Poly(vinyl pyrrolidone)—C70 complexes in aqueous solutions

Aqueous solutions of poly(vinyl pyrrolidone)-fullerene complexes (PVP-C₇₀) have been studied using static and dynamic light scattering methods. Two diffusive processes were detected. The slow diffusion was interpreted as dynamics of large intermolecular PVP-C₇₀ complexes while the fast diffusion was associated with the presence of individual PVP molecules in solution. It was also shown that the molecular weights and dimensions of PVP-C₇₀ complexes are smaller than for PVP-C₆₀ by a factor of 2.5-3. In aqueous solutions of PVP-C₇₀ complex the depolarization and dissymmetry of scattered light were observed in contrast to PVP-C₆₀ solutions. It reveals the existence of anisotropic structures in PVP-C₇₀ solutions. Intermolecular interactions within PVP-C₇₀ complexes are weak and a hydrodynamic field can destroy complexes.     

Latchup-free ESD protection design with complementary substrate-triggered SCR devices

The turn-on mechanism of silicon-controlled rectifier (SCR) devices is essentially a current triggering event. While a current is applied to the base or substrate of an SCR device, it can be quickly triggered on into its latching state. In this paper, latchup-free electrostatic discharge (ESD) protection circuits, which are combined with the substrate-triggered technique and an SCR device, are proposed. A complementary circuit style with the substrate-triggered SCR device is designed to discharge both the pad-to-V/sub SS/ and pad-to-V/sub DD/ ESD stresses. The novel complementary substrate-triggered SCR devices have the advantages of controllable switching voltage, adjustable holding voltage, faster turn-on speed, and compatible to general CMOS process without extra process modification such as the silicide-blocking mask and ESD implantation. The total holding voltage of the substrate-triggered SCR device can be linearly increased by adding the stacked diode string to avoid the transient-induced latchup issue in the ESD protection circuits. The on-chip ESD protection circuits designed with the proposed complementary substrate-triggered SCR devices and stacked diode string for the input/output pad and power pad have been successfully verified in a 0.25-/spl mu/m salicided CMOS process with the human body model (machine model) ESD level of /spl sim/7.25 kV (500 V) in a small layout area.     

ESD protection design to overcome internal damage on interface circuits of a CMOS IC with multiple separated power pins

This paper reports a real case of electrostatic discharge (ESD) improvement on a complementary metal oxide semiconductor integrated circuit (IC) product with multiple separated power pins. After ESD stresses, the internal damage have been found to locate at the interface circuit connecting between different circuit blocks with different power supplies. Some ESD designs have been implemented to rescue this IC product to meet the required ESD specification. By adding only an extra ESD clamp N-channel metal oxide semiconductor with a channel width of 10 /spl mu/m between the interface node and the ground line, the human-body-model (HBM) ESD level of this IC product can be improved from the original 0.5 to 3 kV. By connecting the separated vertical sync signal (VSS) power lines through the ESD conduction circuit to a common VSS ESD bus realized by the seal ring, the HBM ESD level of the enhanced version IC product with 12 separated power supplies pairs can be significantly improved from original 1 kV up to > 5 kV, without the noise coupling issue.     

Semi-automated user agents in distributed change management

Flexible integration of distributed design and manufacturing activities is one of the key issues in applying just-in-time principles along the logistics chain. The potential of AI based approaches in this field is clear, but the inherent asynchrony, concurrency, and inconsistency of distributed operations has reduced enthusiasm so far.This paper discusses coordination in the context of geographically distributed manufacturing of one-of-a-kind products. Cooperation of partners is based on semi-automated user agents which operate as an integrative layer between more dedicated tools and systems. The management of order changes in elevator manufacture is used as a case example.The work reported here is part of the DIMUN project (DIMUN, 1989) in the RACE program.     

Class separation of mutagenic polycyclic organic material in grilled and smoked foods

Zusammenfassung Es wird über ein Verfahren zur Abtrennung der in gegrillten und geräucherten Lebensmitteln enthaltenen mutagenen polycyclischen organischen Stoffe in einzelne Klassen berichtet. Das Verfahren umfaßt eine erste Extraktion mit Aceton, das Abscheiden von Fett und Proteinen durch Ausfällung bei –55 °C und eine Säure-Base-Extraktion. Die weitere Fraktionierung erfolgte durch Gelfiltration und Silicagel-Chromatographie. Bei vier Proben von gegrillten Würsten waren 80 bis 90% der extrahierten Mutagenität (TA98 + S9) in den basischen Fraktionen enthalten. Die in der Flamme gegrillten Würste hatten eine höhere Mutagenität als die auf Holzkohle gegrillten. Bei den geräucherten Fischen war die Mutagenität gering und verteilte sich gleichmäßig auf die basischen und die neutralen/sauren Fraktionen. Einige Proben zeigten schwache Direktmutagenität in den neutralen/sauren Fraktionen. Die Anwesenheit von Nitrit in den gegrillten Würsten hatte keinen erheblichen Einfluß auf die Mutagenität. Die Gaschromatographie, Selektive Ionregistrierung-Technik, wurde erfolgreich zur Identifizierung mehrerer PAH-Verbindungen eingesetzt, und mit ihr konnten mehrere Nitro-PAH und oxydierte Verbindungen vorläufig identifiziert werden. Der Nachweis der Mutagene in den basischen Fraktionen gestaltete sich jedoch wegen Peak-Schweifbildung und mit-eluierenden Materials kompliziert.Summary A method for class separation of mutagenic polycyclic organic material in grilled and smoked foods is described. The procedure involves an initial extraction with acetone, removal of fat and proteins by precipitation at –55 °C, and an acid-base extraction. Further fractionation was carried out by gel filtration and silica gel chromatography. In four samples of grilled sausages, 80%–90% of the extracted mutagenicity (TA98 + S9) was contained in the basic fractions. Flame-grilled sausages showed higher mutagenicity than charcoal-grilled ones. In a smoked fish sample, the mutagenicity was low and evenly distributed between the basic and the neutral/acidic fractions. A few samples showed a weak direct-acting mutagenicity in the neutral/acidic fractions. The presence of nitrite in grilled sausages did not influence the mutagenicity markedly. Gas chromatography-selected ion monitoring was used to successfully identify a number of polycyclic aromatic hydrocarbons (PAHs) and tentatively identify several nitro-PAHs and oxygenated compounds. However, the identification of mutagens in the basic fractions was complicated by peak tailing and the presence of co-eluting material.

