Simulation of Natural Depletion and Miscible Gas Injection Effects on Asphaltene Stability in Petroleum Reservoir Fluids

Natural depletion of petroleum reservoirs as well as gas injection for enhance oil recovery, are unavoidable processes in the oil industry. Foremost, prediction of the problems due to these two processes is very necessary and important. So many field and experimental experiences have shown that heavy organic depositions, especially asphaltene deposition, are principal results during these processes. Results of laboratory simulation of asphaltene deposition during the natural depletion of petroleum reservoirs and also during gas injection and enhanced oil recovery (EOR) processes are reported here. This is achieved through the design of a new experimental setup for the investigation of pressure and composition effects on asphaltene deposition in petroleum fluids at high pressure and high temperature conditions. In this work, asphaltene deposition during decreasing pressure, from pressures greater than reservoir pressure to pressures below the bubble point pressure (natural depletion) and also asphaltene deposition during natural gas injection in reservoir conditions, are studied for three samples—one recombined sample and two bottomhole samples. All of the obtained results from this work conform to theoretical and other experimental works.     

Sustainable Basin-Scale Water Allocation with Hydrologic State-Dependent Multi-Reservoir Operation Rules

This study extends the PSO-MODSIM model, integrating particle swarm optimization (PSO) algorithm and MODISM river basin decision support system (DSS) to determine optimal basin-scale water allocation, in two aspects. The first is deriving hydrologic state-dependent (conditional) operating rules to better account for drought and high-flow periods, and the second is direct, explicit consideration of sustainability criteria in the model’s formulation to have a better efficiency in basin-scale water allocation. Under conditional operating rules, the operational parameters of reservoir target storage levels and their priority rankings were conditioned on the hydrologic state of the system in a priority-based water allocation scheme. The role of conditional operating rules and policies were evaluated by comparing water shortages associated with objective function values under unconditional and conditional operating rules. Optimal basin-scale water allocation was then evaluated by incorporating reliability, vulnerability, reversibility and equity sustainability indices into the PSO objective function. The extended model was applied for water allocation in the Atrak River Basin, Iran. Results indicated improved distribution of water shortages by about 7.5% using conditional operating rules distinguishing dry, normal and wet hydrologic states. Alternative solutions with nearly identical objective function values were found with sustainability indices included in the model.     

Performance Assessment of a Coupled Particle Swarm Optimization and Network Flow Programming Model for Optimum Water Allocation

Water resources allocation problems are mainly categorized in two classes of simulation and optimization. In most cases, optimization problems due to the number of variables, constraints and nonlinear feasible search space are known as a challenging subject in the literature. In this research, by coupling particle swarm optimization (PSO) algorithm and a network flow programming (NFP) based river basin simulation model, a PSO-NFP hybrid structure is constructed for optimum water allocation planning. In the PSO-NFP model, the NFP core roles as the fast inner simulation engine for finding optimum values for a large number of water discharges in the network links (rivers and canals) and nodes (reservoirs and demands) while the heuristic PSO algorithm forms the outer optimization cover to search for the optimum values of reservoirs capacities and their storage priorities. In order to assess the performance of the PSO-NFP model, three hypothetical test problems are defined, and their equivalent nonlinear mathematical programs are developed in LINGO and the results are compared. Finally, the PSO-NFP model is applied in solving a real river basin water allocation problem. Results indicate that the applied method of coupling PSO and NFP has an efficient ability for handling river basin-scale water resources optimization problems.     

A robust optimization approach for pollution routing problem with pickup and delivery under uncertainty

Organizations have recently become interested in applying new approaches to reduce fuel consumptions, aiming at decreasing green house gases emission due to their harmful effects on environment and human health; however, the large difference between practical and theoretical experiments grows the concern about significant changes in the transportation environment, including fuel consumptions, carbon dioxide (CO₂) emissions cost and vehicles velocity, that it encourages researchers to design a near-reality and robust pollution routing problem. This paper addresses a new time window pickup-delivery pollution routing problem (TWPDPRP) to deal with uncertain input data for the first time in the literature. For this purpose, a new mixed integer linear programming (MILP) approach is presented under uncertainty by taking green house emissions into consideration. The objective of the model is to minimize not only the travel distance and number of available vehicles along with the capacity and aggregated route duration restrictions but also the amount of fuel consumptions and green house emissions along with their total costs. Moreover, a robust counterpart of the MILP is introduced by applying the recent robust optimization theory. Computational results for several test problems indicate the capability and suitability of the presented MILP model in saving costs and reducing green house gases concurrently for the TWPDPRP problem. Finally, both deterministic and robust mathematical programming are compared and contrasted by a number of nominal and realizations under these test problems to judge the robustness of the solution achieved by the presented robust optimization model.     

