Quand les objets deviennent communicants La mise en confiance des acteurs humains et la question des traces numériques

The “Internet of things” is likely to give a second breath to the information society. However, the loss of control over personal information is both problematical and widely criticized. The “promise” of a better society offered by new services based on communication between machines carries with it frightening corollaries: it evokes a totalitarian space, where anonymous exchanges are no longer possible and the various traits of people’s digital identities are stored by agents of public and business powers. It is thus the management of digital tracking technologies that we wish to explore in this publication. Our hypothesis is that current criticism of a police state or of new forms of economic alienation is taking place at far too general a level. It obscures the real problem with the profusion of tracking methods, which for us reveals a crisis of confidence (as Giddens means it), at the individual level, in the means of production of telecommunications, which is the result of a deficit in the standardization process. From this perspective, the issue of the profusion of tracing technologies and their management transcends the issue of social control to encompass that of social responsibility and of modalities of proofs when the system fails.     

The effect of photo-oxidation on thermal and fire retardancy of polypropylene nanocomposites

Nanocomposites of polypropylene-graft-maleic anhydride/clay were prepared by melt blending in an extruder mixer. The nanoscale dispersion of the clay in the polymer was analysed by wide-angle X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results of XRD and TEM showed that the nanocomposites obtained were a kind of intercalated-delaminated structures side by side with different dominant states, depending on the clay used and on the processing conditions. The consequences of photo-oxidation on the thermal stability and fire retardant properties of the nanocomposites were investigated using thermogravimetric analysis and cone calorimetry tests. It appeared that this degradation dramatically affected the important properties of the nanocomposites. A loss of thermal stability and fire retardant performance was observed. This was ascribed to scission reactions that occurred during the oxidative degradation prior to thermal and fire tests.     

Effect of binder on performance of intumescent coatings

This study investigates the role of the polymeric binder on the properties and performance of an intumescent coating. Waterborne resins of different types (vinylic, acrylic, and styrene-acrylic) were incorporated in an intumescent paint formulation, and characterized extensively in terms of thermal degradation behavior, intumescence thickness, and thermal insulation. Thermal microscopy images of charred foam development provided further information on the particular performance of each type of coating upon heating. The best foam expansion and heat protection results were obtained with the vinyl binders. Rheological measurements showed a complex evolution of the viscoelastic characteristics of the materials with temperature. As an example, the vinyl binders unexpectedly hardened significantly after thermal degradation. The values of storage moduli obtained at the onset of foam blowing (melamine decomposition) were used to explain different intumescence expansion behaviors.     

Cokriging-Based Sequential Design Strategies Using Fast Cross-Validation Techniques for Multi-Fidelity Computer Codes

Cokriging-based surrogate models have become popular in recent decades to approximate a computer code output from a few simulations using both coarse and more complex versions of the code. In practical applications, it is common to sequentially add new simulations to obtain more accurate approximations. We propose a method of cokriging-based sequential design, which combines both the error evaluation provided by the cokriging model and the observed errors of a leave-one-out cross-validation procedure. This method is proposed in two versions, the first one selects points one at a time. The second one allows us to parallelize the simulations and to add several design points at a time. The main advantage of the suggested strategies is that at a new design point they choose which code versions should be simulated (i.e., the complex code or one of its fast approximations). A multifidelity application is used to illustrate the efficiency of the proposed approaches. In this example, the accurate code is a two-dimensional finite element model and the less accurate one is a one-dimensional approximation of the system. This article has supplementary material online.     

Capillary self-alignment of polygonal chips: a generalization for the shift-restoring force

Capillary-driven self-alignment using droplets is currently extensively investigated for self-assembly and microassembly technology. In this technique, surface tension forces associated to capillary pinning create restoring forces and torques that tend to bring the moving part into the alignment. So far, most studies have addressed the problem of square chip alignment on a dedicated patch of a wafer, aiming to achieve 3D microelectronics. In this study, we investigate the shift-restoring forces for more complex moving parts such as regular—convex and non-convex—polygons and regular polygons with regular polygonal cavities. A closed-form approximate expression is derived for each of these polygonal geometries; this expression agrees with the numerical results obtained with the Surface Evolver software. For small shifts, it is found that the restoring force does not depend on the shift direction or on the polygonal shape. In order to tackle the problem of microsystem packaging, an extension of the theory is done for polygonal shapes pierced with connection vias (channels), and a closed form of the shift-restoring force is derived for these geometries and again checked against the numerical model. In this case, the restoring force depends on the shift direction. Finally, a non-dimensional number, the shift number, is proposed that indicates the isotropic or anisotropic behavior of the chip according to the shift direction.     

