Growth of highly orientated strontium barium niobate thin films on Si substrates through the sol–gel process using a K: SBN template layer

We report the growth of highly C-axis orientation of Sr _x Ba_1−x Nb₂O₆ (SBN) thin films on p-type (100) Si substrates by using a potassium-substituted SBN template layer with the sol–gel method. The crystallization of SBN thin films was found closely related to the potassium ion doping concentration and the postannealing temperature of the K-SBN template layer. Secondary ion mass spectrometry analysis showed that potassium elements were accumulated at the interface of the template layer and silicon substrate. SBN films postannealed at 750 °C with K-SBN template layer has a smaller full width at half maximum of X-ray rocking curve of 2.45° than that of 5.40° for the pure SBN films. By introducing a template layer, the surface morphologies of SBN films fabricated on silicon substrate were greatly improved.     

Essential contribution of caspase 3/CPP32 to apoptosis and its associated nuclear changes

Caspases are fundamental components of the mammalian apoptotic machinery, but the precise contribution of individual caspases is controversial. CPP32 (caspase 3) is a prototypical caspase that becomes activated during apoptosis. In this study, we took a comprehensive approach to examining the role of CPP32 in apoptosis using mice, embryonic stem (ES) cells, and mouse embryonic fibroblasts (MEFs) deficient for CPP32. CPP32(ex3-/-) mice have reduced viability and, consistent with an earlier report, display defective neuronal apoptosis and neurological defects. Inactivation of CPP32 dramatically reduces apoptosis in diverse settings, including activation-induced cell death (AICD) of peripheral T cells, as well as chemotherapy-induced apoptosis of oncogenically transformed CPP32(-/-) MEFs. As well, the requirement for CPP32 can be remarkably stimulus-dependent: In ES cells, CPP32 is necessary for efficient apoptosis following UV- but not gamma-irradiation. Conversely, the same stimulus can show a tissue-specific dependence on CPP32: Hence, TNFalpha treatment induces normal levels of apoptosis in CPP32 deficient thymocytes, but defective apoptosis in oncogenically transformed MEFs. Finally, in some settings, CPP32 is required for certain apoptotic events but not others: Select CPP32(ex3-/-) cell types undergoing cell death are incapable of chromatin condensation and DNA degradation, but display other hallmarks of apoptosis. Together, these results indicate that CPP32 is an essential component in apoptotic events that is remarkably system- and stimulus-dependent. Consequently, drugs that inhibit CPP32 may preferentially disrupt specific forms of cell death.     

Change of foot size with weightbearing. A study of 2829 children 3 to 18 years of age

The change of foot length and width with age has been reported in a few anthropometric studies in the literature. However, the relationship with body height rarely is reported, and the dynamic effect of weightbearing on foot size has not been documented. In this series, 2829 children 3 to 18 years of age of equal gender distribution were included in the study. The foot length and width on weightbearing and nonweightbearing were measured with a special precision electronic caliper. The foot length and width were found to increase linearly from the age of 3 years until 12 years in girls and 15 years in boys. This was followed by a phase during which the increase plateaued. The foot length and width increased significantly on weightbearing at all ages in both genders with a mean of 2.1 to 4.4 mm or 3.1% to 4.8%, respectively. The foot length and width also were found to correlate significantly with the body height in both genders, with a correlation coefficient of 0.96 to 0.98. No significant differences were found between the sizes of the dominant and nondominant foot in either gender.     

Two-step channel selection-a novel technique for reconfigurable multistandard transceiver front-ends

This paper starts with a review of the prevailing channel-selection techniques utilized so far in the design of wireless transceiver analog front-ends before describing a novel two-step channel-selection technique, which handles the traditionally unwanted image, in radio frequency-to-intermediate frequency (RF-to-IF) or IF-to-RF frequency conversion, as a useful adjacent channel of the desired one, and selects deliberately either of them from IF to baseband (or baseband to IF). Thus, one more channel-selection possibility is created for both low-IF receivers and two-step-up transmitters. The consequential benefits of introducing channel selection at IF consist of two. First, many design specifications (such as phase noise and settling time) of the RF frequency synthesizer and local oscillator can be substantially relaxed. Second, a low-IF/zero-IF reconfigurable receiver and a direct-up/two-step-up reconfigurable transmitter can be synthesized to match better with narrowband-wideband-mixed multistandard systems. The operating principles of such architectures are presented in easy-to-understand complex-signal spectral-flow illustrations, and their practicability is demonstrated in the design of a Bluetooth/IEEE 802.11FH/HomeRF multistandard receiver. SPECTRE simulation results validate the reconfigurable functionalities mainly implemented by a triple-mode channel-select filter and a multifunctional sampling-mixer scheme.     

