Viral dynamics of primary viremia and antiretroviral therapy in simian immunodeficiency virus infection

Mathematical modeling of viral replication dynamics, based on sequential measurements of levels of virion-associated RNA in plasma during antiretroviral treatment, has led to fundamental new insights into human immunodeficiency virus type 1 pathogenesis. We took advantage of the simian immunodeficiency virus (SIV)-infected macaque model to perform detailed measurements and mathematical modeling during primary infection and during treatment of established infection with the antiretroviral drug (R)-9-(2-phosphonylmethoxypropyl)adenine (PMPA). The calculated clearance half-life for productively infected cells during resolution of the peak viremia of primary infection was on the order of 1 day, with slightly shorter clearance half-lives calculated during PMPA treatment. Viral reproduction rates upon discontinuation of PMPA treatment after 2 weeks were approximately twofold greater than those obtained just prior to initiation of treatment in the same animals, likely reflecting accumulation of susceptible target cells during treatment. The basic reproductive ratio (R0) for the spread of SIV infection in vivo, which represents the number of productively infected cells derived from each productively infected cell at the beginning of infection, was also estimated. This parameter quantifies the extent to which antiviral therapy or vaccination must limit the initial spread of virus to prevent establishment of chronic disseminated infection. The results thus provide an important guide for efforts to develop vaccines against SIV and, by extension, human immunodeficiency virus.     

Scheduling DAG's for asynchronous multiprocessor execution

A new approach is given for scheduling a sequential instruction stream for execution “in parallel” on asynchronous multiprocessors. The key idea in our approach is to exploit the fine grained parallelism present in the instruction stream. In this context, schedules are constructed by a careful balancing of execution and communication costs at the level of individual instructions, and their data dependencies. Three methods are used to evaluate our approach. First, several existing methods are extended to the fine grained situation. Our approach is then compared to these methods using both static schedule length analyses, and simulated executions of the scheduled code. In each instance, our method is found to provide significantly shorter schedules. Second, by varying parameters such as the speed of the instruction set, and the speed/parallelism in the interconnection structure, simulation techniques are used to examine the effects of various architectural considerations on the executions of the schedules. These results show that our approach provides significant speedups in a wide-range of situations. Third, schedules produced by our approach are executed on a two-processor Data General shared memory multiprocessor system. These experiments show that there is a strong correlation between our simulation results, and these actual executions, and thereby serve to validate the simulation studies. Together, our results establish that fine grained parallelism can be exploited in a substantial manner when scheduling a sequential instruction stream for execution “in parallel” on asynchronous multiprocessors     

The effects of pressure on the isothermal fluid behavior of bituminous coals

An investigation into the effects of pressure (helium gas) on the isothermal fluid behavior includes: (1) the effect of pressure on the rate of melting and coking as evidenced by the rate constants k(melt) and k(coke); (2) the effect of pressure on the energies of activation of melting and coking; (3) the effects of pressure on the characteristic times; (4) the effects of pressure on the maximum isothermal fluidity. Results from the effects of pressure on k(melt) revealed that it was generally the high total sulfur, low nitrogen, low reactives/mineral matter ratio, medium rank coals which show the greatest increase in k(melt), whereas the highest rank coals show the least decrease in k(coke). The energies of activation of melting and coking were not significantly affected by pressure. The investigation also reveals increases or decreases in the respective times of softening, maximum fluidity, resolidification and total time of fluid behavior under isothermal pressurized conditions. There appears the possibility that these shifts may be rank dependent. Additionally, the lower rank coals show the largest relative increase in their fluidities when subjected to pressure. Empirical relationships were derived in order to quantitatively predict the maximum isothermal fluidity for most (fluid) coals at a given pressure.     

When danger lurks in the background: Attentional capture by animal fear-relevant distractors is specific and selectively enhanced by animal fear.

Across 2 experiments, a new experimental procedure was used to investigate attentional capture by animal fear-relevant stimuli. In Experiment 1 (N = 34), unselected participants were slower to detect a neutral target animal in the presence of a spider than a cockroach distractor and in the presence of a snake than a large lizard distractor. This result confirms that phylogenetically fear-relevant animals capture attention specifically and to a larger extent than do non-fear-relevant animals. In Experiment 2 (N = 86), detection of a neutral target animal was slowed more in the presence of a feared fear-relevant distractor (e.g., a snake for snake-fearful participants) than in presence of a not-feared fear-relevant distractor (e.g., a spider for snake-fearful participants). These results indicate preferential attentional capture that is specific to phylogenetically fear-relevant stimuli and is selectively enhanced in individuals who fear these animals. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Analytical pyrolysis as a tool for the study of plastic coals

The technique of analytical pyrolysis has been used to characterize 40 similar mid-rank western Kentucky coals of widely differing ASTM Gieseler plasticity. Certain pyrolysis/g.c. variables were shown to correlate well with both ASTM Gieseler and isothermal plasticity. Highly plastic coals were shown to exhibit certain characteristic peaks in the 450 °C pyrogram which were absent in the pyrogram of the non-plastic coals. Two coals, representing the two extremes in plasticity, were selected for further study. After extraction with solvents such as DMF the characteristic peaks were absent in the 450 °C pyrogram of the extraction residue of the highly plastic coal. These peaks were also shown to decrease with increasing severity of air oxidation of the plastic coal. This technique appears to be a useful tool for the analysis of mid-rank plastic coals and supports the view that the substances contained in the bitumen fraction of these coals are involved in the development of the plastic state.     