---

Abtrennung mutagenen polycyclischen organischen Materials in gegrillten und geräucherten Lebensmitteln

     

Method for characterization of triacylglycerols and fat-soluble vitamins in edible oils and fats by supercritical fluid chromatography

This study demonstrates the usefulness of capillary supercritical fluid chromatography (SFC) for the characterization of triacylglycerols of edible oils and fats. Triacylglycerols were separated according to the acyl carbon number and the degree of unsaturation on a 25% cyanopropyl/25% phenyl/50% methylpolysiloxane stationary phase. Valuable information concerning the triacylglycerol composition of berry oils was obtained, despite the overlapping of certain triacylglycerol peaks. Simultaneous analysis of fat-soluble vitamins and triacylglycerols is not practical by capillary SFC with flame-ionization detection because of the low concentration of naturally-occurring fat-soluble vitamins in edible oils. Therefore, higher loading of the sample, which led to overloading of triacylglycerols, was required to get reasonable peaks for fat-soluble vitamins. The method was applied to the characterization of triacylglycerols and tocopherols in sea buckthorn pulp and seed oil, and cloudberry seed oil without any sample purification prior to SFC. In addition, the stationary phase proved useful for separating the more complex mixtures of triacylglycerols found in milk fat and in fish oil.     

The movement patterns and the experiential components of virtual environments

Human movement in virtual environments (VEs) is a largely unstudied area, and there are no well-established methods of measuring it in VEs. Consequently, it is unclear how movement affects the experiential side of VEs. We introduce a novel method of measuring and modelling human movement. A specific information entropy-based modelling method enabled us to identify different movement patterns and analyse the experiential components related to them. The data was collected by registering the movement patterns of 68 participants who were in a virtual house doing a search task. The experiential side of the VE was measured with the Experimental Virtual Environment Questionnaire (EVEQ). Four movement patterns were identified. In addition, fluent movement in VEs was related to a high sense of presence. Moreover, the participants who moved fluently in the environment assessed their skills high. The results show how movement is related the way in which people experience the VE. The movement analysis method introduced here is applicable to other related research areas as well.     

Digital‐to‐analog converter with gamma correction on glass substrate for TFT‐panel applications

Abstract— Low‐temperature polysilicon (LTPS) technology has a tendency towards integrating all circuits on glass substrate. However, the poly‐Si TFTs suffered poor uniformity with large variations in the device characteristics due to a narrow laser process window for producing large‐grained poly‐Si TFTs. The device variation is a serious problem for circuit realization on the LCD panel, so how to design reliable on‐panel circuits is a challenge for system‐on‐panel (SOP) applications. In this work, a 6‐bit R‐string digital‐to‐analog converter (DAC) with gamma correction on glass substrate for TFT‐panel applications is proposed. The proposed circuit, which is composed of a folded R‐string circuit, a segmented digital decoder, and reordering of the decoding circuit, has been designed and fabricated in a 3‐μm LTPS technology. The area of the new proposed DAC circuit is effectively reduced to about one‐sixth compared to that of the conventional circuit for the same LTPS process.     

Digital time‐modulation pixel memory circuit in LTPS technology

Abstract— A digital time‐modulation pixel memory circuit on glass substrate has been designed and verified for a 3‐μm low‐temperature polysilicon (LTPS) technology. From the experimental results, the proposed circuit can generate 4‐bit digital codes and the corresponding inversion data with a time‐modulation technique. While the liquid‐crystal‐display (LCD) panel operates in the still mode, which means the same image is displayed on the panel, a data driver for an LCD panel is not required to provide the image data of the frame by the proposed pixel memory circuit. This pixel memory circuit can store the frame data and generate its corresponding inversion data to refresh a static image without activating the data driver circuit. Therefore, the power consumption of a data driver can be reduced in the LCD panel.     

Using results of eye movement signal analysis in the neural network recognition of otoneurological patients

We extracted a collection of eye movement signals employed for almost two decades in clinical otoneurological tests at a balance laboratory. During those years we designed and programmed signal analysis methods to analyse their features in detail and to compute medically important attributes. In the present study, using such attributes and their results computed we classified test cases into groups of healthy subjects and patients with multilayer perceptron neural networks. Classification succeeded in total accuracies from 60% to 90% depending on the type of eye movements, which were saccades, nystagmus, sinusoidal movements and vestibulo-ocular reflex stimulated in two different ways; these are the chief eye movement tests applied in otoneurology.