An Overview and Future Perspectives of Aluminum Batteries

A critical overview of the latest developments in the aluminum battery technologies is reported. The substitution of lithium with alternative metal anodes characterized by lower cost and higher abundance is nowadays one of the most widely explored paths to reduce the cost of electrochemical storage systems and enable long‐term sustainability. Aluminum based secondary batteries could be a viable alternative to the present Li‐ion technology because of their high volumetric capacity (8040 mAh cm^?3 for Al vs 2046 mAh cm^?3 for Li). Additionally, the low cost aluminum makes these batteries appealing for large‐scale electrical energy storage. Here, we describe the evolution of the various aluminum systems, starting from those based on aqueous electrolytes to, in more details, those based on non‐aqueous electrolytes. Particular attention has been dedicated to the latest development of electrolytic media characterized by low reactivity towards other cell components. The attention is then focused on electrode materials enabling the reversible aluminum intercalation‐deintercalation process. Finally, we touch on the topic of high‐capacity aluminum‐sulfur batteries, attempting to forecast their chances to reach the status of practical energy storage systems.     

Evaluating medication response in ADHD: cognitive, behavioral, and single-subject methodology

We introduce a novel application for linkage analysis: using bone marrow donor-recipient sib pairs to search for genes influential in graft-versus-host disease (GVHD), a major cause of morbidity and mortality following allogeneic bone marrow transplantation. In particular, we show that transplant sib pairs in which the recipient developed severe GVHD can be used to map genes in the same way as traditional discordant (affected/unaffected) sib pairs (DSPs). For a plausible GVHD model, we demonstrate that the transplant/discordant sib pair analog of the "possible triangle test" [Holmans (1993) Am J Hum Genet 52:362-374] has similar power to that of the simpler "restricted test" proposed by Risch [(1990b) Am J Hum Genet 46:229-241; (1992) Am J Hum Genet 51:673-675]. Moreover, we show that the restricted test has superior power in much of the DSP possible triangle and significantly inferior power in only a small region. Thus, we conclude that the restricted test is preferable for localizing genes with transplant/discordant sib pairs. Finally, we examine the effects of heterogeneity on the power to detect GVHD loci and demonstrate the gain in efficiency by dividing the sample into genetically more homogeneous subgroups.     

Polymerization shrinkage and porosity profile of dual cure dental resin cements with different adhesion to dentin mechanisms

This research aims to probe the porosity profile and polymerization shrinkage of two different dual cure resin cements with different dentin bonding systems. The self‐adhesive resin cement RelyX U200 (named RU) and the conventional Allcem Core (named AC) were analyzed by x‐ray microtomography (μCT) and Scanning Electron Microscopy (SEM). Each cement was divided into two groups (n = 5): dual‐cured (RUD and ACD) and self‐cured (RUC and ACC). μCT demonstrated that the method of polymerization does not influence the porosity profile but the polymerization shrinkage. Fewer concentration of pores was observed for the conventional resin cement (AC), independently the method used for curing the sample. In addition, SEM showed that AC has more uniform surface and smaller particle size. The method of polymerization influenced the polymerization shrinkage, since no contraction for both RUC and ACC was observed, in contrast with results from dual‐cured samples. For RUD and ACD the polymerization shrinkage was greater in the lower third of the sample and minor in the upper third. This mechanical behavior is attributed to the polymerization toward the light. µCT showed to be a reliable technique to probe porosity and contraction due to polymerization of dental cements.     

Effect of frequency and environment on fatigue-crack propagation of SA533B-1 steel

The effects of a decrease in the frequency of cyclic loading on the fatigue-crack propagation characteristics of SA533B-1 steel in various environments were investigated. Frequency levels of 10 Hz, 1.0 Hz and 0.1 Hz were employed in laboratory air, distilled water and a 3.5% NaCl solution. As the loading frequency was decreased, statistically significant increases in the fatigue-crack growth rates (da/dN) for the distilled water and salt water environments, as compared to those measured in laboratory air, were observed. These increases in growth rates were limited to certain ranges of stress intensity range (ΔK) values depending upon the frequency level being tested. A hydrogen embrittlement mechanism is proposed to explain the increase in growth rates based upon a fractographic analysis.     

Mismatch negativity in the neurophysiologic/behavioral evaluation of auditory processing deficits: a case study

