A 1.5-V full-swing BiCMOS logic circuit

A BiCMOS logic circuit applicable to sub-2-V digital circuits has been developed. A transiently saturated full-swing BiCMOS (TS-FS-BiCMOS) logic circuit operates twice as fast as CMOS at 1.5-V supply. A newly developed transient-saturation technique, with which bipolar transistors saturate only during switching periods, is the key to sub-2-V operation because a high-speed full-swing operation is achieved to remove the voltage loss due to the base-emitter turn-on voltage. Both small load dependence and small fan-in dependence of gate delay time are attained with this technique. A two-input gate fabricated with 0.3-μm BiCMOS technology verifies the performance advantage of TS-FS-BiCMOS over other BiCMOS circuits and CMOS at sub 2-V supply     

Development of a new advanced process for manufacturing polyacetal resins. Part III. End-capping during polymerization for manufacturing acetal homopolymer and copolymer

Conventionally, acetal homopolymer or copolymer is obtained by the polymerization of formaldehyde or trioxane, following the end-capping using acetic anhydride or unzipping of the unstable polymer end fraction. First, Asahi Chemical developed a new process to obtain an end-capped polymer during polymerization of highly purified formaldehyde using acetic anhydride as the chain-transfer agent. Use of highly purified formaldehyde and endcapping during polymerization using acetic anhydride as a chain-transfer agent or an endcapping agent will provide a simple process for manufacturing acetal homopolymer. The polymerization mechanism was confirmed by infrared spectroscopy analysis and proton NMR analysis of the polymer obtained. Second, for the acetal copolymer, purified trioxane was copolymerized with ethylene oxide in the presence of methylal, which gave an endcapped polymer with high thermal stability. Two new intermediates from the initiation reaction of the copolymerization, 1,3,5,7-tetraoxacyclononane (TOCN) and 1,3,5,7,10-pentaoxacyclododecane (POCD), were isolated and a new initiation mechanism was proposed. © 1993 John Wiley & Sons, Inc.     

Role of conserved Asn-Tyr-Asp-Tyr sequence in bacterial copper/2,4, 5-trihydroxyphenylalanyl quinone-containing histamine oxidase

Copper amine oxidase contains a covalently bound quinonoid cofactor, 2,4,5-trihydroxyphenylalanyl quinone (TPQ), which is synthesized by post-translational modification of a specific tyrosyl residue occurring in the highly conserved sequence, Asn-Tyr-(Asp/Glu)-Tyr. To elucidate the role(s) of the conserved sequence in the biogenesis of TPQ, each of the corresponding residues at positions 401-404 in the recombinant histamine oxidase from Arthrobacter globiformis has been replaced with other amino acids by site-directed mutagenesis. When Asn-401 was changed to Asp or Gln, the rate of TPQ formation by copper-dependent self-processing was 10(3)- to 10(4)-fold slower than in the wild-type enzyme. When Tyr-402 was replaced by Phe, TPQ was not formed at all, showing that Tyr-402 is essential as the precursor to TPQ. In contrast, Asp-403 could be replaced by Glu without changes in the rate of TPQ formation, whereas its replacement by Asn led to a marked decrease. Furthermore, when Tyr-404 was changed to Phe, TPQ was formed swiftly on incubation with copper ions, but the TPQ enzyme exhibited very low activity with altered substrate specificity. These results collectively indicate that a very rigorous structural motif is required for efficient formation of TPQ and for the catalytic activity in the active site of copper amine oxidases.     

The role of repeat transurethral resection in stage A1 carcinoma of the prostate

In order to evaluate the significance of repeat transurethral resection (TUR) in differentiating stage A1 prostatic adenocarcinoma from those with stage A2, we performed repeat TUR in 34 patients with an initial diagnosis of stage A1 prostatic adenocarcinoma. It was found that residual adenocarcinoma was present in five cases (14.7%), but the diagnosis was changed from stage A1 to stage A2 in only one case (2.9%). In one patient with final diagnosis of stage A1 carcinoma, bone metastases were detected seven months after the repeat TUR. It was concluded that repeat TUR for stage A1 prostatic adenocarcinoma did not yield clinically significant information.     

Expression of the active form of MMP-2 on the surface of leukemic cells accounts for their in vitro invasion

Antibodies reactive with peptide epitopes on the core protein of MUC1 epithelial mucin have been demonstrated in some patients with adenocarcinomas. Because these epitopes can be exposed on MUC1 in the serum of healthy women, we measured concentrations of MUC1-reactive antibodies in the serum of healthy pregnant and non-pregnant women, and in patients with benign and malignant ovarian tumours. Antibodies were measured in an enzyme-linked immunosorbent assay utilising a synthetic peptide corresponding to a 105-amino-acid segment of the MUC1 tandem repeat region (5.25 repeats). MUC1-reactive antibodies were always of an IgM isotype and concentrations were highest in young healthy women and declined progressively with age (P=0.0006) concomitantly with increasing serum MUC1 levels (P=0.003). Regardless of age, antibody levels were lower in cancer patients than in healthy women (P<0.0001), but MUC1 levels were much higher in cancer patients (P<0.0001). Although high antibody levels were associated with greater survival in ovarian cancer (P=0.015), multivariate regression analysis showed that this was not a significant independent prognostic indicator after consideration of the International Federation of Gynaecology and Obstetrics (FIGO) stage, histological type, serum MUC1 levels and age. Serial measurement of MUC1 and MUC1 antibodies during treatment in 18 patients with ovarian cancer and throughout pregnancy in 10 women showed a negative correlation between alterations in MUC1 and MUC1 antibodies. These results show that MUC1-peptide-reactive antibodies are present in the serum of healthy women and women with cancer and that they probably form immune complexes with MUC1, but provide no evidence for an augmentation of the humoral immune response to MUC1 in ovarian cancer     

