasian male subject. The verification of the method is performed by the comparison of the results with other studies available in literature. The results of the study show good correlation with the results of previous empirical studies. A damping effect of the flexible bones on the model is also studied in this paper.     

Efficient coupling of multibody software with numerical computing environments and block diagram simulators

Simulation of complex mechatronic systems like an automobile, involving mechanical components as well as actuators and active electronic control devices, can be accomplished by combining tools that deal with the simulation of the different subsystems. In this sense, it is often desirable to couple a multibody simulation software (for the mechanical simulation) with external numerical computing environments and block diagram simulators (for the modeling and simulation of nonmechanical components).     

Digital Game Dynamics Preferences and Player Types

In this study, we examine digital game preferences by identifying game dynamics, i.e. player–game interaction modes, of 700 contemporary digital games, and players' (N = 1717) desire to play games with specific types of dynamics. Based on statistical analysis of the data, 5 game dynamics preference categories (“assault,” “manage,” “journey,” “care,” and “coordinate”) and 7 player types were revealed. The results show that identifying player types requires including both preferred and undesired game dynamics categories in the analysis. The findings unveil digital gaming as a more multifaceted phenomenon than common stereotypes suggest. The original game preferences model we present in this study can be conceptualized as a complementary approach for motivations to play and player behavior studies.     

The effects of paints and moisture content on the indoor air emissions from pinewood (Pinus sylvestris) boards

The emissions of volatile organic compounds (VOCs) from building materials may significantly contribute to indoor air pollution, and VOCs have been associated with odor annoyance and adverse health effects. Wood materials together with coatings are commonly used indoors for furniture and large surfaces such as walls, floors, and ceilings. This leads to high surface-to-volume ratios, and therefore, these materials may participate remarkably to the VOC levels of indoor environment. We studied emissions of VOCs and carbonyl compounds from pinewood (Pinus sylvestris) boards of 10% and 16% moisture contents (MC) with three paints using small-scale test chambers (27 L). The emissions from uncoated pinewood and paints (on a glass substrate) were tested as references. The 28-day experiment showed that the VOC emissions from uncoated pinewood were lower from sample with 16% MC. Painted pinewood samples showed lower emissions compared to paints on glass substrate. Additionally, paints on 16% MC pinewood exhibited lower emissions than on drier 10% MC wood. The emissions from painted pinewood samples were dominated by paint-based compounds, but the share of wood-based compounds increased over time. However, we noticed differences between the paints, and wood-based emissions were clearly higher with the most permeable paint.     

Optimal charging strategy for a residential PEV battery considering bidirectional trade and frequency regulation

International Journal of Control, Automation and Systems - A practical charging strategy for an individual plug-in electric vehicle (PEV) is proposed. A cost function is constructed to reflect...     

Optimized laser processing of calibration blocks for grinding burn detection with Barkhausen noise

Calibration samples for the Barkhausen noise (BN) method were produced with laser processing. A planet gear wheel used for production quality control was subjected to laser irradiation to verify the BN sensor output. Different samples were found to respond similarly to the laser processing although the laser parameters needed to be adjusted for different surface qualities separately. The surface optimization for laser processing was studied with different surface qualities of samples. The ground surface was compared with a sandblasted and vibratory ground surface. The ground and sandblasted surfaces were both amenable to the laser processing whereas the vibratory grinding process created inhomogeneous surfaces for laser beam absorption. Laser processing was found to produce uniform changes in the residual stress values in two perpendicular measuring directions. The root mean square value of the BN voltage signal exhibited linear correlations with the values of the residual stress and surface hardness.