Synthesis and characterization of an interpenetrating polymer network composed of poly(methacrylic acid) and poly(vinyl alcohol)

Temperature and pH‐responsive interpenetrating polymer network (IPN) hydrogels, constructed with poly(methacrylic acid) (PMAA) and poly(vinyl alcohol) (PVA), by a sequential IPN method, were studied. The characterization of IPN hydrogels was investigated by Fourier‐transform infrared spectroscopy, differential scanning calorimetry (DSC) and swelling under various conditions. The IPN hydrogels exhibited relatively high swelling ratios, in the range 230–380 %, at 25 °C. The swelling ratios of the PMAA/PVA IPN hydrogels were pH and temperature dependent. DSC was used for the quantitative determination of the amounts of freezing and non‐freezing water. The amount of free water increased with increasing PMAA content in the IPN hydrogels. Copyright © 2004 Society of Chemical Industry     

A QoS management framework for distributed multimedia systems

This paper proposes a high‐performance connection management architecture to design a common QoS framework applied to an ATM network based on the Open Distributed Processing (ODP) concept. We design the QoS framework in accordance from the RM‐ODP information and computational viewpoints. Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of the addition of fluoride on the conditional solubility of alumina in LiCl-KCl eutectic melt

Owing to its well-known high complexing power toward Al³⁺ ion, fluoride ion is able to increase the solubility of alumina in alkali chloride melts. To determine the extent of this effect, the formation of aluminium(III) fluoro-complexes was studied potentiometrically in LiCl-KCl eutectic at 470°. But the sodium fluoride addition appeared to produce not only the complexation effect but also a mineralization effect on alumina. So, the thermodynamical stability of alumina formed in this melt by precipitation from aluminium chloride with carbonate ion (oxide anion donor) depends on the fluoride ion concentration. These two effects explain the solubility variation of alumina in the LiCl-KCl eutectic + NaF mixtures. A pF^? - pO^2? diagram, which represents the stability area of the various aluminium (III) species is established, and leads to some conclusions concerning the electrowinning of aluminium from molten chloride melts.The cumulative formation constants of the aluminium(lII) fluoro-complexes (AlF^3?i_i) have been obtained, whose values are the following: 2.5 ± 0.4, 4.7 ± 0.6, 5.7 ± 0.5, 7.5 ± 0.4, 8.0 ± 0.5, 9.0 ± 0.6, respectively for i = 1, 2, 3, 4, 5 and 6. It has been shown that oxyfluoride species such as AlOF^1?j_i does not exist. The solubility products of gamma and alpha-alumina have been determined and are equal to 10^?42.9 and 10^?44.0 respectively (all the constants are given in the molality scale). They differ widely from the solubility product of the alumina obtained in the absence of fluoride ion, ie 10^?27.4.     

Water sorption of poly(vinyl alcohol)/ poly(diallyldimethylammonium chloride) interpenetrating polymer network hydrogels

Temperature‐responsive interpenetrating polymer network (IPN) hydrogels constructed with poly(vinyl alcohol) and poly(diallyldimethylammonium chloride) using the sequential IPN method were studied. The characteristics of IPN hydrogels were investigated using the dynamic vapor sorption system. IPN hydrogels exhibited a relatively high sorption ratio, 180–360% at room temperature. The sorption ratio of hydrogels depended on temperature. Diffusion coefficients were calculated according to the Fickian Law at several temperatures. The apparent activation energy was 5.43 kJ mol^?1, which corresponds to typical diffusion processes. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1389–1392, 2003     

Characteristics of electrical responsive chitosan/polyallylamine interpenetrating polymer network hydrogel

An interpenetrating polymer network (IPN) hydrogel composed of chitosan and polyallylamine exhibited electric‐sensitive behavior. The chitosan/polyallylamine IPN hydrogel was synthesized by radical polymerization using 2,2‐dimethoxy‐2‐phenylacetophenone (DMPAP) and methylene bisacrylicamide (MBAAm) as initiator and crosslinker, respectively. The swelling behavior of the IPN was studied by immersion of the gel samples in aqueous NaCl solutions at various concentrations and pHs. The swelling ratio decreased with increasing concentration and pH of electrolyte solution. The stimuli response of the IPN hydrogel in electric fields was also investigated. When a swollen the IPN was placed between a pair of electrodes, the IPN exhibited bending behavior in response to the applied electric field. The IPN also showed stepwise bending behavior depending on the electric stimulus. In addition, thermal properties of the IPN were investigated by differential scanning calorimetry (DSC) and dielectric analysis (DEA). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 2290–2295, 2002     