A new image encryption scheme with Feistel like structure using chaotic S-box and Rubik cube based P-box

Multimedia Tools and Applications - In this paper, a novel chaos-based dynamic encryption scheme with a permutation-substitution structure is presented. The S-boxes and P-boxes of the scheme are...     

Soft computing based on new interval-valued fuzzy modified multi-criteria decision-making method

In this paper, a new interval-valued fuzzy modified TOPSIS (IVFM-TOPSIS) method is proposed that can reflect both subjective judgment and objective information in real life situations. This proposed method is based on concepts of the positive ideal and negative ideal solutions for solving multi-criteria decision-making (MCDM) problems in a fuzzy environment. The performance rating values and weights of criteria are linguistic variables expressed as triangular interval-valued fuzzy numbers. Furthermore, we appraise the performance of alternatives against both subjective and objective criteria with multi-judges for decision-making problems. Finally, for the purpose of proving the validity of the proposed method a numerical example is presented for a robot selection problem.     

Plasma Enhanced Lithium Coupled with Cobalt Fibers Arrays for Advanced Energy Storage

Construction of high efficiency and stable Li metal anodes is extremely vital to the breakthrough of Li metal batteries. In this study, for the first time, groundbreaking in situ plasma interphase engineering is reported to construct high-quality lithium halides-dominated solid electrolyte interphase layer on Li metal to stabilize & protect the anode. Typically, SF₆ plasma-induced sulfured and fluorinated interphase (SFI) is composed of LiF and Li₂S, interwoven with each other to form a consecutive solid electrolyte interphase. Simultaneously, brand-new vertical Co fibers (diameter: ≈5 µm) scaffold is designed via a facile magnetic-field-assisted hydrothermal method to collaborate with plasma-enhanced Li metal anodes (SFI@Li/Co). The Co fibers scaffold accommodates active Li with mechanical integrity and decreases local current density with good lithiophilicity and low geometric tortuosity, supported by DFT calculations and COMSOL Multiphysics simulation. Consequently, the assembled symmetric cells with SFI@Li/Co anodes exhibit superior stability over 525 h with a small voltage hysteresis (125 mV at 5 mA cm⁻²) and improved Coulombic efficiency (99.7%), much better than the counterparts. Enhanced electrochemical performance is also demonstrated in full cells with commercial cathodes and SFI@Li/Co anode. The research offers a new route to develop advanced alkali metal anodes for energy storage.     

Group decision making process for supplier selection with VIKOR under fuzzy environment

During recent years, how to determine suitable suppliers in the supply chain has become a key strategic consideration. However, the nature of supplier selection is a complex multi-criteria problem including both quantitative and qualitative factors which may be in conflict and may also be uncertain. The VIKOR method was developed to solve multiple criteria decision making (MCDM) problems with conflicting and non-commensurable (different units) criteria, assuming that compromising is acceptable for conflict resolution, the decision maker wants a solution that is the closest to the ideal, and the alternatives are evaluated according to all established criteria. In this paper, linguistic values are used to assess the ratings and weights for these factors. These linguistic ratings can be expressed in trapezoidal or triangular fuzzy numbers. Then, a hierarchy MCDM model based on fuzzy sets theory and VIKOR method is proposed to deal with the supplier selection problems in the supply chain system. A numerical example is proposed to illustrate an application of the proposed model.     

Welding current and arc voltage control in a GMAW process using ARMarkov based MPC

A predictive functional controller based on ARMarkov model structure has been designed to control welding current and arc voltage in a GMAW process. The closed loop system performance is investigated through computer simulations and is compared by those achieved from implementing two commonly used controllers i.e. PI and feedback linearization based PID. The local stability of the closed loop system is analyzed in the presence of uncertainties in the linearized model of the process as well as the control parameters. Finally it is shown that the proposed controller performs like a PI controller along with a pre-filter compensator.