Detection of Multiple Blockages in Parallelized Microreactors

In a plant consisting of parallelized microreactors (MRs), the product quality is lowered because of a lack of flow uniformity among them when blockage occurs. It is not practical to install sensors in every MR from the viewpoint of cost when detecting the blocked MRs. In the previous study, the multiple blockage detection (MBD) method using a small number of sensors was proposed, but its performance became low when the number of sensors decreased. Here, the conventional algorithm for MBD is improved by considering the process behavior on blockage occurrence, and the effectiveness of the improved algorithm is demonstrated through a numerical case study. The effects of flow distributor types and sensor types on the MBD performance are numerically investigated.     

Numerical analysis of two-dimensional steady-state and transient heat transfer in a parallel duct filled with pressurized He II

Analysis on steady-state and transient heat transfer on a flat plate at the middle of a parallel duct immersed in He II was performed for bath temperatures from 1.8 to 2.1 K at 101.3 kPa. Two-dimensional computer code named SUPER-2D developed by the authors based on the two-fluid model and the theory of mutual friction was used. Steady-state critical heat flux (CHF) and the time lag from the application of a step heat input to λ transition, that is called a lifetime, were obtained numerically for various step heat fluxes and for the channel gaps from 2 to 20 mm. Effect of the gap restriction on the CHF and the lifetime were clarified. The solutions were compared with the experimental data for the ducts with the same structures and the corresponding conditions. They agreed well with the experimental data. The heat transport mechanism in the parallel duct was clarified.     

Synthesis, structure and antitumor activity of a new water-soluble platinum complex, (1R,2R-cyclohexanediamine-N,N'')[2-hydroxy-4-oxo-2-pentenoato(2-)-O2] platinum(II)

Patients with thalassemia major require multiple blood transfusions leading to hemochromatosis. These patients often have pubertal delay and growth failure, the etiology of which has not been fully elucidated. We performed an extensive endocrine evaluation which included measurements of spontaneous and stimulated levels of gonadotropins, GH, thyroid hormone, and adrenal hormones in 17 patients between the ages of 12 and 18 yr with hemochromatosis receiving desferoxamine therapy. All of the 17 patients had at least one endocrine abnormality, and 12 had more than one abnormality. Abnormalities of the hypothalamic-pituitary-gonadal axis were the most common. Six patients had clinical evidence of delayed puberty with spontaneous and stimulated gonadotropin and sex steroid levels appropriate for their delayed pubertal stage. All 14 children in puberty LH pulsatility index below the mean for pubertal stage compared to normal children. Six of the 14 had LH pulsatility index more than 2 SD below the mean for pubertal stage. This may be an indicator of abnormal pituitary function. Six patients failed either the provocative GH tests (peak GH < 7 micrograms/L) or had a mean spontaneous GH less than 1 microgram/L. The 4 patients who failed provocative tests had growth velocities more than 2 SD below the mean for bone age. Three patients had evidence of primary hypothyroidism. We conclude that all patients with hemochromatosis need periodic careful endocrine evaluations because the incidence of endocrine dysfunction is substantial and they may benefit from hormonal therapy.     

Surgical navigation by autostereoscopic image overlay of integral videography

This paper describes an autostereoscopic image overlay technique that is integrated into a surgical navigation system to superimpose a real three-dimensional (3-D) image onto the patient via a half-silvered mirror. The images are created by employing a modified version of integral videography (IV), which is an animated extension of integral photography. IV records and reproduces 3-D images using a microconvex lens array and flat display; it can display geometrically accurate 3-D autostereoscopic images and reproduce motion parallax without the need for special devices. The use of semitransparent display devices makes it appear that the 3-D image is inside the patient's body. This is the first report of applying an autostereoscopic display with an image overlay system in surgical navigation. Experiments demonstrated that the fast IV rendering technique and patient-image registration method produce an average registration accuracy of 1.13 mm. Experiments using a target in phantom agar showed that the system can guide a needle toward a target with an average error of 2.6 mm. Improvement in the quality of the IV display will make this system practical and its use will increase surgical accuracy and reduce invasiveness.     

Molecular cloning and characterization of rat lin-10

In Caenorhabditis elegans, the vulval induction is mediated by tyrosine kinase receptor/Ras signal transduction pathway composed of the lin-3, let-23, and let-60 products. In addition to these gene products, the lin-2, lin-7, and lin-10 products are also implicated in this pathway. Lin-2 encodes a MAGUK and lin-7 encodes a small protein with one PDZ domain. The lin-10 product has no homology to known proteins. Here, we have cloned a rat homologue of the lin-10 product and characterized it. Rat lin-10 is ubiquitously expressed in various rat tissues and distributed in both the cytosol and membrane fractions. In brain, however, rat lin-10 is distributed only in the membrane fraction and enriched in the synaptic plasma membrane and postsynaptic density fractions. These results suggest that rat lin-10 is involved at least in synaptic functions in brain.     