Slip Length Measurements Using µPIV and TIRF-Based Velocimetry

The goal of this paper is to review progress (mostly recent) made in micro and nanovelocimetry, focusing on two techniques: µPIV (microparticle image velocimetry) and nanoPTV (nanoparticle tracking velocimetry). The paper focuses on the measurement of slippage (taken as a benchmark for these techniques), concentrating on work done in our group. We review the developments of µPIV that led, in the last ten years, to the achievement of 100 nm accuracy in the measurement of slip lengths. Later, this approach was complemented by nanoPTV, which recently obtained ±5 nm precision. Here, we also mention recent application of these techniques toward better characterization of microgel and polymer flows. As a whole, the two techniques have conveyed valuable information on flow behavior within and close to the boundaries of microchannels, on the importance of wetting, and on the role of surface heterogeneities. µPIV is commercially available but nanoPTV is not mature. Interesting instrumental developments are expected in the future for the latter technique.     

Whodunnit – Searching for the most important feature types signalling emotion-related user states in speech

In this article, we describe and interpret a set of acoustic and linguistic features that characterise emotional/emotion-related user states – confined to the one database processed: four classes in a German corpus of children interacting with a pet robot. To this end, we collected a very large feature vector consisting of more than 4000 features extracted at different sites. We performed extensive feature selection (Sequential Forward Floating Search) for seven acoustic and four linguistic types of features, ending up in a small number of ‘most important’ features which we try to interpret by discussing the impact of different feature and extraction types. We establish different measures of impact and discuss the mutual influence of acoustics and linguistics.     

基于Livermore模型CT图片构建人体躯干数字体模及其在肺部计数器虚拟刻度中的应用

基于Livermore 人体躯干物理模型CT图片构建数字体模,并结合蒙特卡罗程序MCNP对一套由四个宽能高纯锗探测器(BEGe)构成的肺部计数器进行了虚拟刻度.首先,利用点源(241Am,137Cs,60Co,54Mn,57Co,109Cd) 实验数据,对高纯锗晶体尺寸进行调整以获得正确的探测器几何参数,在γ射线能量13.9 keV～1332.5 keV范围内,调整后四个探测器全能峰效率实验测量的平均值与蒙特卡罗计算值的差别在±10%范围内.之后,对不同胸壁厚度(CWT=19 mm, 25 mm, 30 mm, 43 mm)躯干体模进行CT扫描获得其CT图片,利用Dosigray软件对CT图片进行分割后,连同探测器几何描述文件输入到OEDIPE软件,生成数字体模虚拟刻度用MCNP输入程序.最后,利用241Am、152Eu肺部源对数字体模虚拟刻度结果进行了实验验证,结果表明:在59.5 keV～1408 keV能量范围内,虚拟刻度结果与实验结果的差别在±10%之间;对于17.5 keV能量,差别在±30%之间.     

Al0.3Ga0.7As-GaAs microwave resonant tunneling oscillator

We describe the design of a microwave oscillator using resonant tunneling diodes. The devices are fabricated from Al_0.3Ga_0.7As-GaAs double barrier hetero-structures grown by molecular beam epitaxy. Design criteria improving current drivability are established from a theoretical study of tunneling transmission probabilities. Very high peak current densities up to 3.10⁴ A/cm², favorable for high frequency operation as an oscillator, have been achieved experimentally. The devices exhibit stable oscillations at liquid nitrogen temperature and at room temperature when the tunnel diode oscillator is constructed with a stabilizing network.     

Towards a better assessment of the ecological status of coastal waters using satellite-derived chlorophyll-a concentrations

The application of the new Water Framework Directive (WFD) of the European Union will require a dense and frequent monitoring of chlorophyll-a near the coast. Not counting the transitional water bodies located in the vicinity of estuaries, not less than seventy four coastal water bodies have to be monitored along the coast of the French Atlantic continental shelf and the English Channel. All the available data have to be gathered to implement a comprehensive monitoring scheme. To this purpose, we evaluate the capacity of ocean colour imagery to complete the conventional in situ data set collected in coastal networks. Satellite-derived chlorophyll-a concentration is obtained by the application of a coastal Look-Up-Table to water-leaving radiance of the Sea-viewing Wide Field Instrument Sensor (SeaWiFS) for the 1998–2004 period. Seven years of satellite-derived and in situ chlorophyll-a concentrations are compared at seven representative stations of different water bodies. These comparisons show that the satellite products are reliable in most of the situations studied and throughout the seasons. Then the satellite imagery is used to classify the coastal waters following the eutrophication risk criterion of the WFD. This classification is made according to the percentile-90 of chlorophyll-a calculated during the productive season, from March to October. Despite a lack of sensor coverage over a small fraction of the near shore waters, this work shows that the satellite monitoring can considerably ease the application of the WFD.