A novel radial orientation treatment of nematic liquid crystals using magnetic field lines with permanent magnet and applying the assisted electric field

Recently, there has been considerable research on optical devices, such as liquid crystal (LC) lenses and special optical plates, using LCs. In such devices, relatively small LC cells are frequently used, or unique LC orientations are required. As an LC orientation process, we focused on the LC director's orientation induced by the magnetic force line distribution of a small neodymium magnet. We propose a simple method for obtaining radial orientation, which is rather difficult to obtain using the ordinary rubbing method. The initial orientation in the LC cell is a vertical orientation cell with almost zero azimuth anchoring. With the proposed method, the reorientation process is performed with an assisting electric field and a small permanent magnet, unlike the conventional magnetic field orientation process that requires a large electromagnet. Furthermore, a polymer stabilization treatment is used to fix the obtained radial orientation pattern in the LC cell. After the treatment, the applying voltage can control the tilt angle of the director in weak polymer treatment, and a completely fixed orientation pattern can be obtained that in strong.     

Recurrent infomax generates cell assemblies, neuronal avalanches, and simple cell-like selectivity

Recently multineuronal recording has allowed us to observe patterned firings, synchronization, oscillation, and global state transitions in the recurrent networks of central nervous systems. We propose a learning algorithm based on the process of information maximization in a recurrent network, which we call recurrent infomax (RI). RI maximizes information retention and thereby minimizes information loss through time in a network. We find that feeding in external inputs consisting of information obtained from photographs of natural scenes into an RI-based model of a recurrent network results in the appearance of Gabor-like selectivity quite similar to that existing in simple cells of the primary visual cortex. We find that without external input, this network exhibits cell assembly-like and synfire chain-like spontaneous activity as well as a critical neuronal avalanche. In addition, we find that RI embeds externally input temporal firing patterns to the network so that it spontaneously reproduces these patterns after learning. RI provides a simple framework to explain a wide range of phenomena observed in in vivo and in vitro neuronal networks, and it will provide a novel understanding of experimental results for multineuronal activity and plasticity from an information-theoretic point of view.     

Experience with radio isotope myelography from neurosurgical aspects (author's transl)

Experience with Radio Isotope Myelography is reported here. 169Yb-DTPA as a tracer was intrathecally injected at lumbar region in twenty three patients with various spinal cord lesions. The first scanning is perfomed after comfirming by gamma-camera that the tracer reaches to the lesion, the second and the third scannings are done according to the ascending rate of the tracer. (I) Normal scintimyelogram (A) In normal case, the shape of the Radio Isotope Myelogram well corresponds the shape of anatomical subarachnoid space. (B) In normal adult cases, the tracer comes up to the cisterna magna in 20-25 minutes after the lumbar injection. Therefore, the scintimyelographic diagnosis should be made not only by the shape but also by the ascending rapidity of the tracer. (II) Abnormal scintimyelogram Abnormal scintimyelograms could be summarized as following three categories. (A) "Delay": It means delay of the ascending of the tracer. Besides, "Transient delay" found in a case of Arnord-Chiari's malformation was proposed. (B) "Partial block": It meas a defect at the level of the lesion. This "Partial block" were observed in cases of spinal cord angioma, cervical spondylosis and spinal cord tumor etc. (C) "Complete block": It means the stagnation of the tracer below the lesion. To sum up, Rario Isotope Myelography, especially in partial block, can more easily and more sensitively represent the maximum extent of the spinal cord lesion than other myelographic study or angiographic one. On the other hand, we can not qualitatively diagnose about the lesions by its indistinct border.     

Development and Use of a Kinetical and Real-Time Monitoring System to Analyze the Replication of Hepatitis C Virus

In microbiological research, it is important to understand the time course of each step in a pathogen’s lifecycle and changes in the host cell environment induced by infection. This study is the first to develop a real-time monitoring system that kinetically detects luminescence reporter activity over time without sampling cells or culture supernatants for analyzing the virus replication. Subgenomic replicon experiments with hepatitis C virus (HCV) showed that transient translation and genome replication can be detected separately, with the first peak of translation observed at 3–4 h and replication beginning around 20 h after viral RNA introduction into cells. From the bioluminescence data set measured every 30 min (48 measurements per day), the initial rates of translation and replication were calculated, and their capacity levels were expressed as the sums of the measured signals in each process, which correspond to the areas on the kinetics graphs. The comparison of various HuH-7-derived cell lines showed that the bioluminescence profile differs among cell lines, suggesting that both translation and replication capacities potentially influence differences in HCV susceptibility. The effects of RNA mutations within the 5′ UTR of the replicon on viral translation and replication were further analyzed in the system developed, confirming that mutations to the miR-122 binding sites primarily reduce replication activity rather than translation. The newly developed real-time monitoring system should be applied to the studies of various viruses and contribute to the analysis of transitions and progression of each process of their life cycle.     