Early local recurrence of rectal cancer showing extremely rapid growth after curative surgery: report of a case

We report herein the case of a 59-year-old woman who developed a local recurrence of rectal cancer which showed extremely rapid growth. The patient had undergone a curative low anterior resection with total mesoexcision, and was discharged on postoperative day 25 after an uneventful recovery. However, 2 months after the operation, she developed bleeding from the rectum during defecation, the quantity of which gradually increased. A colonoscopy performed during the fifth postoperative month revealed a circular tumor at the suture line. The tumor was unresectable because it had firmly invaded not only the sacrum, but also the right ureter. Despite the administration of 5-fluorouracil and leucovorin, the patient died of cancer 18 months after her initial surgery. Considering that local recurrence of rectal cancer does not usually occur within 1 year after surgery, this case is unusual because the local recurrence developed very early and showed extremely rapid growth, occupying the entire lumen of the rectum by the time it was detected by colonoscopy during the fifth postoperative month.     

Elevated expression of epidermal ornithine decarboxylase mRNA in scleroderma

Using in situ hybridization techniques, we examined the expression of ornithine decarboxylase (ODC) mRNA in the skin of five patients with systemic sclerosis (SSc) and five normal controls. Sections treated with an anti-sense probe showed concentrated grains exclusively in the epidermis of SSc patients, but not in that of normal controls. Because our subcloned anti-sense probe specifically hybridizes with ODC mRNA, these findings indicate that the expression of ODC mRNA is elevated in SSc epidermis. Possibly polyamines have an important part to play in the skin changes of SSc.     

Large magnetoresistivity of sputtered Al-(O or N)-Bi alloys

Application of the sputtering technique to (Al₂O₃)_xBi_100–x and (AIN)_x Bi_100–x (x = 0 to 100%) has been found to result in the formation of a duplex material consisting of hexagonal bismuth particles dispersed finely and homogeneously in amorphous Al_xO_y and Al_xN_y matrices. The particle size and interparticle distance of the bismuth phase were about 5 to 140nm and 5 to 35 nm. The duplex alloys have high electrical resistivities ranging from 1.82 × 10³ to 3.16 × 10⁵ cm combined with a negative temperature-dependent resistivity of 148 to 342% of ₂₇₃. Furthermore, all the Al-O-Bi and Al-N-Bi alloys have been found to exhibit a positive magnetoresistive change and the maximum value, (H), at 4.2 K and 7.5T reaches 5.85 × 10⁴ cm for (Al-O)_65.7Bi_34.3 and 1.99 × 10⁵ cm for (Al-N)_69.7 Bi_30.3. The large magnetoresistivities are probably due to the unique sputtered structure consisting of metallic bismuth particles with a long mean free path of electrons embedded finely and homogeneously in amorphous Al_xO_y or Al_xN_y matrix, resulting in the large difference of the relaxation times (different mobilities) of electron carriers. It has thus been demonstrated that the oxide- or nitride-based composite materials exhibiting large magnetoresistivities, which cannot be achieved in metallic composite materials, are obtained by sputtering simultaneously Al₂O₃ or AIN and bismuth which is immiscible to aluminium.     

Microstructure and superconducting properties of rapidly-quenched copper-based alloys containing immiscible lead and bismuth elements

Copper-based superconducting alloys including finely dispersed f c c lead or h c p (Pb- Bi) particles in f c c copper matrix have been obtained by rapid quenching (Cu-M)_100-x Pb_x and (Cu-M)_100-x (Pb_0.6Bi_{0.4 x} (M = aluminium, silicon or tin;x < 10 at%) alloys containing immiscible elements such as lead and bismuth. The particle size and interparticle distance were about 30 to 130 nm and 20 to 200 nm for had particles and about 30 to 60 nm and 30 to 150 nm for (Pb- Bi) particles. The transition temperature,T _c, was in the range of 3.2 to 5.5 K for the Cu-M-Pb alloys and 6.2 to 6.3 K for the Cu-M-Pb-Bi alloys. Critical magnetic field,H _c2, and critical current density,J _c, for the later alloys were 0.47 to 0.93T at 4.2 K and 1.1 × 10⁵ to 2.7 × 10⁵ Am^–2 at zero applied field and 4.21 K. The mechanism of the appearance of such a soft-type superconductivity for the rapidly quenched copper-based alloys was discussed, and inferred to be due to the formation of a percolation path of a superconducting lead or Pb-Bi phase along the grain boundaries, sub-boundaries and/or tangled dislocations where the lead or Pb-Bi phase precipitated preferentially, rather than the proximity effect based on lead or Pb-Bi particles.