Performance analysis of trigger frame in enhanced UL and DL MU MIMO transmissions

In an Internet-of-Things (IoT) environment, congestion and scarcity problems may occur because many mobile stations (STAs) access wireless networks simultaneously. The IEEE 802.11ax/802.11be standards for large-scale wireless communications have defined a trigger frame (TF) to control multiple STAs. During resource allocation, the downlink (DL) transmission is divided in a control period from the access point (AP) to multiple STAs. The resource allocation (RA) is then assigned to an uplink (UL) transmission by a TF and a DL period from the AP to STAs. However, because the DL transmission should be considered separately in terms of the control and DL periods, it is necessary to analyze the DL transmission. We propose a scheduled MU transmission (SMT) algorithm for enhanced UL and DL MU MIMO transmissions. In this study, we analyze and systematically model medium access control (MAC) performance when the DL transmission is divided in the control and data periods when the UL coexists with the DL data transmission. To achieve this, we mathematically analyze the time-efficient throughput, estimate the transmission and collision probabilities for wireless local area network (WLAN) STAs, and generalize the transmission interval. In addition, we propose an access category (AC) for the TF that is defined in the DL transmission. All data transmissions are defined as the ACs for basic channel access, but the AC is not defined for the TF. Therefore, we clarify the transmission by defining the AC of the TF to control the UL transmissions of various STAs. Evaluation results demonstrate that the SMT algorithm can improve the MAC throughput by up to 70% – 87% compared to UL and DL MU MIMO transmissions.

     

A leakage-aware L2 cache management technique for producer-consumer sharing in low-power chip multiprocessors

This paper proposes a novel leakage management technique for applications with producer-consumer sharing patterns. Although previous research has proposed leakage management techniques by turning off inactive cache blocks, these techniques can be further improved by exploiting the various run-time characteristics of target applications in CMPs. By exploiting particular access sequences observed in producer-consumer sharing patterns and the spatial locality of shared buffers, our technique enables a more aggressive turn-off of L2 cache blocks of these buffers. Experimental results using a CMP simulator show that our proposed technique reduces the energy consumption of on-chip L2 caches, a shared bus, and off-chip memory by up to 31.3% over the existing cache leakage power management techniques with no significant performance loss.     

A deterministic channel access scheme for multimedia streaming in WiMedia networks

WiMedia MAC is an attractive transmission technology for high rate multimedia streaming and high quality consumer electronic devices in wireless personal area networks. In this paper, we propose a deterministic channel access (DCA), where all the devices determine their transmission orders in a distributed manner by exchanging beacon frames in the beacon period. Since all of the devices follow a deterministic transmission order, collision-free channel access can be achieved and thus the throughput can be significantly improved. In addition, the DCA addresses unfairness problems found in channel access by using circulating reference points. The trace-driven simulation results demonstrate that the DCA outperforms the existing channel access schemes in WiMedia MAC under different situations, especially under bursty traffic.     

Analysis of direct immobilized recombinant protein G on a gold surface

For the immobilization of IgG, various techniques such as chemical linker, thiolated protein G methods, and fragmentation of antibodies have been reported [Y.M. Bae, B.K. Oh, W. Lee, W.H. Lee, J.W. Choi, Biosensors Bioelectron. 21 (2005) 103; W. Lee, B.K. Oh, W.H. Lee, J.W. Choi, Colloids Surf. B-Biointerfaces, 40 (2005) 143; A.A. Karyakin, G.V. Presnova, M.Y. Rubtsova, A.M. Egorov, Anal. Chem. 72 (2000) 3805]. Here, we modified the immunoglobulin Fc-binding B-domain of protein G to contain two cysteine residues at its C-terminus by a genetic engineering technique. The resulting recombinant protein, RPGcys, retained IgG-binding activity in the same manner as native protein G. RPGcys was immobilized on a gold surface by strong affinity between thiol of cysteine and gold. The orientations of both IgG layers immobilized on the base recombinant protein Gs were analyzed by fluorescence microscope, atomic force microscope (AFM), and surface plasmon resonance (SPR). Our data revealed that IgG-binding activity of RPGcys on gold surface significantly increased in comparison to wild type of protein G (RPGwild), which was physically adsorbed due to absence of cysteine residue. Immobilization of highly oriented antibodies based on cysteine-modified protein G could be useful for the fabrication of immunosensor systems.     

