Influence of Particle Size Distribution,Moisture Content,and Particle Shape on the Flow Properties of Bulk Solids

Abstract

There has been a great deal of research on characterising bulk solids. However, some of the characteristics, particularly the time‐dependent and random changes of properties, still remain insufficiently understood. The focus of this article is to study the influence of particle size, size distribution, moisture content, and particle shape on the unconfined yield strength of bulk solids. We present some interesting results about the influence of the particle size distribution on the unconfined yield strength of a bulk solid and a new method for determining the influence of particle shape on the unconfined yield strength of a bulk solid, which was made possible by the design and use of a novel attritor.     

Design Guideline for New Generation of High-Temperature Guarded Hot Plate

This paper complements the existing measurement standards and literature for high-temperature guarded hot plates (HTGHPs) by addressing specific issues relating to thermal conductivity measurement of technical insulation at high temperatures. The examples given are focused on the designs of HTGHPs for measuring thin thermal insulation. The sensitivity studies have been carried out on major influencing factors that affect the thermal conductivity measurements using HTGHPs, e.g., the uncertainty of temperature measurements, plate flatness and center-guard gap design and imbalance. A new configuration of center-guard gap with triangular shape cross section has been optimized to obtain the same thermal resistance as a 2 mm wide gap with rectangular shape cross section that has been used in the HTGHPs at NPL and LNE. Recommendations have been made on the selections of heater plate materials, high-temperature high-emissivity coatings and miniature temperature sensors. For the first time, thermal stress analysis method has been applied to the field of HTGHPs, in order to estimate the effect of differential thermal expansion on the flatness of thin rigid specimens during thermal conductivity tests in a GHP.     

Cleaner bioprocesses for promoting zero-emission biofuels production in Vojvodina

In this study, the policy, market conditions and food security of biomass energy sources are assessed for supplying the future needs of Vojvodina. The Autonomous Province of Vojvodina is an autonomous province in Serbia, containing about 27% of its total population according to the 2002 Census. It is located in the northern part of the country, in the Pannonia plain, in southeastern Europe. Vojvodina is an energy-deficient province. The incentives to invest human and financial resources in the research and development of cleaner bioprocesses are high, considering the benefits which might be achieved in terms of environment protection and manufacturing costs. In the near and medium tenu, the development of bioprocesses for waste recycling and resource recovery might be one of the most viable options, considering much research work has already been done. In Vojvodina, there are technological solutions that biofuels produced in a closed cycle, so that the quantity of waste reduced to a minimum. These solutions include the stillage (remainder after distillation) used for fattening cattle, and cattle excrement to produce biogas and manure as fertilizer. The energy required for the production of bioethanol is obtained combustion lignocelullose residual waste from the production of basic raw materials starch, or biogas. Ash from the burned biomass returned to soil as a source of minerals for plants and replacement of mineral fertilizer. Such a closed cycle is economical for small farms in Vojvodina.     

Predicting Chemical Parameters of River Water Quality from Bioindicator Data

We address the problem of inferring chemical parameters of river water quality from biological ones. This task is important for enabling selective chemical monitoring of river water quality. We apply machine learning, in particular regression tree induction, to biological and chemical data on the water quality of Slovenian rivers. Regression trees are constructed that predict values of chemical parameters from data on the presence of bioindicator taxa at the species and family levels.     

The influence of the coordinate reduction on the identification of the joint dynamic properties

A problem of establishing a theoretical model of a joint from the measured frequency-response function (FRF) data is discussed in this paper. The model of the joint is considered as a coupled dynamic stiffness matrix, which generally includes six degrees of freedom (DoFs). For two types of least-squares solution the terms of use are clarified. The effect of coordinate reduction on the identification results is demonstrated numerically. Also the effect of added noise is studied. Using a substructure synthesis method and the identified joint dynamic properties the assembly response is reconstructed.     

Mineralogy of air-pollution-control residues from a secondary lead smelter: environmental implications

The mineralogy and solubility of air-pollution-control (APC) residues from a secondary lead (Pb) smelter have been studied on samples from the Príbram smelter, Czech Republic, recycling car batteries, with the emphasis on their potential environmental effect. The presence of dominant anglesite (PbSO4) and laurionite (Pb(OH)Cl) was observed in a sintered residue from after-burning chambers (800-1000 degrees C). In contrast, low-temperature Pb-bearing phases, such as KCl x 2PbCl2 and caracolite (Na3Pb2(SO4)3Cl), were detected in the major APC residue from bag-type fabric filters. Metallic elements, zinc (Zn), cadmium (Cd), and tin (Sn) were found homogeneously distributed within this residue. The formation of anglesite, cotunnite (PbCl2), (Zn,Cd)2SnO4, and (Sb,As)2O3 was observed during the sintering of this APC residue at 500 degrees C in a rotary furnace. The 168 h leaching test on filter residue, representing the fraction that may escape the flue gas treatment system, indicated rapid release of Pb and other contaminants. Caracolite and KCl x 2PbCl2 are significantly dissolved, and anglesite and cotunnite form the alteration products, as was confirmed by mineralogical analysis and PHREEQC-2 modeling. The observed Pb-bearing chlorides have significantly higher solubility than anglesite and, following emission from the smelter stack, can readily dissolve, transferring Pb into the environmental milieu (soils, water, inhabited areas).     

Improvement of adhesion of fucoidan on polyethylene terephthalate surface using gas plasma treatments

Attachment of polysaccharide fucoidan to the polyethylene terephthalate (PET) polymer surface was studied by X-ray photoelectron spectroscopy (XPS). Fucoidan has antithrombogenic and anticoagulant properties and is therefore a promising coating for vascular graft implants for improving their hemocompatibility. Samples of PET polymer were first modified by nitrogen plasma treatment in order to change the surface wettability and to introduce amino groups to the surface, which act as a linker for further binding of fucoidan. Plasma treated samples were then incubated for 30 min in fucoidan solution. The presence of fucoidan layer on the polymer surface was demonstrated by appearance of S2p signal in the XPS spectra of the coated PET samples. The procedure for immobilization of fucoidan on PET surface was optimized by varying pH value of fucoidan solution from 5 to 7.4. The best results were obtained when using lower pH value pH = 5. At these conditions the thickness of the fucoidan coating was estimated to about 7 nm.     

Required length of guardrails before hazards

One way to protect against impacts during run-off-road accidents with infrastructure is the use of guardrails. However, real-world accidents indicate that vehicles can leave the road and end up behind the guardrail. These vehicles have no possibility of returning to the lane. Vehicles often end up behind the guardrail because the length of the guardrails installed before hazards is too short; this can lead to a collision with a shielded hazard. To identify the basic speed for determining the necessary length of guardrails, we analyzed the speed at which vehicles leave the roadway from the ZEDATU (Zentrale Datenbank Tödlicher Unfälle) real-world accidents database.The required length of guardrail was considered the length that reduces vehicle speed at a maximum theoretically possible deceleration of 0.3 g behind the barrier based on real-world road departure speed. To determine the desired length of a guardrail ahead of a hazard, we developed a relationship between guardrail length and the speed at which vehicles depart the roadway. If the initial elements are flared away from the carriageway, the required length will be reduced by up to an additional 30% The ZEDATU database analysis showed that extending the current length of guardrails to the evaluated required length would reduce the number of fatalities among occupants of vehicles striking bridge abutments by approximately eight percent.