The Emi2 Protein of Saccharomyces cerevisiae is a Hexokinase Expressed under Glucose Limitation

Hexokinases catalyze glucose phosphorylation at the first step in glycolysis in eukaryotes. In the budding yeast Saccharomyces cerevisiae , three enzymes for glucose phosphorylation have long been known: Hxk1, Hxk2, and Glk1. In this study, we focus on Emi2, a previously uncharacterized hexokinase-like protein of S. cerevisiae . Our data show that the recombinant Emi2 protein (rEmi2), expressed in Escherichia coli , possesses glucose-phosphorylating activity in the presence of ATP and Mg ²⁺ . It was also found that rEmi2 phosphorylates not only glucose but also fructose, mannose and glucosamine in vitro . In addition, we examined changes in the level of endogenous Emi2 protein in S. cerevisiae in the presence or absence of glucose and a non-fermentable carbon source. We found that the expression of Emi2 protein is tightly suppressed during proliferation in high glucose, while it is strongly upregulated in response to glucose limitation and the presence of a non-fermentable carbon source. Our data suggest that the expression of the endogenous Emi2 protein in S. cerevisiae is regulated under the control of Hxk2 in response to glucose availability in the environment.     

Oxidation of doped europium in BaMgAl10O17 by annealing studied by x‐ray‐absorption fine‐structure measurements

Abstract— We studied the influence of annealing in air on doped europium in BaMgAl₁₀O₁₇ by performing x‐ray absorption fine‐structure measurements. We determined the oxidation of doped divalent europium by annealing in air at over 500°C. The interatomic distance between the europium and the surrounding oxygen atoms was compressed by oxidation. It also appears that the oxidation process of europium is determined by the diffusion of oxygen into BaMgAl₁₀O₁₇.     

Expert system for dispatch control in restoration of ehv power system after complete blackout

Present-day power systems operate with high reliability, and it is rare that a blackout will extend over an entire system swiftly and securely. This paper considers automatic power supply to loads after a complete blackout of a system. First, taking into account characteristics of generators, loads, and initial power sources, a method is proposed of allocating several generators to each load in parallel to the system and supplying power to the load sequentially. Second, to remove the imbalance between supply and demand of power, a method is proposed of adjusting the amount of supply and generation according to a present imbalance and the sum of past ones. Third, to automatically issue orders for start-up, parallel, follow-up, stand-by, and stoppage of generators, several rules for each power station are set and an expert system is made based on them. Finally, the expert system is applied to a model power system, and it is verified that it can restore loads without any trouble for a complete blackout which occur at any time of a day and in any restoration pattern.     

SOME PROPERTIES OF THE MAXIMUM LIKELIHOOD ESTIMATOR IN THE SIMULTANEOUS SWITCHING AUTOREGRESSIVE MODEL

Abstract. The simultaneous switching autoregressive (SSAR) model proposed by Kunitomo and Sato (A non-linearity in economic time series and disequilibrium econometric models. In Theory and Application of Mathematical Statistics (ed. A. Takemura). Tokyo:University of Tokyo Press (in Japanese), 1994; Asymmetry in economic time series and simultaneous switching autoregressive model. Struct. Change Econ. Dyn. , forthcoming (1994).) is a Markovian non-linear time series model. We investigate the finite sample as well as the asymptotic properties of the least squares estimator and the maximum likelihood (ML) estimator. Due to a specific simultaneity involved in the SSAR model, the least squares estimator is badly biased. However, the ML estimator under the assumption of Gaussian disturbances gives reasonable estimates.     

Fate of the chlorine and fluorine in a sub-bituminous coal during pyrolysis and gasification

