Atmospheric correction of optical imagery from MODIS and Reanalysis atmospheric products

In this paper we analyze the differences obtained in the atmospheric correction of optical imagery covering bands located in the Visible and Near Infra-Red (VNIR), Short-Wave Infra-Red (SWIR) and Themal-Infrared (TIR) spectral regions when atmospheric profiles extracted from different sources are used. In particular, three sensors were used, Compact High Resolution Imaging Spectrometer (CHRIS), Advanced Spaceborne Thermal Emission and Reflection radiometer (ASTER) and Landsat5 Thematic Mapper (TM), whereas four atmospheric profiles sources were considered: i) local soundings launched near the sensor overpass time, ii) Moderate Resolution Radiometer (MODIS) atmospheric profiles product (MOD07), iii) Atmospheric Correction Parameter Calculator (ACPC) generated by the National Center for Environmental Prediction (NCEP) and iv) Modified Atmospheric Profiles from Reanalysis Information (MAPRI), which includes data from NCEP and National Center of Atmospheric Research (NCAR) Reanalysis project but interpolated to 34 atmospheric levels and resampled to 0.5° × 0.5°. MODIS aerosol product (MOD04) was also used to extract Aerosol Optical Thickness (AOT) values at 550 nm. Analysis was performed for three test dates (12th July 2003, 18th July 2004 and 13th July 2005) over an agricultural area in Spain. Results showed that air temperature vertical profiles were similar for the four sources, whereas dew point temperature profiles showed significant differences at some particular levels. Atmospheric profiles were used as input to MODTRAN4 radiative transfer code in order to compute atmospheric parameters involved in atmospheric correction, with the aim of retrieving surface reflectances in the case of VNIR and SWIR regions, and Land Surface Temperature (LST) in the case of the TIR region. For the VNIR and SWIR region, significant differences depending on the atmospheric profile used were not found, particularly in the Visible region in which the AOT content is the main parameter involved in the atmospheric correction. In the case of TIR, differences depending on the atmospheric profile used were appreciable, since in this case the main parameter involved in the atmospheric correction is the water vapor content, which depends on the vertical profile. In terms of LST retrieval from ASTER data (2004 test case), all profiles provided satisfactory results compared to the ones obtained when using a local sounding, with errors of 0.3 K for ACPC and MAPRI cases and 0.7 K for MOD07. When retrieving LST from TM data (2005 test case), errors for MOD07 and MAPRI were 0.6 and 0.9 K respectively, whereas ACPC provided an error of 2 K. The results presented in this paper show that the different atmospheric profile sources are useful for accurate atmospheric correction when local soundings are not available. In particular, MOD07 product provides atmospheric information at the highest spatial resolution, 5 km, although its use is limited from 2000 to present, whereas MAPRI provides historical information from 1970 to present, but at lower spatial resolution.     

Evaluation of the surface urban heat island effect in the city of Madrid by thermal remote sensing

The surface urban heat island (SUHI) effect is defined as the increased surface temperatures in urban areas in contrast to cooler surrounding rural areas. In this article, the evaluation of the SUHI effect in the city of Madrid (Spain) from thermal infrared (TIR) remote-sensing data is presented. The data were obtained from the framework of the Dual-use European Security IR Experiment (DESIREX) campaign that was carried out during June and July 2008 in Madrid. The campaign combined the collection of airborne hyperspectral and in situ measurements. Thirty spectral and spatial high-resolution images were acquired with the Airborne Hyperspectral Scanner (AHS) sensor in a 11, 21, and 4 h UTC scheme. The imagery was used to retrieve the SUHI effect by applying the temperature and emissivity separation (TES) algorithm. The results show a nocturnal SUHI effect with a highest value of 5 K. This maximum value agrees within 1 K with the highest value of the urban heat island (UHI) observed using air temperature data (AT). During the daytime, this situation is reversed and the city becomes a negative heat island.     

