Evaluation of microbial toxins,trace elements and sensory properties of a high-theabrownins instant Pu-erh tea produced using Aspergillus tubingensis via submerged fermentation

Theabrownins (TB) are polymeric phenolic compounds associated with the multiple bioactivities of Pu-erh tea, a post-fermented Chinese dark tea. High-TB instant Pu-erh tea was produced via a novel submerged fermentation (SF) using Aspergillus tubingensis and compared with samples produced commercially via the conventional solid-state fermentation (SSF). Viable microorganisms and microbial toxins, especially aflatoxins B₁, G₁, B₂, G₂, cyclopiazonic acid, fumonisins B₁, B₂, B₃ and ochratoxin A, were below the detection limit in all samples. Fewer microbial metabolites were found in SF instant tea compared with the SSF teas. Based on an adult consuming 1 g of instant Pu-erh tea daily, the dietary intake of investigated elements was below the safe limits recommended by various authorities. Tasters viewed the instant tea infusions as very mild, smooth, mellow and full. This suggested that submerged fermentation using A. tubingensis offers a speedy and safe alternative to commercial production of instant Pu-erh tea.     

An Extension of the Sustainability Index Definition in Water Resources Planning and Management

The sustainability index (SI) is a relatively new concept for measuring the performance of water resource systems over long time periods. Its definition is aimed at providing an indication of the integral behaviour of the system with regards to possible undesired consequences if misbalance of available and required waters occurs. SI is initially defined as a product and later reformulated as a geometric mean of performance indicators: reliability, resilience and vulnerability. As an extension of a recently published methodology to compute and use SI, in this paper we propose introducing two more indicators of system performance: (1) reliability of annual firm (safe) water as a system yield and (2) deviation of reservoir levels from corresponding rule curves. The last indicator is of particular importance if there are multi-purpose reservoirs in the system because reservoirs are the most important and sensitive regulators of the water regime within the system. We also propose a framework for assessing system performance in a systematic manner to compute SI at various locations within the system if different operating strategies are applied and, finally, how to evaluate strategies according to the resulting SI by using multi-criteria methods. A case study example from Serbia is used to illustrate the results of measuring sustainability under alternative operating scenarios for a system with three reservoirs and two diversion structures.     

Distortion Minimization: A Framework for the Design of Plane Geometric Anamorphosis

Anamorphosis, as a drawing, represents shapes on a surface such that they appear in their natural form only under specific viewing conditions. Although anamorphoses are mainly studied in a historical context, they are currently experiencing a revival. Plane geometric anamorphoses are a specific sub-type of anamorphic drawings. Some practical problems may arise during the design and realization of plane geometric anamorphosis causing the 3D illusionistic effect to be impaired. The aim of this paper is to identify and analyze these problems. In the paper we use parametric analysis to quantify the distortion that may appear because the point of view is offset from the preferred point of view, and to simulate the deviations that can appear because of the errors in onsite realization. The analysis leads to a framework for the design of plane geometric anamorphosis that minimizes the impairment of the anamorphic illusion.     

Developing a model to assess the success of e-learning systems: evidence from a manufacturing company in transitional economy

This paper examines the success of an e-learning system in a company from the perspective of employees by using a multimethod approach. For this purpose Moodle learning management system was used. The success of e-learning as an information system was evaluated using four constructs of the updated DeLone and McLean IS success model—system quality, use, user satisfaction and net benefits, and adding one more construct—user performance. In this research a combination of observation and survey as two different research methods was used, which allowed the new measure to be incorporated into the model. Empirical assessment was carried out by exploratory factor analysis, confirmatory factor analysis and structural equation modeling. The research model was found to be valid and reliable. The results provide an expanded understanding of the constructs that measure the success of an e-learning system, helping to more deeply understand the key success dimensions and their interrelationships. The implications of our work were discussed. The DeLone and McLean IS success model applied equally well. However, the use of observation as a method of data collection revealed the weaknesses of the original model.     

The influence of bile salts on the distribution of simvastatin in the octanol/buffer system

Abstract

Introduction: Distribution coefficient (D) is useful parameter for evaluating drugs permeability properties across biological membranes, which are of importance for drugs bioavailability. Given that bile acids are intensively studied as drug permeation-modifying and -solubilizing agents, the aim of this study was to estimate the influence of sodium salts of cholic (CA), deoxycholic (DCA) and 12-monoketocholic acids (MKC) on distribution coefficient of simvastatin (SV) (lactone [SVL] and acid form [SVA]) which is a highly lipophilic compound with extremely low water solubility and bioavailability.

Methods: LogD values of SVA and SVL with or without bile salts were measured by liquid–liquid extraction in n-octanol/buffer systems at pH 5 and 7.4. SV concentrations in aqueous phase were determined by HPLC-DAD. Chem3D Ultra program was applied for computation of physico-chemical properties of analyzed compounds and their complexes.

Results: Statistically significant decrease in both SVA and SVL logD was observed for all three studied bile salts at both selected pH. MKC exerted the most pronounced effect in the case of SVA while there were no statistically significant differences between observed bile salts for SVL. The calculated physico-chemical properties of analyzed compounds and their complexes supported experimental results.

Conclusions: Our data indicate that the addition of bile salts into the n-octanol/buffer system decreases the values of SV distribution coefficient at both studied pH values. This may be the result of the formation of hydrophilic complexes increasing the solubility of SV that could consequently impact the pharmacokinetic parameters of SV and the final drug response in patients.     

