Isolated hepatic tuberculosis mimicking liver tumors in a dialysis patient

Cases of isolated hepatic tuberculosis (TB) are rare. The diagnosis is often delayed or missed because of nonspecific symptoms and laboratory findings. Besides, the disease is extremely rare even in a country where TB is an alarming public health problem. This report demonstrates the difficulty in correctly diagnosing local hepatic TB. We report the case of a 62‐year‐old male patient with end‐stage renal disease treated with hemodialysis, who developed 2 months of abdominal distension and general anorexia, with hyperechoic hepatic lesions on ultrasound. Computed tomography suspected multiple liver tumors. The liver biopsy finally led to the diagnosis of TB of the liver without other involvements. We conclude that isolated hepatic TB is one of the rare forms of extrapulmonary TB in dialysis patients. A greater awareness of this rare clinical entity may prevent needless surgical interventions.     

Comprehensiveness and uniqueness of commercial databases and open access systems

Scientometrics - In this study, scholarly communication systems provided by commercial services and open access systems are examined on the basis of the comprehensiveness and uniqueness of their...     

Effects of the hob cutter regrinding and setting on ZE-type worm gear manufacture

A mathematical model for a ZE-type worm gear set is proposed. The characteristics of a ZE-type worm gear cut with an oversize hob cutter are investigated. Bearing contacts and kinematic errors in the ZE-type worm gear set due to regrinding of oversize hob cutters are also studied. Bearing contacts in the worm gear set were obtained using surface separation topology techniques and tooth contact analysis. It was found that bearing contact locations are sensitive to the hob cutter setting angle and setting distance. Kinematic error minimization was achieved modifying worm normal tooth angle. By applying the optimization theorem and computer simulation programs, optimum hob cutter settings and worm normal tooth angle were determined to improve bearing contact location and minimize the worm gear set kinematic errors. A numerical example is given to demonstrate the results of the investigation. The developed computer-aided manufacture program has successfully been applied to the worm gear manufacture and hob cutter design.     

Surgical treatment and outcome in patients with a hepatocellular carcinoma greater than 10 cm in diameter

BACKGROUND: Hepatocellular carcinoma (HCC) over 10 cm in diameter at the time of diagnosis continues to account for a number of patients undergoing hepatic resection. This study evaluated the clinicopathological features and outcome following surgery for large HCC. METHODS: Forty patients with a large HCC (greater than 10 cm) (group 1) resected between 1991 and 1996 were studied retrospectively. They were compared with 245 patients who had smaller HCCs (10 cm or less) (group 2). RESULTS: No patient in group 1 had hepatitis C infection compared with 22.9 per cent in group 2 (P=0.001). Patients in group 1 were significantly younger, had higher alpha-fetoprotein levels (16750 versus 1864 ng/ml; P < 0.001), better liver function, a higher incidence of multiple tumours (27 of 40 versus 42.0 per cent; P=0.003) and venous invasion (35 of 40 versus 52.2 per cent; P < 0.001), and underwent more major resections (37 of 40 versus 26.5 per cent; P < 0.001) than those in group 2. Morbidity and mortality rates and hospital stay were comparable in the two groups. For group 1, the 1-, 3- and 5-year disease-free survival rates were 42, 30 and 28 per cent respectively. Multiple tumours, venous invasion and impaired liver function were factors associated with recurrence. CONCLUSION: Large HCC had specific clinicopathological features. In selected patients, resection is safe and offers the chance of long-term disease-free survival.     

Novel positive‐working aqueous‐base developable photosensitive polyimide precursors based on diazonaphthoquinone‐capped polyamic esters

Novel positive‐working aqueous‐base developable photosensitive polyimide (PSPI) precursors based on partially diazonaphthoquinone (DNQ)‐capped polyamic esters bearing phenolic hydroxyl groups and a DNQ photosensitive compound (PIC‐3) were developed. The partially DNQ capped polyamic esters were prepared from an esterification reaction of 1,2‐naphthoquinone diazide‐5‐sulfonyl chloride with the polyamic esters. The partially DNQ capped polyamic esters decreased the dark film loss effectively in the aqueous‐base developer and were able to make thicker film resists compared to the uncapped polyamic esters. The 25 mol % DNQ‐capped BisAPAF–PMDA polyamic ester and BisAPAF–ODPA polyamic ester containing 25 wt % PIC‐3 photosensitive compound showed a sensitivity of 176 and 185 mJ/cm², and a contrast of 1.68 and 1.02, respectively, in a 3‐μm film with 1.25 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 5 μm was obtained from both PSPI precursor compositions. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2293–2300, 2003     

Synthesis of copolyimide containing fluorine and naphthalene with synergizing effect on dielectric constants

Summary Novel copolyimides containing fluorine and naphthalene groups were synthesized from 4,4-(Hexafluoroisopropylidene)diphthalic dianhydride (6FDA) and two diamines, 1,4-Bis(4-amino-2-trifluoromethylphenoxy) benzene (BATB) and 2,7-bis(4-aminophenoxy) naphthalene (BAPN) in various ratios via thermal imidization. The introduction of fluorinated groups into dianhydride improved transparency of copolyimides. All films are transparent. The structures and physical properties of copolyimides were characterized by FT-IR, DSC, TGA, XRD, UV-Vis and dielectric analyzer to study the effect of diamines on the physical properties of modified polymers. Copolyimides containing a higher percentage of BAPN have higher glass transition temperature and are less soluble in organic solvents. The copolyimide consisting of 50/50 mole% of BATB/BAPN has the lowest dielectric constant (2.60 at 1 KHz), reflecting the synergizing effect from both diamines.     

