The intra-aortic antibacterial therapy of wounded patients with gunshot meningoencephalitis

The original decision of permanent introduction of antibacterial means to tissues of brain at gunshot meningoencephalitis is offered. For antibacterial therapy the intra-aortal catheter with diameter of 2,5 mm (through a.femoralis) was introduced. After washing the catheter by solution of crystalloid with heparin the various combinations of preparations in 5% solution of glucose were introduced: cephalosporin--8 g/day; hentamicin and brumacilin--240 mg/day accordingly, amicacin--1500 mg/day. Speed of introduction--20-50 mg/h, total volume--500 ml. The catheter was in aorta not more than 10 days, maximum--14 days. A described technique was applied in Burdenko Main Military Clinical Hospital on 34 wounded in head. At computer tomography of brain of all wounded intracranially the splinters and bullets were revealed, clinically--meningoencephalitis. Foreign bodies have been extracted after cupping of clinical and laboratory signs of meningoencephalitis. The authors consider, that the technique is effective not only at wounds of brain, but also at suppurative meningoencephalitis of other etiology.     

Corundum hydraulically hardening rammed compounds with a reduced grain size

Conclusions The production and use of rammed hydraulically hardening corundum compounds with different maximum grain sizes (from 1 to 7 mm) permits intermediate repairs of the linings of ladles of a steel ladle treatment unit, increasing their life.It is possible to determine the quantity of binder for obtaining the maximum strength by calculation by use of the coefficient of optimization, which is the portion of binder required per unit of specific surface of the mixture of filler grains. For the corundum hydraulically hardening compounds the optimum value of this coefficient is 0.8–1.2.Translated from Ogneupory, No. 2, pp. 40–43, February, 1987.     

Effect of vanadium and chromium on the microstructural features of V–Cr–Mn–Ni spheroidal carbide cast irons

The objective of this investigation is to study the influence of vanadium（5.0wt%–10.0wt%） and chromium（0–9.0wt%） on the microstructure and hardness of Cr-V-Mn-Ni white cast irons with spheroidal vanadium carbides. The alloys＇ microstructural features are presented and discussed with regard to the distribution of phase elements. The structural constituents of the alloys are spheroidal VC, proeutectoid cementite, ledeburite eutectic, rosette-shaped carbide eutectic（based on M7C3）, pearlite, martensite, and austenite. Their combinations and area fraction（AF） ratios are reported to be influenced by the alloys＇ chemical composition. Spheroidized VC particles are found to be sites for the nucleation of carbide eutectics. Cr and V are shown to substitute each other in the VC and M7C3 carbides, respectively. Chromium alloying leads to the formation of a eutectic（γ-Fe ＋ М7С3）, preventing the appearance of proeutectoid cementite in the structure. Vanadium and chromium are revealed to increase the total carbide fraction and the amount of austenite in the matrix. Cr is observed to play a key role in controlling the metallic matrix microstructure.     

Lactic acid production using free cells of bacteria and filamentous fungi and cells immobilized in polyvinyl alcohol cryogel: A comparative analysis of the characteristics of biocatalysts and processes

The results from studies and a comparative analysis of process characteristics are presented for lactic acid (LA) production from glucose, performed under batch conditions of the long-duration use of different biocatalyst samples comprising cells of Lactobacillus сasei bacteria and Rhizopus oryzae filamentous fungi immobilized in polyvinyl alcohol (PVA) cryogel or applied as concentrated suspensions. It is established that for LA production, the bacteria and fungi must be used in the form of PVA-cryogel-immobilized cells because their half-life in this form is considerably longer than that of concentrated cell suspensions. After 200 h of the batch use of the same immobilized cell samples, the amounts of accumulated LA were similar for both fungal (920 ± 5 g) and bacterial (895 ± 5 g) biocatalysts. The fungal biocatalyst, however, was characterized by a twice higher rate of substrate conversion to product (0.92 g LA per 1 g glucose) than the bacterial biocatalyst. The half-life of the immobilized fungal biocatalyst was 80 days (96 working cycles), ten times longer than that of the bacterial biocatalyst. A comparison of our data and the literature data demonstrated the promise of using fungal cells immobilized in PVA cryogel to produce LA: the process based on their use is superior to all known processes in its main indicators, i.e., the rate of LA conversion to glucose and the maximum accumulated concentration of the product.     

Testing metal-dielectric-semiconductor tunnel structures on p-silicon as nuclear particle detectors

Metal-dielectric-semiconductor (MDS) structures with aluminum nitride (AlN) as a tunnel dielectric based on high-ohmic p-type silicon substrates have been studied. The samples were characterized with respect to the charge collection efficiency and energy resolution on probing with 5.4-MeV α particles. In addition, the nature of noises and the state of the AlN-p-Si interface were investigated. It is established that the parameters of these MDS structures as radiation detectors are close to those of widely used Schottky-barrier detectors based on n-Si (Au-n-Si). A decrease in the concentration of deep centers at the AlN-p-Si interface allows the proposed MDS structures to compete successfully with n-Si based detectors, which is due to a higher purity of the initial material.     

The CLAS forward electromagnetic calorimeter

The CEBAF Large Acceptance Spectrometer (CLAS) at Jefferson Lab utilizes six iron-free superconducting coils to provide an approximately toroidal magnetic field. The six sectors are instrumented individually to form six independent spectrometers. The forward region (8°<θ<45°) of each sector is equipped with a lead–scintillator electromagnetic sampling calorimeter (EC), 16 radiation lengths thick, using a novel triangular geometry with stereo readout. With its good energy and position resolution, the EC is used to provide the primary electron trigger for CLAS. It is also used to reject pions, reconstruct π° and η decays and detect neutrons. This paper treats the design, construction and performance of the calorimeter.     

Highly concentrated populations of <Emphasis Type="Italic">Aureobasidium pullulans</Emphasis> cells in biocatalytic pullulan production processes

Results are presented from studies and a comparative analysis of highly concentrated populations of free and immobilized Aureobasidium pullulans Y-4137 cells in the biocatalytic processes of pullulan production in glucose-containing media. The possibility of effectively using the developed biocatalyst in the form of immobilized cells is demonstrated. The process characteristics are determined for pullulan production from hydrolysates of various sources of renewable feedstocks (Jerusalem artichoke tubers, aspen wood, Chlorella vulgaris microalgal biomass, and potato pulp) under the action of the catalyst. It is established that A. pullulans cells immobilized in a polyvinyl alcohol (PVA) cryogel consume glucose 1.5 times faster and accumulate a 1.7 times higher concentration of the target polysaccharide in the medium than free cells. The immobilized cells can function for at least 15 operating cycles with a slight (no more than 10%) reduction in their metabolic activity. Analysis of the obtained data confirms that cell immobilization in a PVA gel for the production of pullulan allows us to shorten the duration of operating cycles in similar processes by a factor of 1.4 while reaching a comparable yield of the target product.