The evaluation of weekly hepatic arterial infusion of high-dose 5-FU for liver metastases from colorectal cancer

OBJECTIVE: The degree to which patient education in the areas of diet, exercise, and stress management can improve symptoms of irritable bowel syndrome (IBS) through healthier lifestyle behaviors is unknown. The aim of this study was to determine the effects of outpatient education on the short and long term outcomes, and the association between health-promoting behaviors and symptoms. METHODS: Pender's Health Promotion Model provided the theoretical framework. The study had a prospective longitudinal design. A consecutive sample of 52 adult outpatients with IBS attended a structured class that taught health-promoting modifications of lifestyle. Participants completed the Health-Promoting Lifestyle Profile (HPLP) and selected items from a Bowel Disease Questionnaire (BDQ) before the class and 1 month and 6 months later. Spearman rank correlations were used to assess the association between HPLP and symptom scores. Wilcoxon rank sum tests compared changes in scores versus their baseline values. RESULTS: Response rates at 1 and 6 months were 75% and 83%, respectively. Results revealed significant 1- and 6 month-improvements in pain and Manning symptoms (p < 0.01) and in some HPLP scores (exercise at 1 month, p < 0.05; stress management at 6 months, p < 0.01). Significant associations were found between some, but not all, HPLP and symptom scores over time. CONCLUSION: A structured IBS educational class for patients with IBS improved symptoms and some health-promoting behaviors. However, relationships among specific behaviors and specific symptoms did not consistently correspond with this improvement.     

New polylactide/layered silicate nanocomposites. 5. Designing of materials with desired properties

Understanding the structure/property relationship in polymer/layered silicate nanocomposites is of great importance in designing materials with desired properties. In order to understand these relations, a series of polylactide (PLA)/organically modified layered silicate (OMLS) nanocomposites have been prepared using a simple melt extrusion technique. Four different types of OMLS have been used for the preparation of nanocomposites, three were modified with functionalized ammonium salts while fourth one was a phosphonium salt modified OMLS. The structure of the nanocomposites in the nanometer scale was characterized by using wide-angle X-ray diffraction and transmission electron microscopic observations. Using four different types of layered silicates modified with four different types of surfactants, the effect of OMLS in nanocomposites was investigated by focusing on four major aspects: structural analysis, thermal properties and spherulite morphology, materials properties, and biodegradability. Finally, we draw conclusions about the structure/property relationship in the case of PLA/OMLS nanocomposites.     

SEPARATION AND ENRICHMENT OF WEAK ORGANIC ACIDS OR BASES BY IMMOBILIZED LIQUID MEMBRANES

A new and effective liquid membrane process to achieve both separation and enrichment simultaneously of weak organic acids or bases was developed. The process utilizes effectively the difference in the apparent partition coefficient of the constituent species between the aqueous and organic phases, and uses the change of the apparent partition coefficients with the hydrogen ion concentration of the aqueous phase. For such a fundamental model apparatus as a diaphragm diffusion cell being operated batch wise, the effects of pK value of solutes, permeability of solutes through the membrane, volume ratio of liquids in two aqueous phases, and pH value of aqueous phase on enrichment factor and selectivity for the solute to be concentrated were discussed analytically. Separation and enrichment were demonstrated using aqueous mixed solutions of fumaric acid and L-malic acid. The results were in good agreement with the theoretical predictions.     

Concentration of acetic acid in sulfite pulp evaporation drain by reverse osmosis

The evaporation drain of sulfite pulp spent liquor contains few volatile fatty acids, most of which is acetic acid. The main objective of this study is to recover acetic acid as the concentrated solution (about 4%), which could be used as a culture medium of the yeast. As acetic acid can easily pass through the cellulose acetate membrane, SP drains neutralized by NaOH, NH₄OH and Ca(OH)₂ were used as the feed solutions. In all cases, concentration by reverse osmosis was successfully carried out provided the appropriate pretreatment was employed. The recovery of acetic acid was 95.6, 90.5 and 98.2% for Na-, NH₄-, and Ca-drain, respectively. In addition, the recovered (permeated) water may be used as an industrial one.