Maximum Penalized Likelihood Kernel Regression for Fast Adaptation

This paper proposes a nonlinear generalization of the popular maximum-likelihood linear regression (MLLR) adaptation algorithm using kernel methods. The proposed method, called maximum penalized likelihood kernel regression adaptation (MPLKR), applies kernel regression with appropriate regularization to determine the affine model transform in a kernel-induced high-dimensional feature space. Although this is not the first attempt of applying kernel methods to conventional linear adaptation algorithms, unlike most of other kernelized adaptation methods such as kernel eigenvoice or kernel eigen-MLLR, MPLKR has the advantage that it is a convex optimization and its solution is always guaranteed to be globally optimal. In fact, the adapted Gaussian means can be obtained analytically by simply solving a system of linear equations. From the Bayesian perspective, MPLKR can also be considered as the kernel version of maximum a posteriori linear regression (MAPLR) adaptation. Supervised and unsupervised speaker adaptation using MPLKR were evaluated on the Resource Management and Wall Street Journal 5K tasks, respectively, achieving a word error rate reduction of 23.6% and 15.5% respectively over the speaker-independently model.     

A novel polymer microneedle fabrication process for active fluidic delivery

In this article, we explore a new fabrication process for a flexible, all polymer, active fluidic delivery system, incorporating a fusion of laser micromachining and microfabrication techniques as well as rapid prototyping technology. Here, we show selective fluidic delivery from isolated microchannels through an electrochemically driven pumping reaction, demonstrate the dispensing of dose volumes up to 5.5 μl, and evaluate the device’s performance in terms of its delivery speed and ejection efficiency. Finally, we move this work toward an implantable microfluidic drug delivery device by investigating the device’s biocompatibility through a statistical approach that overviews the viability of bovine aortic endothelial cells on polyimide and silicon substrates.     

In-vitro study of medial strain distribution in the femur during impaction grafting

Impaction bone grafting (IBG) is widely used for revision hip surgery to compensate for bone stock loss. It is performed by impacting morsellized allograft into the femoral canal and acetabulum prior to cementing new total hip components. Per- and post-operative femoral fractures and post-operative implant subsidence are major complications in IBG. The aim of this study was to investigate the strain distribution on the medial side of the femur during impaction grafting and the subsequent stability of the stem under uniaxial cyclic loading. The Exeter IBG technique was used in conjunction with Howmedica X-change instrumentation. Sawbones composite femora were used. An impactometer, which provides a known impaction energy and momentum, was used to standardize the impaction process. Three drop heights, 130, 260, and 390 mm, were used for proximal impaction. In-vitro medial hoop strains and the number of impacts were recorded. A drop height of 260 mm was found to provide sufficient energy for impaction without introducing excessive strains to achieve implant stability. Furthermore, a feasibility study was performed on the use of a proximal impaction cap (PIC) to restrain extrusion of the graft during impaction. Although no significant difference in impaction strains or stem stability in uniaxial cylic loading was found by using a PIC, it is postulated that the design of a proximal impactor could be improved to assist with proximal stem alignment and graft containment.     

Development of a web-based system for engineering change management

Engineering changes (ECs) are changes and/or modifications in forms, fits, functions, materials, dimensions, etc., of products and constituent components. ECs usually induce a series of downstream changes. Multiple disciplines and responsibilities are therefore involved in managing ECs. Previous investigations conducted by the authors and other researchers have shown that paper-based and standalone computerised EC management (ECM) systems have limited support for such intensive teamwork and close communication. This paper proposes to establish a web-based framework that supports ECM procedures and activities. A web-based ECM system is able to provide better information sharing, simultaneous data access and processing and more prompt communication and feedback. The amount of paperwork and the throughput time of managing ECs are significantly reduced while the effectiveness and the efficiency are substantially improved. This paper focuses on discussing the issues of design, development, and implementation of this prototype web-based ECM system.