Crystal plasticity modeling of deformation and creep in polycrystalline Ti-6242

This paper develops an experimentally validated computational model based on crystal plasticity for the analysis of two-phase α/β Ti-6242 polycrystalline alloys. A rate-dependent elastic-crystal plasticity model is incorporated in this model to accommodate anisotropy in material behavior and tension-compression asymmetry inherent to this alloy. A combination of microtesting, orientation imaging microscopy, computational simulations, and minimization process, involving genetic algorithms, is implemented in this study for careful characterization and calibration of the material parameters. Size effects are considered in this analysis through a simple scaling process. A homogenized equivalent model of the primary α with transformed β colonies is developed for incorporation in the Ti-6242 FE model. The polycrystalline Ti-6242 computational model incorporates accurate phase volume fractions, as well as statistically equivalent orientation distributions to those observed in the orientation imaging microscopy scans. The effects of orientation, misorientations, and microtexture distributions are investigated through simulations by this computational model. The model is used to simulate constant strain rate and creep tests in compression and tension, and the results are compared with experiments. The effects of microstructure and creep-induced load-shedding on the localization of microstructural stresses and strains are studied for potential crack initiation criteria.     

Determination of 5-aminolaevulinic acid dehydratase activity in erythrocytes and porphobilinogen in urine by micellar electrokinetic capillary chromatography

A micellar electrokinetic capillary chromatographic (MECC) method has been developed and optimised for the separation of 5-aminolaevulinic acid (ALA) and porphobilinogen (PBG). The running buffer consisted of a mixture of 20 mM sodium phosphate and 20 mM sodium borate containing 50 mM sodium dodecyl sulphate (SDS) adjusted to pH 9.5 with 1 M NaOH. The running voltage and temperature were 20-25 kV and 30 degrees C, respectively. The MECC method for the analysis of PBG is fast and simple and is useful for the screening of PBG in the urine of patients suspected to have acute intermittent porphyria (AIP), and for the confirmation of lead exposure by measuring red-cell ALA-dehydratase (ALA-D) activity with ALA as the enzyme substrate.     

Surface charge induced tuning of electrical properties of CVD assisted graphene and functionalized graphene sheets

We demonstrate a new approach to tune the electrical properties of graphene and functionalized graphene. Graphene was synthesized using thermal chemical vapour deposition(TCVD) method on copper foil using precursor gas acetylene and co-catalyst H2 gas. TCVD assisted graphene was successfully transferred onto a silicon wafer. Transferred graphene sheet was then functionalized to prepare graphene oxide(GO) and reduced graphene oxide(rGO). Different surface charge carbon nanoparticles, e.g. carbon nanoparticle with net positive charge and carbon nanoparticle with net negative charge were then immobilized on transferred graphene and functionalized graphene sheets. The functionalized graphene and charge mobilized functionalized graphene were characterized by Uv–vis spectroscopy,Fourier transformed infrared spectroscopy, scanning electron microscopy, and Raman spectroscopy. After immobilization of carbon nanomaterials, the ac electrical conductivity was found to increase due to enhancement of the surface charge, electron density, and mobility. It was observed that negative surface charge immobilized graphene and functionalized graphene show higher conductivity. Thus, the electrical property of graphene and functionalized graphene can be tuned by surface modification with different surface charge carbon nanomaterials.     

Yield and Functional Properties of Taro Starch as Affected by Ultrasound

Effect of ultrasound pretreatment on yield and functional properties of taro starch was investigated. A three-factor two-level factorial design was employed with treatment time (5 and 10 min), treatment cycle (0.5 and 1), and amplitude of ultrasound (50 and 100 %). Starch yield from ultrasonic treatment varied from 17.45 to 18.97 % compared to 15.29 % in conventional method. The highest yield of 18.97 % was obtained with treatment time 10 min, treatment cycle 0.5, and amplitude 50 %. A significant increase in swelling, solubility, pasting, and texture properties of the ultrasonically extracted starch was observed. A slight decrease in clarity of the starch pastes was also observed after ultrasonic pretreatment, but the differences were not much significant. Freeze-thaw stability of the ultrasonically extracted starches was found to be better compared to starch extracted using conventional method, making them suitable for foods subjected to refrigeration. The whiteness of the ultrasonically extracted starch powders was lower compared to conventionally extracted starch, but the differences were not statistically significant.     

Recent development and challenges of multifunctional structural supercapacitors for automotive industries

In the last decades, fuel scarcity and increasing pollution level pave the way for an extensive interest in alternatives to petroleum‐based fuels such as biodiesel, solar cells, lithium ion batteries, and supercapacitors. Among them, structural supercapacitors have been considered as promising candidates for automotive industries in present time. Herein, the use of carbon fiber‐based supercapacitors in automotive applications is reviewed. Carbon fiber is an excellent candidate for vehicle body applications, and its composites could be widely used in the development of supercapacitors that could provide both structural and energy storage functions. Different surface modification processes of the carbon fiber electrode to enhance the electrochemical as well as mechanical performances are discussed. The advantages of the glass fiber separator and its comparison with other types of dielectric media have been incorporated. The synthesis procedures of the multifunctional solid polymer electrolyte and its significance have been also elaborated. The fabrication process, component selection, limitations, and future challenges of these supercapacitors are briefly assimilated in this review. Copyright © 2017 John Wiley & Sons, Ltd.     

Phytochemical Constituents,Attenuated Total Reflectance Fourier Transform Infrared Analysis and Antimicrobial Activity of Four Plant Leaves Used for Preparing Rice Beer in Assam,India

Phytochemicals content and antimicrobial activity of Artocarpus heterophyllus, Cyclosorus extensa, Oldendia corymbosa, and Alpinia malaccensis were investigated. Maximum alkaloids and terpenoids were found in A. heterophyllus; tannins and saponins in C. extensa; flavonoids, polyphenols, and phytosterols in O. corymbosa and anthraquinone, glycosides, and anthocyaninin A. malaccensis. Aqueous, methanolic, ethyl acetate, and hexane extracts were prepared from all the leaves. Attenuated total reflectance Fourier transform infrared spectrophotometric (ATR-FTIR) analysis revealed that alkanes and alkyl halides were prevalent in all the extracts and the ethyl acetate extracts contained comparatively higher number of functional groups, which were also more effective against Candida albicans, Escherichia coli, and Staphylococcus aureus. The minimum inhibitory concentration values of A. malaccensis against the tested pathogens were found to be lesser than the other species.