The subject of this case report is an 18-year-old woman with grossly abnormal auditory brain stem response (ABR), normal peripheral hearing, and specific behavioral auditory processing deficits. Auditory middle latency responses (MLRs) and cortical potentials N1, P2, and P300 were intact. The mismatch negativity (MMN) was normal in response to certain synthesized speech stimuli and impaired to others--consistent with her behavioral discrimination of these stimuli. Behavioral tests of auditory processing were consistent with auditory brain stem dysfunction. A neuropsychological evaluation revealed normal intellectual and academic performance. The subject was in her first year of college at the time of the evaluation. This case study is important because: (1) Although there have been several reports of absent/abnormal ABR with preserved peripheral hearing and deficits in auditory processing, little is known about the specific nature of the auditory deficits experienced by these individuals. Such information may be valuable to the clinical management of patients with this constellation of findings. (2) Of interest is the information that the mismatch negativity (MMN) cortical event-related potential can bring to the evaluation of patients with auditory processing deficits. The MMN reflects central auditory processing of small acoustic differences and may provide an objective measure of auditory discrimination. (3) From a theorectical standpoint, a patient with neural deficits affecting specific components of the auditory pathway provides insight into the relationship between evoked potentials and physiological mechanisms of auditory processing. How do various components of the auditory pathway contribute to speech discrimination? How might evoked potentials reflect the processes underlying the neural coding of specific features of speech stimuli such as timing and spectral cues?     

Long-term mechanical circulatory support system reliability recommendation: American Society for Artificial Internal Organs and The Society of Thoracic Surgeons: long-term mechanical circulatory support system reliability recommendation

Jointly developed by members of the American Society for Artificial Internal Organs and the Society of Thoracic Surgeons along with staff from the Food and Drug Administration, the National Heart, Lung and Blood Institute and other experts, this recommendation describes the reliability considerations and goals for Investigational Device Exemption and Premarket Approval submissions for long-term, mechanical circulatory support systems. The recommendation includes a definition of system failure, a discussion of an appropriate reliability model, a suggested in vitro reliability test plan, reliability considerations for animal implantation tests, in vitro and animal in vivo performance goals, the qualification of design changes during the Investigational Device Exemption clinical trial, the development of a Failure Modes Effects and Criticality Analysis, and the reliability information for surgeons and patient candidates. The document will be periodically reviewed to assess its timeliness and appropriateness within five years.     

Industrial radio telemetry

Industry is turning to new techniques for measuring physical quantities at relatively inaccessible locations and reading or recording them from a convenient distance. Because the distances are relatively short and transmission techniques over the radio link are inefficient, the equipment is less elaborate and costly than in space telemetry. But industrial environments and technical operating skills require most telemetry system components to be far more rugged, capable of accurate measurement with only the simplest calibration techniques.     

Apparatus for studying fretting fatique in vacuum

Recent investigations on the mechanism of fretting fatigue have indicated that mechanical damage, not chemical corrosion, has the largest effect in decreasing structural component life. Since there is no general agreement on the mechanism of fretting fatigue, an experiment has been designed to evaluate statistically the relative role of the mechanical process and the chemical process in reducing fatigue life. An initial step was to develop an apparatus that allows fretting fatigue tests to be performed in both laboratory air and vacuum environments. A detailed discussion of the experimental apparatus and experimental procedure are presented in this paper. Also typical test results are presented. It is found that fretting fatigue in vacuum is about ten times slower than that in laboratory air. Fractographic analysis of the wear surface indicated that less severe fretting damage occurred in the vacuum environment.     

High-throughput battery materials testing based on test cell arrays and dispense/jet printed electrodes

A cost effective and reliable technology for the fabrication of electrochemical test-cell arrays for battery materials research, based on batch-fabricated glass micro packages was developed and tested. Jet dispensing was investigated for the first time as a process for fabricating battery electrode arrays and separators and compared to micro dispense printing. The process shows the reproducibility over the whole range of investigated materials and battery cell structures that is required for battery materials research. Such setup gives rise to a significantly improved reliability and reproducibility of electrochemical experiments. Cost-effective fabrication of our test chips by batch processing allows for their single-use in electrochemical experiments, thereby preventing contamination issues due to repeated use as in conventional laboratory test cells. In addition, the integration of micro pseudo reference electrodes is demonstrated. Thus, the test cell array together with the developed electrode/electrolyte deposition technology provide a highly efficient tool for speedy combinatorial and high throughput testing of battery materials on a system level (full cell tests). Experimental results are shown for the microfabrication of lithium-ion test cells with help of several electrode and binder materials. The influence of jetting parameters on electrode lateral dimensions and thickness, reproducibility of the electrode mass as well as the use of integrated micro-reference electrodes for impedance spectroscopy and cyclic voltammetry measurements in micro cells are presented in detail.

     

Normal load effects in fretting fatigue of titanium and aluminum alloys

Normal pressure in the fretting fatigue process is one external variable that affects structural component life and its effect is relatively easy to study under controlled laboratory conditions. Consequently, specimens of Ti-6Al-4V (MA) and aluminum 7075-T6 were tested under varying normal pressure conditions to evaluate its effect on these two important materials.The results show that Ti-6Al-4V (MA) (mixed h.c.p. and b.c.c. structure) and aluminum (f.c.c. structure) behave differently under similar normal pressure conditions. The aluminum undergoes significant life reduction from fretting damage but appears to be insensitive to normal load changes. On the other hand, the life dependency of the titanium to fretting damage is very sensitive to normal pressure. This phenomenon is explained in terms of local crystallographic effects and microscopic variations in toughness of the two materials.