Use of the Roughness Parameters Ssk and Sku to Control Friction—A Method for Designing Surface Texturing

The aim of this work was to show that with the use of the surface roughness parameters S_sk and S_ku we can predict tribological behavior of contact surfaces and use these parameters to plan surface texturing. This article presents a continuation of our research on virtual texturing and experimental work on surface textures in the form of channels. For this investigation, steel samples were laser surface textured in the shape of dimples with different spacings between the dimples and different dimple depths. The experimental results confirmed that the parameters S_sk and S_ku can be used to design the surface texturing, where a higher value of S_ku and more negative S_sk lead to lower friction.     

Recommendations for tool-handle material choice based on finite element analysis

Huge areas of work are still done manually and require the usages of different powered and non-powered hand tools. In order to increase the user performance, satisfaction, and lower the risk of acute and cumulative trauma disorders, several researchers have investigated the sizes and shapes of tool-handles. However, only a few authors have investigated tool-handles' materials for further optimising them. Therefore, as presented in this paper, we have utilised a finite-element method for simulating human fingertip whilst grasping tool-handles. We modelled and simulated steel and ethylene propylene diene monomer (EPDM) rubber as homogeneous tool-handle materials and two composites consisting of EPDM rubber and EPDM foam, and also EPDM rubber and PU foam. The simulated finger force was set to obtain characteristic contact pressures of 20 kPa, 40 kPa, 80 kPa, and 100 kPa. Numerical tests have shown that EPDM rubber lowers the contact pressure just slightly. On the other hand, both composites showed significant reduction in contact pressure that could lower the risks of acute and cumulative trauma disorders which are pressure-dependent. Based on the results, it is also evident that a composite containing PU foam with a more evident and flat plateau deformed less at lower strain rates and deformed more when the plateau was reached, in comparison to the composite with EPDM foam. It was shown that hyper-elastic foam materials, which take into account the non-linear behaviour of fingertip soft tissue, can lower the contact pressure whilst maintaining low deformation rate of the tool-handle material for maintaining sufficient rate of stability of the hand tool in the hands. Lower contact pressure also lowers the risk of acute and cumulative trauma disorders, and increases comfort whilst maintaining performance.     

Anwendung eines Stranggieß-Simulationsmodells bei Štore Steel – II

This paper represents the elements and the use of the upgraded simulation system, developed in the last half decade for ?tore Steel billet caster. The simulation system is used in the context of the state-of-the-art automation and information of the twenty-five year-old three-strand Concast billet continuous caster for dimensions square 140 and 180 mm with the capacity of 160,000 tons/year. The simulation system is used in the off-line and on-line modes. The off-line mode is used in order to set the proper process parameters and to calculate the temperature field, macrosegregation, and grain structure of the strand. It is also used to calculate the changes in the caster design such as the secondary cooling and the position of the SEN. The on-line model is used in automatic casting control system. The paper represents an update of our BHM publication of 2005 (Application of Continous Casting Simulation at ?tore Steel, BHM, Vol. 150, No. 9, 300–306).     

Possibility of efficient utilization of wood waste as a renewable energy resource in Serbia

Wood biomass in Serbia is traditionally used for energy. However, the manner of its use is outdated, and efficiency is very low. Annually over 3.5 million m³ of wood is cut down for energy needs in Serbia. In order to better exploit all forms of woody biomass, especially the one that is now treated as waste, and in order to fulfil the obligations from the outlined Convention on Climate Change it is necessary to switch to a modern way of production and utilization of woody biomass. Serbia is now at the very beginning of this process. This paper gives an overview and an analysis of the possibilities of utilization of wood waste as a renewable source of energy and the problems that producers in Serbia are facing due to undeveloped markets and excessive funds that are needed to start the production of briquettes and pellets. The ecological and economical advantages of using woody biomass, as well the possible support measures for the use of woody biomass in Serbia are also the topic of this paper. The present situation in this area, the manner of waste management in sawmills and the reasons for the necessity of future development of this industrial production are also briefly described.     

Shear bond strength to dentine of dental adhesives containing hydroxyapatite nano-fillers

The aim of this study was to compare the effect of hydroxyapatite (HAP) nano-rods (HAP_rods) and HAP nano-sticks (HAP_sticks) added to commercial adhesives on the macro-shear bond strength (SBS) to dentine and morphology of the adhesive–dentine interface. HAP was added to Single Bond Universal (SBU, 3M ESPE) and Te-Econom Bond (TeE; Ivoclar Vivadent), in the form of water suspensions to avoid agglomeration of nano-particles and to achieve HAP concentrations of 0.5, 1.0 and 1.5 wt%. Following a ‘total-etch’ or a ‘self-etch’ protocol, the adhesives were applied to flat dentine surface of 162 intact human, third molars (N = 6/group). Composite (Z250, 3M ESPE) was built-up using a split stainless steel mould, 3 mm in diameter. SBS was tested using a universal testing machine at 1 mm/min until fracture. Data were statistically analysed using two-way and one-way analysis of variance with Tukey’s post-test (α = 0.05). HAP_rods had no significant effect on SBS of the tested adhesives while HAP_sticks improved bond strength to dentine only of adhesives applied following the ‘total-etch’ total-etch protocol. SBS values of SBU containing 1% HAP_sticks (15.10 ± 2.96 MPa) and TeE containing 0.5% HAP_sticks applied following the total-etch protocol (12.96 ± 4.48 MPa) were higher than those of their respective control groups (10.36 ± 2.68 and 7.97 ± 3.64 MPa). Samples with higher SBS showed more ‘mixed’ failures. HAP nano-fillers may improve bond strength of total-etch adhesives without an adverse effect on adhesive dispersion on dentine and its ability to infiltrate dentinal tubules.