A local and global tour on MOMoT

Software and Systems Modeling - Many model transformation scenarios require flexible execution strategies as they should produce models with the highest possible quality. At the same time,...     

Cooling of cylindrical vertical tanks submitted to natural internal convection

A numerical and an experimental analysis of velocity and temperature fields inside a storage tank submitted to natural convection is presented. The analysis was performed in two stages. In the first stage, the temperature profile along the vertical axis of the storage tank was obtained experimentally and numerically, for cooling time ranging from 45 to 60 h. The numerical analysis was carried out using a transient bi-dimensional model in cylindrical co-ordinates. In the second stage, after the numerical code validation, 40 cases of cooling with four aspect ratios, five insulation thicknesses, and two different volumes were simulated. In all simulations, thermal losses for the environment in all tank walls (side, top and bottom) were considered. Two correlations for the Nusselt number, encompassing all the forty cases, were obtained with these results.     

Maps of sky relative radiance and luminance distributions acquired with a monochromatic CCD camera

The purpose of this work is to characterize the sky relative radiance and luminance distributions from the analysis of sky images acquired using a monochromatic CCD wide angle lens camera. The proposed methodology is based on the reduction of the number of the gray levels from the original image, in order to sharpen the different regions of the sky hemisphere, resulting in low level gray scale maps. In these maps each gray level is related to an intensity level and each pixel is associated to a sky direction. An experimental system that is able to simultaneously supply images from the sky and solar irradiance data was developed using a commercial CCD camera. The sky relative radiance and luminance distributions for different sky conditions were also determined. The resultant maps agree with observations of the main characteristics of sky radiance and luminance distributions.     

Binding of cadmium,copper, and zinc to humic substances originating from municipal solid waste compost

The application of municipal solid waste (MSW) compost increases both the trace metal loading and the organic matter in the soil. To characterize the quality and metal-binding capacity of the compost OM, we extracted humic acid (HA) and fulvic acid (FA) from mature MSW compost and analyzed them for elemental composition, acid-titratable functional groups, total metal content, and structural components (by ¹³C NMR). HA constituted 67% of all extracted humic substances and differed significantly from HAs of cultivated lands: The compost HA exhibited smaller molecular size, a higher N content, and lower aromaticity due to large amounts of saturated aliphatic components. Metal complexation studies of the extracted HA and FA were performed by equilibrium dialysis titration. The complexing capacity (CC) was highest for Cu: CC_HA = 3357 and CC_FA = 5221 μmol Cu g⁻¹ of dissolved organic carbon (DOC) at pH 5. Zn and Cd were bound (at pH 7) in smaller concentrations: CC_HA(Zn) = 2167, CC_FA(Zn) = 2809, CC_HA(Cd) = 2386, and CC_FA(Cd) = 2468 μmol metal g⁻¹ of DOC. Stability constants for binding on the strongest sites (pK_int) were determined as pK_intHA = 6.6 and pK_intFA = 7.3 for Cu at pH 5; and pK_intHA = 8.0 and pK_intFA = 6.4 for Cd at pH 7. Since these measured parameters fall within the ranges of values obtained for soil humic substances, we conclude that in soils with little organic matter, compost addition will significantly increase the amount of highly reactive organic complexing agents for trace metals in the soil.     

Multiple widths yield reliable finite differences [computer vision]

A finite difference edge finder in which the finite difference is computed at a range of widths, i.e. a range of distances between data points, is introduced. Wide operators report low-amplitude responses more reliably than narrow operators, so if wide operators are used to fill gaps in narrow operator responses, each operator can be restricted to report only statistically reliable responses without losing many real features. This sharply reduces the noise in the final output. Theoretical bounds on spurious responses in the finite difference outputs, given only weak assumptions about the signal and noise, are presented. The expected response of the edge finder to an ideal straight step edge is also analyzed. These performance measures are compared with those of a standard algorithm based on Gaussian smoothing and those of a second algorithm that also considers the spatial structure of noise. The algorithms prove equally good at suppressing noise, but are better able to detect faint or blurred features. These predictions are confirmed by empirical tests on real images     

The failure of composite tubes due to combined compression and torsion

The strength of unidirectional carbon-fibre epoxy laminates has been measured for combined compression and shear loading. Failure was by plastic microbuckling. The axial compressive strength decreased linearly to zero as the shear stress parallel to the fibres was increased from zero to the shear strength. These experimental results support the predictions of Budiansky and Fleck and suggest an average fibre misalignment angle of 2°–3°.     

Hydroprocessing peculiarities of Fischer–Tropsch syncrude

When catalysts developed for crude oil hydroprocessing are used for syncrude, there are syncrude-specific peculiarities to consider. These relate to differences in the nature and abundance of heteroatoms, olefins, metal species, waxes and aqueous products. Some important aspects are (a) heat release during naphtha and distillate hydroprocessing is very high, but wax hydrocracking is almost isothermal; (b) syncrude is sulphur-free and the use of sulphided base-metal hydroprocessing catalysts require the addition of sulphur-containing compounds to the syncrude; (c) oxygenates strongly adsorb on some catalytic surfaces to affect catalytic behaviour; (d) carbonyl–carboxylic acid interconversion and water produced by hydrodeoxygenation (HDO) may result in catalyst degradation by acid and hydrothermal attack; (e) carboxylic acids in syncrude result in equipment corrosion and catalyst leaching; (f) metal carboxylates are the main metal-containing species in syncrude and are not removed by hydrodemetallation (HDM) catalysis, but by thermal decomposition.     

Randomized multicenter comparison of conventional anticoagulation versus antiplatelet therapy in unplanned and elective coronary stenting. The full anticoagulation versus aspirin and ticlopidine (fantastic) study

BACKGROUND: Dual therapy with ticlopidine and aspirin has been shown to be as effective as or more effective than conventional anticoagulation in patients with an optimal result after implantation of intracoronary metallic stents. However, the safety and efficacy of antiplatelet therapy alone in an unselected population has not been evaluated. METHODS: Patients were randomized to conventional anticoagulation or to treatment with antiplatelet therapy alone. Indications for stenting were classified as elective (decided before the procedure) or unplanned (to salvage failed angioplasty or to optimize the results of balloon angioplasty). After stenting, patients received aspirin and either ticlopidine or conventional anticoagulation (heparin or oral anticoagulant). The primary end point was the occurrence of bleeding or peripheral vascular complications; secondary end points were cardiac events (death, infarction, or stent occlusion) and duration of hospitalization. RESULTS: In 13 centers, 236 patients were randomized to anticoagulation and 249 to antiplatelet therapy. Stenting was elective in 58% of patients and unplanned in 42%. Stent implantation was successfully achieved in 99% of patients. A primary end point occurred in 33 patients (13.5%) in the antiplatelet group and 48 patients (21%) in the anticoagulation group (odds ratio=0.6 [95% CI 0.36 to 0.98], P=0.03). Major cardiac-related events in electively stented patients were less common (odds ratio=0.23 [95% CI 0.05 to 0.91], P=0.01) in the antiplatelet group (3 of 123, 2.4%) than the anticoagulation group (11 of 111, 9.9%). Hospital stay was significantly shorter in the antiplatelet group (4.3+/-3.6 versus 6. 4+/-3.7 days, P=0.0001). CONCLUSIONS: Antiplatelet therapy after coronary stenting significantly reduced rates of bleeding and subacute stent occlusion compared with conventional anticoagulation.