Synthesis and properties of liquid crystalline polymers with low Tm and broad mesophase temperature ranges

Novel thermotropic liquid crystalline polymers (TLCP) with improved processability and lower cost than Vectra^® were synthesized by esterification and melt polycondensation. Aromatic compounds, 6-hydroxyl-2-naphthoic acid, 2,6-naphthlenedicarboxylic acid, 4-hydroxybenzoic acid or terephthalic acid, were used as polycyclic stiff rod-like mesogenic groups. Aliphatic diol, ethylene glycol or 1,4-butanediol was used as flexible spacers to form semi-flexible main chain TLCP. The LCP products were characterized by FT-IR and ¹H NMR to identify their chemical structures. The analytical results showed the polymers had inherent viscosities of 0.35-0.54 dL/g. The crank shaft structure of the naphthalene decreased the melting temperature (T_m) of LCP (181-272 °C) to facilitate extrusion or injection molding, and maintained relatively high heat deflection temperature for high performance engineering plastics applications. The 5% weight loss decomposition temperatures were above 400 °C. LCPs have good solvent resistance and low hygroscopicity. The SEM morphology showed strong orientation on the surface in the flow direction and many micro-fibers structure in a sectional drawing. The optical textures of polymers observed by POM revealed a strong birefringence in the melts and indicated that they form nematic mesophase. All polymers have broad mesophase temperature (ΔT_meso) ranges.     

Synthesis and properties of polyimide (containing naphthalene) nanocomposites with organo‐modified montmorillonites

2,7‐Bis(4‐aminophenoxy) naphthalene (BAPN), a naphthalene‐containing diamine, was synthesized and polymerized with a 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) to obtain a polyimide (PI) via thermal imidization. To enhance the thermal and mechanical properties of the polymer, PI–Montmorillonite (MMT) nanocomposites were prepared from a DMAc solution of poly(amic acid) and a DMAc dispersion of MMT, which were organo‐modified with various amounts of n‐dodecylamine (DOA) or cetylpyridium chloride (CPC). FTIR, XRD, and TEM (transmission electron microscopy) were used to verify the incorporation of the modifying agents into the clay structure and the intercalation of the organoclay into the PI matrix. Results demonstrated that the introduction of a small amount of MMT (up to 5%) led to the improvement in thermal stability and mechanical properties of PI. The decomposition temperature of 5% weight loss (T_d,5%) in N₂ was increased by 46 and 36°C in comparison with pristine PI for the organoclay content of 5% with DOA and CPC, respectively. The nanocomposites were simultaneously strengthened and toughened. The dielectric constant, CTE, and water absorption were decreased. However, at higher organoclay contents (5–10%), these properties were reduced because the organoclay was poorly dispersed and resulted in aggregate formation. The effects of different organo‐modifiers on the properties of PI–MMT nanocomposite were also studied; the results showed that DOA was comparable with CPC. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Synthesis and characterization of a positive‐working,aqueous‐base‐developable photosensitive polyimide precursor

A positive‐working, aqueous‐base‐developable photosensitive polyimide precursor based on poly(amic ester)‐bearing phenolic hydroxyl groups and a diazonaphthoquinone photosensitive compound was developed. The poly(amic ester) was prepared from a direct polymerization of 2,2′‐bis‐(3‐amino‐4‐hydroxyphenyl)hexafluoropropane and bis(n‐butyl)ester of pyromellitic acid in the presence of phenylphosphonic dichloride as an activator. Subsequently, the thermal imidization of the poly(amic ester) precursor at 300°C produced the corresponding polyimide. The inherent viscosity of the precursor polymer was 0.23 dL/g. The cyclized polyimide showed a glass‐transition temperature at 356°C and a 5% weight loss at 474°C in nitrogen. The structures of the precursor polymer and the fully cyclized polymer were characterized by Fourier transform infrared spectroscopy and ¹H‐NMR. The photosensitive polyimide precursor containing 25 wt % diazonaphthoquinone photoactive compound showed a sensitivity of 150 mJ/cm² and a contrast of 1.65 in a 3 μm film with 1.25 wt % tetramethylammonium hydroxide developer. A pattern with a resolution of 10 μm was obtained from this composition. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 352–358, 2002