A 4-Mb low-temperature DRAM

The authors present the characterization of the first dynamic RAM (DRAM) fabricated in a technology specifically optimized for cryogenic operation. With the power supply adjusted to assure hot-electron reliability, the 25-ns 4-Mb low-temperature (LT) chips operated 3 times faster than conventional chips. The LT-optimized chips functioned properly with cycle times as fast as 45 ns, and with a toggle-mode data rate of 667 Mb/s. Wide operating margins and a very large process window for data retention were demonstrated. At a temperature of 85 K the storage retention time of the trench-capacitor memory cells exceeded 8 h. This study shows that the performance leverage offered by low temperature applies equally well to DRAM and to logic. There is no limitation inherent to memory     

Maintenance of breast milk immunoglobulin A after high-pressure processing

Human milk is considered the optimal nutritional source for infants. Banked human milk is processed using low-temperature, long-time pasteurization, which assures microbial safety but involves heat denaturation of some desirable milk components such as IgA. High-pressure processing technology, the subject of the current research, has shown minimal destruction of food macromolecules. The objective of this study was to investigate the influence of pressure treatments on IgA content. Moreover, bacterial load was evaluated after pressure treatments. The effects of high-pressure processing on milk IgA content were compared with those of low-temperature, long-time pasteurization. Mature human milk samples were heat treated at 62.5°C for 30 min or pressure processed at 400, 500, or 600 MPa for 5 min at 12°C. An indirect ELISA was used to measure IgA in human milk whey obtained after centrifugation at 800 × g for 10 min at 4°C. All 3 high-pressure treatments were as effective as low-temperature, long-time pasteurization in reducing the bacterial population of the human milk samples studied. After human milk pressure processing at 400 MPa, 100% of IgA content was preserved in milk whey, whereas only 72% was retained in pasteurized milk whey. The higher pressure conditions of 500 and 600 MPa produced IgA retention of 87.9 and 69.3%, respectively. These results indicate that high-pressure processing at 400 MPa for 5 min at 12°C maintains the immunological protective capacity associated with IgA antibodies. This preliminary study suggests that high-pressure processing may be a promising alternative to pasteurization in human milk banking.     

Object Touch by a Humanoid Robot Avatar Induces Haptic Sensation in the Real Hand

Humanoid robot embodiment is a recently developed form of mediated embodiment. In 2 studies, we report and quantify a new haptic (touch) illusion during embodiment of a humanoid robot. Around 60% of the users in our studies reported haptic sensations in their real hand when they observed their robot avatar touching a curtain with its hand. Critically, our study shows for the first time that users can experience haptic sensations from a nonanthropomorphic embodied limb/agent with visual feedback alone (i.e. no haptic feedback provided). The results have important implications for the understanding of the cognitive processes governing mediated embodiment and the design of avatar scenarios.     

Fast CMOS ECL receivers with 100-mV worst-case sensitivity

CMOS emitter-coupled logic (ECL) receiver circuits consisting of a differential-amplifier stage and a CMOS inverter are shown to convert 100-mV input signals to on-chip CMOS levels even with worst-case parameter variations in a 5-V 1-μm technology. Two different receiver circuits are used to cover a range of power supply options; a third circuit provides a comparison case. The differential amplifiers feature built-in feedback compensation for common-mode parameter variations. The differential input devices are designed with large widths, minimum channel lengths, and an interleaved layout to enhance gain, speed, and margin for differential mismatches. The simplicity of the circuits and the effectiveness of the built-in compensation facilitate analysis. Partitioning and simplifying assumptions are used to thoroughly test the worst case without complex simulations, while providing insight into the design process     

A 22-ns 1-Mbit CMOS high-speed DRAM with address multiplexing

Describes a 1-Mbit high-speed DRAM (HSDRAM), which has a nominal random access time of less than 27 ns and a column access time of 12 ns with address multiplexing. A double-polysilicon double-metal CMOS technology having PMOS arrays inside n-wells was developed with an average 1.3- mu m feature size. The chip has also been fabricated in a 0.9*shrunken version with an area of 67 mm/sup 2/, showing a 22-ns access time. The chip power consumption is lower than 500 mW at 60-ns cycle time. This HSDRAM, which provides SRAM-like speed while retaining DRAM-like density, allows DRAMs to be used in a broad new range of applications.<>     

Data-driven and tool-supported elicitation of quality requirements in agile companies

Software Quality Journal - Quality requirements (QRs) are a key artifact needed to ensure the quality and success of a software system. Despite their importance, QRs rarely get the same degree of...