Solid circulation characteristics in an internally circulating fluidized bed with orifice-type draft tube

Effects of superficial gas velocities to a draft tube, to an annulus section and particle size on the solid circulation rate (G,) have been determined in an internally circulating fluidized bed (0.28 m I.D. × 2m high) with an orifice type draft tube. The solid circulation rate from the draft tube to an annulus section increases with increasing gas velocities to the draft tube(U _d ) and annulus section (U_a) and consequent increase in pressure drop across the orifice (ΔP_or). However, the values ofG _s decrease by 7–21% with increasing particle size from 86 to 288 μm. The pressure drop across the orifice increases with increasingU _d andU _a . However, ΔP_or decreases by 5–23% with increasing particle size. To predictG _s in an internally circulating fluidized bed, a correlation is proposed as a function of ΔP_or This paper is dedicated to Professor Dong Sup Doh on the occasion of his retirement Korea University.     

Price-based congestion control and local channel-link assignment for multi-radio wireless mesh networks

In multi-radio multi-channel wireless mesh networks, engineering the network capacity requires a complex cross-layer design. In this paper, in order to make the complex problem implementable in a distributed manner, we make a decoupling approach that breaks down the entire design space into routing and initial channel assignment, and distributed congestion control and local channel reassignment. We propose a unified priced-based framework for distributed congestion control and localized channel-link assignment algorithms. We demonstrate the convergence of the proposed algorithms with respect to different fairness objectives (i.e., proportional fairness and max–min fairness) via simulation on both grid and random topologies. The proposed algorithms achieve faster convergence with less overhead in the control and forwarding plane than previous multi-path based algorithms.     

Single‐shot High Dynamic Range Imaging Using Coded Electronic Shutter

Typical high dynamic range (HDR) imaging approaches based on multiple images have difficulties in handling moving objects and camera shakes, suffering from the ghosting effect and the loss of sharpness in the output HDR image. While there exist a variety of solutions for resolving such limitations, most of the existing algorithms are susceptible to complex motions, saturation, and occlusions. In this paper, we propose an HDR imaging approach using the coded electronic shutter which can capture a scene with row‐wise varying exposures in a single image. Our approach enables a direct extension of the dynamic range of the captured image without using multiple images, by photometrically calibrating rows with different exposures. Due to the concurrent capture of multiple exposures, misalignments of moving objects are naturally avoided with significant reduction in the ghosting effect. To handle the issues with under‐/over‐exposure, noise, and blurs, we present a coherent HDR imaging process where the problems are resolved one by one at each step. Experimental results with real photographs, captured using a coded electronic shutter, demonstrate that our method produces a high quality HDR images without the ghosting and blur artifacts.     

Humidity‐sensitive properties of new polyelectrolytes based on the copolymers containing phosphonium salt and phosphine function

A simple strategy was developed based on a new reactive function‐ and a salt‐containing new monomer, 4‐vinylbenzyl dimethyl 2‐(dimethylphosphino)ethyl phosphonium chloride (VDEPC), to obtain stable humidity‐sensitive membranes. The major ingredient of a humid membrane is crosslinked polyelectrolytes obtained from copolymers of VDEPC/2‐ethylhexyl acrylate (2‐EHA) = 1/0, 4/1, and 2/1. Isothermal humidity absorption experiments were performed for the estimation of humidity‐sensing materials. The crosslinked copolymers prepared from the reaction of VDEPC/2‐EHA = 4/1 with 1,4‐dichlorobutane showed an average impedance of 595, 39.1, and 3.9 KΩ at 30, 60, and 90% RH, respectively. Their hysteresis, temperature dependence, frequency dependence, and response time were measured. The reliability including water resistance and a long‐term stability were estimated for the application of the common humidity sensor. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1062–1070, 2003     

Preparation and characterizations of interpenetrating polymer network hydrogels of poly(ethylene oxide) and poly(methyl methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(ethylene oxide) and poly(methyl methacrylate) were prepared by radical polymerization using 2,2‐dimethyl‐2‐phenylacetophenone and ethylene glycol dimethacrylate as initiators and crosslinkers, respectively. The IPN hydrogels were analyzed for sorption behavior at 25°C and at a relative humidity of 95% using dynamic vapor sorption. The IPN hydrogels exhibited a relatively high equilibrium water content in the range of 13–68%. The state of water in the swollen IPN hydrogels was investigated using differential scanning calorimetry. The free water in the hydrogels increased as the hydrophilic content increased. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 258–262, 2003