Influence of macromolecular structure of novel 2- and 4-armed polylactides on their physicochemical properties and in vitro degradation process

The objective of this study was to analyse how macromolecular structure of polylactides influences their properties and degradation rate. To achieve this, novel 2- and 4-armed PDLLA and PLLA (noted as 2b and 4b) were synthesized by ring-opening method. 1,4-butanediol and pentaerythritol were used as initiators and stannous octoate was used as catalyst. The obtained polymers were investigated in terms of molecular weight by size exclusion chromatography, thermal properties by differential scanning calorimetry and thermogravimetry, and hydrophilicity by the contact angle measurements. The in vitro degradation test was carried out in PBS solution at 37 °C by means of the mass loss, water uptake, molecular weight and thermal properties changes. The branched polylactides including 2bPDLLA, 4bPDLLA, 2bPLLA and 4bPLLA were successfully synthesized and the average molecular weights were around 40-45 kDa. The numbers of arms in each polymer just slightly influenced the thermal properties and the contact angle. The crystallinity of 4bPLLA was 23 %, whereas for 2bPLLA it was 41 %. The degradation rates of both 2b and 4bPLLA were similar and the degradation process was similar only during first 7 weeks. After this period, the degradation rate of 4bPDLLA increased. Consequently, thermal properties and degradation profiles of the branched polymers would depend on plural factors, such as chain length and crystallinity in branched structure.     

Soft Nanotubes with a Hydrophobic Channel Hybridized with Au Nanoparticles: Photothermal Dispersion/Aggregation Control of C60 in Water

Simple glycolipid N‐alkaroyl‐β‐D‐glucopyranosylamine 1(n) selectively self‐assembles into sheets in water, nanotubes in alcohols, and helical nanocoils in toluene. All self‐assemblies consist of bilayer membranes in which 1(n) packed in an interdigitated fashion. The outer surface of the sheet is covered with the hydrophilic glucose headgroup of 1(n), whereas those of the nanotube and helical nanocoil are covered with the hydrophobic alkyl‐chain tail of 1(n). Heat treatment of the nanotube in the presence of water induces a rearrangement of the molecular packing of the outermost surface that allows the nanotube to become an effective nanocontainer for the dispersion of fullerene (C60) in water, a result of the ability of the hydrophilic outer surface of the nanotube and the hydrophobic nanochannel to encapsulate C60. The nanotube also exhibits photothermal characteristics after being hybridized with Au nanoparticles (AuNPs). The photothermal effect of the AuNPs allows the nanotube to unfold its tubular morphology and leads to compulsive release of the encapsulated C60 to the bulk water. Application of other nanotubes with similar photostimulated transformation ability should facilitate control of the dispersion/aggregation of other carbon nanomaterials, functional aromatic compounds, and drugs with low solubility in water.     

D-Amino Acids in Non-gelling Components of Gelatin

Abstract

As a possible cause of the non-gelling property of the sol fraction of gelatin, we considered that higher D-amino acid content should result in decreased formation of helices. The sol fractions ivere extracted from gelatin gels and hydrolyzed to amino acid mixtures. The rates of reaction with D-amino acid oxidase (D-AOX) were recorded for thehydrolyzates. For a comparison, residual gels were also treated similarly. The sol fractions always gave higher results than the residual gels for the three types of gelatin examined. The result also showed that the rates obtained from the sol fractions were in the order: limed ossein > limed hide > acid pigskin.

To examine the reliability of this procedure the D-form content for each amino acid in the sol from the limed hide gelatin was compared with that of the residual gel. The contents in the sol were higher than those in the residue for most of the amino acids which racemized. The results indicate that the increased racemization of amino acids on the extraction of gelatin from raw materials is a cause of the non-gelling property.     

Selective and in-situ determination of carbonate and oxide particles in aqueous solution using laser-induced breakdown spectroscopy (LIBS) for wearable information equipment

Laser-induced breakdown spectroscopy (LIBS) has been applied for quantitative analysis of Al₂O₃, CaCO₃ and MgO particles suspended in water. In the single elemental system, the plasma emission intensities of Al, Ca and Mg were linearly increased with concentration of elements in the range of 1.0×10^?5–1.0×10^?3  M, 1.0×10^?4–2.0×10^?3 M and 8.0×10^?5 –4.0×10^?3 M, respectively. We also investigated the concentration dependence of breakdown spectra for suspended mixtures of Al₂O₃, CaCO₃ and MgO particles. The emission lines, such as Al I, Ca I, Ca II and Mg I, were appeared in the LIBS spectrum simultaneously, and each emission peak could be deconvoluted. The plasma emission intensities of Al, Ca and Mg in the multielemental system were also linearly increased with their concentrations in the range of 1.0×10^?5–1.0×10^?3 M, 1.0×10^?4–2.0×10^?3 M and 4.0×10^?4–2.0×10^?3 M, respectively. LIBS was found to be available for quantitative and qualitative measurement of the concentrations of Al₂O₃, CaCO₃ and MgO particles suspended in water. The present results suggest that LIBS is a potentially useful tool for in-situ analysis on particles composition and concentrations for environmental monitoring by the wearable information equipments.