Health status of the over 60 years of age population and its relationship with sociodemographic factors (ANCO Project)

OBJECTIVE: To describe the health status of a population over 60 years and to study their relationship with several socio-demographic variables. DESIGN: A cross-sectional study, population based. SETTINGS: A community. PARTICIPANTS: A randomized sample of 1,103 non institutionalized people over 60 years living in the city of Cordoba (Spain). MEASUREMENTS AND MAIN RESULTS: By mean of a personal interview at home we used the OARS-MFAQ-VE questionnaire. Low self-rated health was associated with the age, to be female sex, a low cultural background, and a low income. Only 5.2% of the study people do not suffered any illness and 56% state that their health problems are major problems for doing their current activities. 4.9% declared to have some degree of physical incapacity. 3.7% of elderly population has an important cognitive deficit. CONCLUSIONS: The majority of elderly people has good health. Age is related with a poor health. Women have more health problems than men.     

Electronic `how things work' articles: two early prototypes

The electronic encyclopedia exploratorium (E³) is a vision of a future computer system-an electronic book describing how thing work. Typical articles in E³ will describe such mechanisms as compression refrigerators, engines, telescopes, and mechanical linkages. Each article will provide simulations, three-dimensional animated graphics that the user can manipulate, laboratory areas that allow a user to modify the device or experiment with related artifacts, and a facility for asking questions and receiving customized, computer-generated English-language explanations. Some of the foundational technology is discussed, focusing on topics in artificial intelligence, graphics, and user interfaces. The initial prototype system and the technical lessons learned from it, as well as the second prototype currently under construction, are described     

Microwave-Assisted Reaction Sintering of Bismuth Titanate-Based Ceramics

Bismuth titanate-based ceramics, pure and doped with 5 mol% WO₃, were prepared by reaction-sintering using a microwave oven. High densities, ≥96% of theoretical density were achieved with very short thermal treatments, with soaking time ranging from 5 to 15 min. Relatively small platelet-like grains were formed, and microstructure seemed not to be strongly affected by doping nor soaking time. Electrical measurements were performed and, as expected, a decrease of electrical conductivity was observed in WO₃-doped materials. The results of reaction-sintered samples, both conventional as well as microwave sintered, are compared with those of samples prepared with previously calcined powders and sintered using microwaves as well as a conventional electric furnace.     

Renopancreatic transplant. Urologic complications

OBJECTIVE: Retrospective study of urological complications in our series of reno-pancreatic transplants. MATERIAL AND METHODS: Between February 1983 and May 1994 our group has conducted 93 RPT, 80 of which, mean age 36 +/- 6 years (24-54 years), are studied in this paper: 57 male and 23 female with an average time in dialysis of 20 +/- 15 months (0-84 months) and diabetes evolution of 21 +/- 5 years (11-37 years). RESULTS: Actuarial annual survival of patient, renal graft and pancreatic graft has been 85%, 79% and 74% respectively. Haematuria: 25% incidence, with graft pancreatitis etiology in 16 cases, rejection in 8 and urinary fistula in 6. Urinary infection: 85% incidence, symptomatic in 23 patients (29%) and asymptomatic in the remaining cases. Dysuria, urethritis and urethral stenosis: 14 patients, all male, most with both conditions associated. Reconversion of pancreatic exocrine secretion by intestinal route was performed in 7 patients. Urinary fistula: secondary to surgery in 9 cases and rejection in 4. Etiology of one case remained unknown. In 4 cases it was resolved with conservative treatment, and with surgical correction in 8. One patient required pancreatic transplantectomy and one patient died of AMI. CONCLUSIONS: Urological complication in RPT account for a significant morbidity, urinary fistula being the one with greater repercussion on the patient and pancreatic graft survival.     