Learning Organizations in Construction

The transformation of organizations from production-oriented entities to proactive learning entities that continuously leverage the knowledge of the workforce is a primary objective of management researchers. This focus has significant relevance to the construction industry where production-related research has predominantly overshadowed organizational development research. As one effort to change this emphasis, the writers present a research effort designed to study current organization learning techniques and technologies fielded by organizations both inside and outside of the construction industry. Through a series of exploratory case studies, the writers developed a maturity model together with the Construction Industry Institute that provides construction organizations with a framework for developing a learning organization culture. The maturity model focuses on learning organization characteristics of leadership, processes and infrastructure, communication/collaboration, education, and culture at the organization, community, and individual levels. This paper introduces the results of that effort including a presentation of the learning organization maturity model, framework application, and the overall characteristics of a learning organization.     

Positive psychology principles applied to consulting psychology at the individual and group level.

This article describes the application, at the team and individual level, of findings from the positive psychology research. An overview of this research is presented focusing on several areas generally included in the positive psychology domain: flow, appreciative inquiry, the broaden and build theory, and other strategies for increasing the experience of positive emotions and the identification and deployment of strengths. The authors propose that these applications show promise in consulting psychology engagements and may have merit when utilized by practitioners themselves. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Interrupted ultrasonic bolt load measurements using the pulsedphase-locked loop system

A method of reacquiring a previous phase lock-point using the pulsed phase-locked loop (PPLL) ultrasonic system in situations where the measurement is interrupted such as by removing and recoupling the transducer is developed. Operation of the PPLL is mathematically analyzed in the time domain rather than in the conventional frequency domain, providing a method of characterizing multiple lock-points. The general lock-point reacquisition method that follows from the model relies on measurement over a frequency range that spans several lock-points and is demonstrated to work well for interrupted measurements on threaded fasteners. The method is analyzed for sensitivity to signal noise, and an equation is derived, expressing the number of lock-points over which to measure for successful lock-point reacquisition as a function of signal noise level. Experimental verification on a glass block shows that theoretical values obtained with this model are in good agreement with measurements. Automation of the method presented has been demonstrated, showing that it offers a practical, objective approach to making interrupted load measurements, thereby greatly widening the range of applications of the PPLL     

Randomized trial of breast self-examination in Shanghai: methodology and preliminary results

BACKGROUND: The efficacy of breast self-examination in helping to reduce mortality from breast cancer has not been rigorously demonstrated. PURPOSE: To assess efficacy, a large, randomized trial was initiated in Shanghai, China. METHODS: From October 1989 to October 1991, 267040 current and retired female employees associated with 520 factories in the Shanghai Textile Industry Bureau were randomly assigned on the basis of factory to either a self-examination instruction group (133375 women) or a control group (133665 women). The women were born within the period from 1925 through 1958. Women in the instruction group were given intensive training in breast self-examination, including the use of silicone breast models and personalized instruction, plus two subsequent reinforcement sessions and multiple reminders to practice the technique. Women in the control group were asked to attend training sessions on the prevention of low back pain. All women have been followed for the development of breast diseases and for death from breast cancer. RESULTS: A high level of participation during the first 4-5 years of the trial was documented among women in the instruction group. Randomly sampled women in this group demonstrated greater proficiency in detecting lumps in breast models than did randomly sampled women in the control group. Approximately equal numbers of breast cancers were detected in the two groups (331 in the instruction group and 322 in the control group) through 1994, which is the last year for which case-finding efforts have been completed. The breast cancers detected in the instruction group were not diagnosed at an appreciably earlier stage or smaller size than those in the control group. More benign breast lesions were detected in the instruction group than in the control group (1457 versus 623, respectively), suggesting a higher index of suspicion for women who received training. Cumulative breast cancer mortality rates through 5 years from entry into the study were nearly equivalent for the two groups. CONCLUSIONS: Breast self-examination has not led to a reduction in mortality from breast cancer in this study cohort in the first several years since the trial began. A shift toward the diagnosis of disease at a less advanced stage in women given instruction has also not been demonstrated. Longer follow-up of participants in this trial is required before final assessment can be made of the efficacy of breast self-examination. IMPLICATIONS: At this time, there is insufficient evidence to recommend for or against the teaching of breast self-examination.