Resistive switching memory properties of layer-by-layer assembled enzyme multilayers

The properties of enzymes, which can cause reversible changes in currents through redox reactions in solution, are of fundamental and practical importance in bio-electrochemical applications. These redox properties of enzymes are often associated with their charge-trap sites. Here, we demonstrate that reversible changes in resistance in dried lysozyme (LYS) films can be generated by an externally applied voltage as a result of charge trap/release. Based on such changes, LYS can be used as resistive switching active material for nonvolatile memory devices. In this study, cationic LYS and anionic poly(styrene sulfonate) (PSS) layers were alternately deposited onto Pt-coated silicon substrates using a layer-by-layer assembly method. Then, top electrodes were deposited onto the top of LYS/PSS multilayers to complete the fabrication of the memory-like device. The LYS/PSS multilayer devices exhibited typical resistive switching characteristics with an ON/OFF current ratio above 10(2), a fast switching speed of 100 ns and stable performance. Furthermore, the insertion of insulating polyelectrolytes (PEs) between the respective LYS layers significantly enhanced the memory performance of the devices showing a high ON/OFF current ratio of ~10(6) and low levels of power consumption.     

Remediation of TCE-contaminated groundwater using nanocatalyst and bacteria

The objective of this study was to develop and evaluate the remediation of trichloroethene (TCE)-contaminated groundwater using both a nanocatalyst (bio-Zn-magnetite) and bacterium (similar to Clostridium quinii) in anoxic environments. Of the 7 nanocatalysts tested, bio-Zn-magnetite showed the highest TCE dechlorination efficiency, with an average of ca. 90% within 8 days in a batch experiment. The column tests confirmed that the application of bio-Zn-magnetite in combination with the bacterium achieved high degradation efficiency (ca. 90%) of TCE within 5 days compared to the nanocatalyst only, which degraded only 30% of the TCE. These results suggest that the application of a nanocatalyst and the bacterium have potential for the remediation of TCE-contaminated groundwater in subsurface environments.     

Removal of COD and color from livestock wastewater by the Fenton method

The Fenton method was applied to the removal of chemical oxygen demand using chromate (CODcr) and color from high-strength livestock wastewater in which the initial CODcr was 5000-5700 mg/L. The optimum ratio of H2O2 (mg/L) to the initial CODcr was 1.05 and the optimum molar ratio of H2O2/Fe2+ was 2. The optimum initial pH and the optimum reaction time were 3.5-4 and 30 min, respectively. Under optimal conditions, the removal ratios of CODcr and color of the supernatant after static precipitation of the produced sludge were 88 and 95.4%, respectively. Addition of Fenton's reagents in several aliquots did not affect the efficiencies of CODcr and color removal.     

Performance characteristics of polymer photovoltaic solar cells with an additive-incorporated active layer

We have investigated the performance characteristics of bulk-heterojunction polymer solar cells based on poly(3-hexylthiophene-2,5-diyl) and [6,6]-phenyl C₆₁ butyric acid methyl ester by adding 1,8-octanedithiol as a processing agent in an active layer. The effects of the additive, 1,8-octanedithiol, on the device performance parameter characteristics have been discussed. The current density-voltage measurements, UV-Vis absorption spectra, X-ray diffraction spectra, and scanning probe microscope images have been used to discuss the performance characteristics of polymer solar cells.     

Analysis of Cavity‐Mode Lasing Characteristics from a Resonator with Broadband Cholesteric Liquid‐Crystal Bragg Reflectors

Detailed optical lasing characteristics in liquid crystal (LC) microlasers consisting of multiple polymer cholesteric LC (PCLC) layers are presented as broadband resonators sandwiching a layer of thick gain media, dye‐containing nematic LC (NLC) or isotropic liquid, in between. Multiple lasing emission peaks due to Fabry‐Perot cavity modes are observed for both gain media, and their polarization characteristics investigated. To analyze lasing characteristics, specified eigen modes are defined, the polarization states of which are maintained before and after passing through the broadband resonator, and obtained for the present full system by using the Berreman 4 × 4 matrix method. Using these specified eigen modes, the optical density for each mode is calculated and compared with the experimental results, and shows good agreement. Finally, lasing characteristics between the resonators with NLC and isotropic gain media are compared, and the advantages of adopting dye‐doped NLC gain medium are shown for tunable red, green, blue lasing in a microlaser system with a broadband resonator.