Parenteral nutrition in oncologic patients]

A B16 melanoma-specific CD8+ T cell line (AB1) was established from the spleen cells of C57BL/6 mice cured of B16 melanoma with interleukin (IL)-12 treatment. The AB1 line exclusively used T cell receptor Vbeta11. The AB1 cells exhibited a cytolytic activity against both syngeneic B16 melanoma and allogeneic P815 mastocytoma, whereas a cold inhibition assay revealed specificity of the AB1 cells against B16 melanoma. Their lostability to kill a class I loss variant of B16 melanoma was restored by the transfection of H-2Kb gene. In addition, their interferon (IFN)-gamma production was significantly suppressed by the addition of anti-H-2Kb monoclonal antibody, and RT-PCR analysis showed that the AB1 line expressed the mRNA encoding IFN-gamma, but not IL-4 or IL-10. The experiment using synthetic peptides of tyrosinase-related protein-2 (TRP-2) revealed that the AB1 cells could recognize TRP-2(181-188) peptide. Moreover, the AB1 cells showed an in vivo antitumor effect against established pulmonary metastases of B16 melanoma. Overall, these results indicate that the Tc1-type Vbeta11+ AB1 cells exert an antitumor activity against syngeneic B16 melanoma through recognition of TRP-2(181-188) peptide in an H-2Kb-restricted manner.     

Pressure waves in the aorta during isolated abdominal belt loading: the magnitude, phasing, and attenuation

While rupture of the aorta is a leading cause of sudden death following motor vehicle crashes, the specific mechanism that causes this injury is not currently well understood. Aortic ruptures occurring in the field are likely due to a complex combination of contributing factors such as acceleration, compression of the chest, and increased pressure within the aorta. The objective of the current study was to investigate one of these factors in more detail than has been done previously; specifically, to investigate the in situ intra-aortic pressure generated during isolated belt loading to the abdomen. Ten juvenile swine were subjected to dynamic belt loads applied to the abdomen. Intraaortic pressure was measured at multiple locations to assess the magnitude and propagation of the resulting blood pressure wave. The greatest average peak pressure (113.6 +/- 43.5 kPa) was measured in the abdominal aorta. Pressures measured in the thoracic aorta and aortic arch were 70 per cent and 50 per cent, respectively, that measured in the abdominal aorta. No macroscopic aortic trauma was observed. To the authors' knowledge the present study is the first one to document the presence, propagation, and attenuation of a transient pressure wave in the aorta generated by abdominal belt loading. The superiorly moving wave is sufficient to generate hydrostatic and intimal shear stress in the aorta, possibly contributing to the hypothesized mechanisms of traumatic aortic rupture.     

Ball-burnishing effect on deep residual stress on AISI 1038 and AA2017-T4

Ball-burnishing induces compressive residual stresses on treated materials by the effect of plastic deformation. The result is an increase in the fatigue life of the treated part, retarding the initiation of cracks on the surface. Compressive residual stresses have been previously measured by X-ray diffraction near the surface, revealing considerably high values at the maximum analyzed depth, in relation to other finishing processes such as shot peening. However, the maximum analyzed depth is very limited by using this technique. In this paper, the incremental hole drilling (IHD) technique is tested to measure residual stresses, being able to reach a 2-mm measuring depth. To that objective, a commercial strain gage is used and calibrated using finite element model simulations. A second Finite Element Model based on material removal rate is developed to obtain the equations to calculate the strain release through IHD. Finally, residual stresses are measured experimentally with that technique on two different materials, confirming that ball-burnishing increases the compressive residual stresses in layers up to 0.5?mm deep for the testing conditions, which is a good response to industrial needs. The method proves to be suitable, simple and inexpensive way to measure the value of these tensions.     

Model-Based Development of firewall rule sets: Diagnosing model inconsistencies

The design and management of firewall rule sets is a very difficult and error-prone task because of the difficulty of translating access control requirements into complex low-level firewall languages. Although high-level languages have been proposed to model firewall access control lists, none has been widely adopted by the industry. We think that the main reason is that their complexity is close to that of many existing low-level languages. In addition, none of the high-level languages that automatically generate firewall rule sets verifies the model prior to the code-generation phase. Error correction in the early stages of the development process is cheaper compared to the cost associated with correcting errors in the production phase. In addition, errors generated in the production phase usually have a huge impact on the reliability and robustness of the generated code and final system.In this paper, we propose the application of the ideas of Model-Based Development to firewall access control list modelling and automatic rule set generation. First, an analysis of the most widely used firewall languages in the industry is conducted. Next, a Platform-Independent Model for firewall ACLs is proposed. This model is the result of exhaustive analysis and of a discussion of different alternatives for models in a bottom-up methodology. Then, it is proposed that a verification stage be added in the early stages of the Model-Based Development methodology, and a polynomial time complexity process and algorithms are proposed to detect and diagnose inconsistencies in the Platform-Independent Model. Finally, a theoretical complexity analysis and empirical tests with real models were conducted, in order to prove the feasibility of our proposal in real environments.