Malic acid production from renewables: a review

Malic acid derived from fossil resources is currently applied in the food and beverage industries with a medium global production capacity. However, in the transition from a fossil-based to a bio-based economy, biotechnologically produced l -malic acid may become an important platform chemical with many new applications, especially in the field of biopolymers. In this review, currently used petrochemical production routes to dl -malic acid are outlined and insights into possible bio-based alternatives for microbial l -malic acid production are provided. Besides ecological reasons, the possibility to produce enantiopure l -malic acid by microbial fermentation is the biggest advantage over chemical synthesis. State-of-the-art and open challenges concerning production host engineering, substrate choice and downstream processing are addressed. With regard to production hosts, a literature overview is given covering the leading natural production strains of Aspergillus, Ustilago and Aureobasidium, as well as Escherichia coli as the most important engineered recombinant host. The utilization of renewable substrates as an alternative to glucose is emphasized in particular as a key aspect for a competitive bio-based production. Out of the alternative substrates discussed in this review, the industrial side-streams crude glycerol and molasses seem to be most promising for large-scale l -malic acid production. © 2019 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.     

Effects of gemfibrozil (Lopid) on hyperlipidemia in acitretin-treated patients. Results of a double-blind cross-over study

Retrospectively 78 patients with uni- or bilateral acute acoustic trauma (AAT) were evaluated to assess the therapeutic effect of hyperbaric oxygenation (HBO). All subjects received saline or dextran (Rheomacodrex) infusions with Ginkgo extracts (Tebonin) and prednisone. Thirty six patients underwent additional hyperbaric oxygenation at a pressure of 2 atmospheres absolute for 60 minutes once daily. Both treatment groups were comparable as far as age, gender, initial hearing loss and prednisone dose are concerned. The delay of therapy onset was 15 hours in both groups and treatment was started within 72 hours in all cases. Control audiometry was performed after 6.5 days, when the HBO group had had 5 exposures to hyperbaric oxygenation. The average hearing gain in the group without HBO was 74.3 dB and in the group treated additionally with HBO 121.3 dB (P < 0.004). It is concluded, that hyperbaric oxygenation significantly improves hearing recovery after AAT. Therefore acute acoustic trauma with significant hearing threshold depression remains an otological emergency. Minimal therapy involving waiting for spontaneous recovery, which is mostly incomplete leaving a residual C5 or C6 and handicapping tinnitus, is not the treatment of choice. Randomized prospective clinical trials with a larger patient series are needed and further experimental studies are required to understand the physiological mechanisms of HBO responsible for the clinical success in AAT.     

Non-quasi-static models including all injection levels and DC, AC,and transient emitter crowding in bipolar transistors

Two-dimensional equivalent-circuit models for bipolar junction transistors are systematically derived by solving the continuity equations for DC, AC, and transient excitations. These models take into account carrier propagation delay, all injection levels, as well as exponential doping profiles. They include analytically DC, AC, and transient emitter crowding in a more detailed and accurate manner than previously available. Extensions of the models to accommodate arbitrarily doped and heavily doped quasi-neutral layers and to include energy-gap narrowing due to the electron-hole plasma present at high current density are described. The analysis leads to compact large- and small-signal equivalent-circuit lumped models, suitable for use in circuit simulators such as SPICE. The analytical solutions obtained reveal the two-dimensional distribution of the current and carrier densities in the intrinsic base layer and the onset of emitter crowding. They also provide information for the extraction of the intrinsic base resistance. Several assumptions made in the derivations are assessed by the computer program PISCES. The methods presented apply to both homojunction and heterojunction bipolar transistors     

Vegetation Change in Great Lakes Coastal Wetlands: Deviation from the Historical Cycle

Water-level change is integral to the structure and function of Great Lakes coastal wetlands, and many studies document predictable relationships between vegetation and water level. However, anthropogenic stressors, such as invasive species, land-use change, and water-level stabilization, interact to shift the historical cycle (of native vegetation migration up- and down-slope) toward dominance by invasive Typha species. Knowing from earlier studies that water-level stabilization alters the historical vegetation cycle, we asked if similar shifts can occur where water levels are not stabilized. Using historical aerial photographs of three coastal wetlands (in Lake Michigan's Green Bay, Wisconsin), we determined that habitat dominated by Typha species has expanded to eliminate wet meadow habitat. Between 1974 and 1992, linear regressions showed strong, significant relationships of both meadow area (R² ≥ 0.894; p < 0.02) and marsh area (R² ≥ 0.784; p < 0.05) to water level in all three wetlands. In 2000, meadow area was below that predicted by the historical pattern due to the landward advance of marsh habitat during a year of decreasing water levels. In the same period, land use in the wetland watersheds converted from agriculture to urban. Urbanization and the replacement of native Typha latifolia by the invasive hybrid Typha xglauca may have overwhelmed the beneficial impact of water-level fluctuation. The documentation of vegetation shifts, as herein, is an essential step in the process of preserving and restoring ecological integrity.     

