High-dose intranasal snorted heroin: a new cause of pancreatitis

Experimental and clinical studies have recently shown variable degrees of structural abnormalities in the transposed and chronically stimulated muscle graft after cardiomyoplasty procedure. The postoperative stimulation protocol of wrapped skeletal muscle has been claimed to be a major determinant of late structural derangement. Therefore, a modified stimulation protocol had been used after a cardiomyoplasty procedure in a 63-year-old patient. Improved postoperative hemodynamic data could be detected by pressure/volume analysis. After unexpected sudden death occurred at 15 months, autoptic examination showed preserved muscle structure, suggesting that a prudent stimulation protocol may maintain muscle viability and contribute to effective cardiac support.     

Crazing dynamics in the swelling of thermally crosslinked poly(vinyl alcohol)-poly(acrylic acid) films

A continuum kinetic model is used to describe the dynamics of crazing in a reticulated polymer film that is exposed to sudden hydration in order to form a hydrogel. The appearance of microfractures in a thermally crosslinked 80 wt% poly(vinyl alcohol)-20 wt% poly(acrylic acid) strip can be related to the internal strain of the polymer network and the thickness of the film. It is proposed that fractures are precipitated by the swelling of superficial layers of the polymeric matrix, which causes the drier middle layer to fail in tension when its yield stress is exceeded.     

The High Temperature Annular Shear Cell: A modified ring shear tester to measure the flow properties of powders at high temperature

Although changes of cohesive behaviour of powders is observed at high temperature in several industrial process units, conventional testers and procedures are still not suited for testing powder flow properties at high temperature. In this work a High Temperature Annular Shear Cell was designed, built and set-up in order to directly measure the flow properties of powders up to 500 °C. A temperature control system was also developed to establish a uniform temperature inside the powder sample.Yield loci at room temperature and 500 °C were measured for samples of fluid catalytic cracking catalyst (FCC powder), fly ashes, natural corundum, synthetic porous α-alumina and glass beads. Experimental evidences did not reveal a univocal effect of temperature in the tested range.Finally, shear tests on glass beads mixed to with some high-density polyethylene (HDPE) (1% of the total weight) confirmed that a significant increase of the cohesive behaviour occurs at high temperature when liquid bridges form due to the melting of one of the solid phases.     

The measurement of powder flow properties with a mechanically stirred aerated bed

This paper re-examines a set of experimental data published by Bruni et al., 2007a, Bruni et al., 2007b [Bruni, G., Barletta, D., Poletto, M., Lettieri, P., 2007a. A rheological model for the flowability of aerated fine powders. Chem. Eng. Sci. 62, 397–407; Bruni, G., Lettieri, P., Newton, D., Barletta, D., 2007b. An investigation of the effect of the interparticle forces on the fluidization behaviour of fine powders linked with rheological studies. Chem. Eng. Sci. 62, 387–396] carried out on a mechanically stirred fluid-bed rheometer (msFBR), which was developed to study the rheology of aerated and fluidized powders. The use of aeration below fluidization allowed to carry out experiments with powders at very low consolidation levels. Two mathematical models, based on the Janssen approach to evaluate stresses in powder containers, were developed in order to relate the torque measurements in the Fluidized Bed Rheometer to the flow properties of the powders measured with standard powder flow testers. Results indicate that the models were able to satisfactorily predict the torque measured by the msFBR. The larger complexity of the Walker (1966) [Walker, D.M., 1966. An approximate theory for pressures and arching in hoppers, Chem. Eng. Sci. 21, 975–997] and Walters (1973) [Walters, J.K., 1973. A theoretical analysis of stresses in silos with vertical walls, Chem. Eng. Sci. 28, 13–21] stress analysis adopted in one of the two models did not introduce significant improvements in the evaluation of the stress distribution to justify its use. A procedure for the inverse application of the model was developed and applied to estimate the powder flow properties starting from msFBR data. The application of this procedure provided good results in terms of effective angle of internal friction and is promising for the ability of the system to explore powder flow at very low consolidation states.     

Information fusion for computer security: State of the art and open issues

In this paper, we critically review the issue of information fusion for computer security, both in terms of problem formulation and in terms of state-of-the-art solutions. We also analyze main strengths and weaknesses of currently used approaches and propose some research issues that should be investigated in the future.     

Mechanical ventilation and thoracic artificial lung assistance during mechanical circulatory support with PUCA pump: In silico study

Patients assisted with left ventricular assist device (LVAD) may require prolonged mechanical ventilatory assistance secondary to postoperative respiratory failure. The goal of this work is the study of the interdependent effects LVAD like pulsatile catheter (PUCA) pump and mechanical ventilatory support or thoracic artificial lung (TAL), by the hemodynamic point of view, using a numerical simulator of the human cardiovascular system. In the simulator, different circulatory sections are described using lumped parameter models. Lumped parameter models have been designed to describe the hydrodynamic behavior of both PUCA pump and thoracic artificial lung. Ventricular behavior atrial and septum functions were reproduced using variable elastance model. Starting from simulated pathological conditions we studied the effects produced on some hemodynamic variables by simultaneous PUCA pump, thoracic artificial lung or mechanical ventilation assistance. Thoracic artificial lung was applied in parallel or in hybrid mode. The effects of mechanical ventilation have been simulated by changing mean intrathoracic pressure value from −4 mmHg to +5 mmHg. The hemodynamic variables observed during the simulations, in different assisted conditions, were: left and right ventricular end systolic (diastolic) volume, systolic/diastolic aortic pressure, mean pulmonary arterial pressure, left and right mean atrial pressure, mean systemic venous pressure and the total blood flow. Results show that the application of PUCA (without mechanical ventilatory assistance) increases the total blood flow, reduces the left ventricular end systolic volume and increases the diastolic aortic pressure. Parallel TAL assistance increases the right ventricular end diastolic (systolic) volume reduction both when PUCA is switched “ON” and both when PUCA is switched “OFF”. By switching “OFF” the PUCA pump, it seems that parallel thoracic artificial lung assistance produces a greater cardiac output (respect to hybrid TAL assistance).