Synthesis and Pharmacological In Vitro Investigations of Novel Shikonin Derivatives with a Special Focus on Cyclopropane Bearing Derivatives

Melanoma is the deadliest form of skin cancer and accounts for about three quarters of all skin cancer deaths. Especially at an advanced stage, its treatment is challenging, and survival rates are very low. In previous studies, we showed that the constituents of the roots of Onosma paniculata as well as a synthetic derivative of the most active constituent showed promising results in metastatic melanoma cell lines. In the current study, we address the question whether we can generate further derivatives with optimized activity by synthesis. Therefore, we prepared 31, mainly novel shikonin derivatives and screened them in different melanoma cell lines (WM9, WM164, and MUG-Mel2 cells) using the XTT viability assay. We identified (R)-1-(1,4-dihydro-5,8-dihydroxy-1,4-dioxonaphthalen-2-yl)-4-methylpent-3-enyl 2-cyclopropyl-2-oxoacetate as a novel derivative with even higher activity. Furthermore, pharmacological investigations including the ApoToxGlo^TM Triplex assay, LDH assay, and cell cycle measurements revealed that this compound induced apoptosis and reduced cells in the G1 phase accompanied by an increase of cells in the G2/M phase. Moreover, it showed hardly any effects on the cell membrane integrity. However, it also exhibited cytotoxicity against non-tumorigenic cells. Nevertheless, in summary, we could show that shikonin derivatives might be promising drug leads in the treatment of melanoma.     

Structure-Activity Relationships of Benzamides and Isoindolines Designed as SARS-CoV Protease Inhibitors Effective against SARS-CoV-2

Inhibition of coronavirus (CoV)-encoded papain-like cysteine proteases (PL^pro) represents an attractive strategy to treat infections by these important human pathogens. Herein we report on structure-activity relationships (SAR) of the noncovalent active-site directed inhibitor (R)-5-amino-2-methyl-N-(1-(naphthalen-1-yl)ethyl) benzamide ( 2 b ), which is known to bind into the S3 and S4 pockets of the SARS-CoV PL^pro. Moreover, we report the discovery of isoindolines as a new class of potent PL^pro inhibitors. The studies also provide a deeper understanding of the binding modes of this inhibitor class. Importantly, the inhibitors were also confirmed to inhibit SARS-CoV-2 replication in cell culture suggesting that, due to the high structural similarities of the target proteases, inhibitors identified against SARS-CoV PL^pro are valuable starting points for the development of new pan-coronaviral inhibitors.     

Effect of particle dimension on biocompatibility of carbon nanomaterials

With various emerging applications ranging from medicine to materials and electronics, the risk of exposure to nanomaterials is rapidly increasing. Several routes of exposure to nanomaterials exist; the most important being dermal contact and inhalation. In this dermal toxicity study, the cellular effects of carbon-based materials with diameters ranging from micro- to nano-dimension were investigated using mouse keratinocytes (HEL-30). The carbon materials tested included carbon fibers (CF; 10 μm diameter), carbon nanofibers (CNF; 100 nm diameter), multi-walled carbon nanotubes (MWCNT; 10 nm diameter), and single-walled carbon nanotubes (SWCNT; 1 nm diameter). CF and CNF did not significantly affect cell viability; however, MWCNT and SWCNT reduced cell viability in a time-dependent manner up to 48 h, with full recovery of mitochondrial function by the 72 h time point. After a 24 h exposure, cells exposed to MWCNT produced up to 3-fold higher increase in reactive oxygen species than those exposed to SWCNT. The results of this study suggest that high-aspect ratio carbon material toxicity is dependent on dimension and composition.     

Attention: Reaction Time and Accuracy Reveal Different Mechanisms.

The authors propose that there are 2 different mechanisms whereby spatial cues capture attention. The voluntary mechanism is the strategic allocation of perceptual resources to the location most likely to contain the target. The involuntary mechanism is a reflexive orienting response that occurs even when the spatial cue does not indicate the probable target location. Voluntary attention enhances the perceptual representation of the stimulus in the cued location relative to other locations. Hence, voluntary attention affects performance in experiments designed around both accuracy and reaction time. Involuntary attention affects a decision as to which location should be responded to. Because involuntary attention does not change the perceptual representation, it affects performance in reaction time experiments but not accuracy experiments. The authors obtained this pattern of results in 4 different versions of the spatial cuing paradigm. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

A case study on software risk analysis and planning in medical device development

Software failures in medical devices can lead to catastrophic situations. Therefore, it is crucial to handle software-related risks when developing medical devices, and there is a need for further analysis of how this type of risk management should be conducted. The objective of this paper is to collect and summarise experiences from conducting risk management with an organisation developing medical devices. Specific focus is put on the first steps of the risk management process, i.e. risk identification, risk analysis, and risk planning. The research is conducted as action research, with the aim of analysing and giving input to the organisation’s introduction of a software risk management process. First, the method was defined based on already available methods and then used. The defined method focuses on user risks, based on scenarios describing the expected use of the medical device in its target environment. During the use of the method, different stakeholders, including intended users, were involved. Results from the case study show that there are challenging problems in the risk management process with respect to definition of the system boundary and system context, the use of scenarios as input to the risk identification, estimation of detectability during risk analysis, and action proposals during risk planning. It can be concluded that the risk management method has potential to be used in the development organisation, although future research is needed with respect to, for example, context limitation and how to allow for flexible updates of the product.