The fate of the chlorine and fluorine present in a sub-bituminous coal from Indonesia during pyrolysis and gasification has been studied with fixed and entrained bed reactors. The rate profile for HCl evolved in the temperature programmed pyrolysis exhibits the main and shoulder peaks at 480 and 600 °C, respectively. Model experiments and subsequent Cl 2p XPS measurements show that HCl reacts with metal impurities and carbon active sites at 500 °C to be retained as inorganic and organic chlorine forms, from which HCl evolves again at elevated temperatures. It is suggested that the HCl observed in the coal pyrolysis may originate from the above-mentioned chlorine functionalities formed by secondary reactions involving the nascent char. In the CO₂ gasification of the 900 °C char at 1000 °C and 2.5 MPa, any measurable amounts of HCl and HF could not be detected even at a high conversion of 75 wt% (daf), suggesting the accumulation of these halogens in the residual char. When the coal is injected into an O₂-blown, entrained bed gasifier at 1200-1400 °C under 2.6 MPa, the partial oxidation proceeds to a larger extent at a higher O₂/coal ratio, whereas the chlorine and fluorine are enriched in the remaining char, and the extent of the enrichment at the latter stage of gasification is larger with the fluorine. The XPS measurements of the chars reveal the presence of the broad F 1 s peak, which can cover a wide range of binding energies attributable to inorganic and organic fluorine. The halogen enrichment during gasification is discussed in terms of secondary reactions of HCl and HF with char.     

New type of tin support for hydroprocessing catalyst

TiN supported molybdenum sulfide catalysts showed much higher activity for cleavage of C-C bonds than oxide supported molybdenum sulfide catalysts, indicating the possibility of a new generation of supports for hydroprocessing catalysts.     

Resistance to sulfur poisoning of hot gas cleaning catalysts for the removal of tar from the pyrolysis of cedar wood

In the partial oxidation of tar derived from the pyrolysis of cedar wood, the effect of H₂S addition was investigated over non-catalyst, steam reforming Ni catalyst, and Rh/CeO₂/SiO₂ using a fluidized bed reactor. In the non-catalytic gasification, the product distribution was not influenced by the presence of H₂S. Steam reforming Ni catalyst was effective for the tar removal without H₂S addition, however, the addition of H₂S deactivated drastically. In contrast, Rh/CeO₂/SiO₂ exhibited higher and more stable activity than the Ni catalyst even under the presence of high concentration of H₂S (280 ppm). On the Ni catalyst, the adsorption of sulfur was observed by XPS and Ni species was oxidized during the partial oxidation of tar. In the case of Rh/CeO₂/SiO₂, the adsorption of sulfur was below the detection limit of XPS. This can be related to the self-cleaning of catalyst surface during the circulation in the fluidized bed reactor for the partial oxidation of tar derived from cedar pyrolysis.     

Texture and Formation Mechanism of Fibrous Calcium Hydroxyapatite Particles Prepared by Decomposition of Calcium–EDTA Chelates

The texture of fibrous calcium hydroxyapatite (Ca₁₀-(PO₄)₆(OH)₂, CaHAP) particles that were prepared by the decomposition of calcium–ethylenediaminetetraacetic acid (calcium–EDTA) chelates at 100°C under various pH conditions (pH values of 5–10) was investigated by various means. Well-crystallized fibrous CaHAPs were produced at pH .6. The stoichiometry of the CaHAPs with a chemical formula of Ca_{10− x} (HPO₄) _x (PO₄)_{6− x} (OH)_{2− x} (H₂O) _x was improved by increasing the decomposition pH. All the CaHAPs had unit-cell dimensions of a = 0.9436 ± 0.0003 nm and c = 0.6881 ± 0.0006 nm, exhibiting an enlarged a value. The finding of mesoporosity of CaHAPs by nitrogen gas (N₂) adsorption measurement indicated that the CaHAPs were produced by an agglomeration of primary particles. Furthermore, the nonstoichiometric CaHAPs that formed at pH 6 developed ultramicropores, which were accessible to water (H₂O) molecules but not to N₂ molecules, by the elimination of H₂O molecules that were adsorbed in interstices of primary particles in less-orderly crystallized CaHAPs and/or by dehydration of HPO₄²⁻ groups. These findings by gas adsorption techniques could give evidence for the agglomeration mechanism to attain a polycrystalline CaHAP, although they exhibited good crystallinity with large size.     

Residues important for the function of a multihelical DNA binding domain in the new transcription factor family of Cam and Tet repressors

We report that some prokaryotic repressors including CamR andTetR belong to the same family. CamR and TetR bind to DNA usinga multihelical DNA binding domain (DBD) at the N-termini ofthe proteins, while the C-termini are important for regulatingthe DNA binding in a manner dependent on their co-factors (camphorfor CamR, tetracycline for TetR). In all, 11 important aminoacid positions have been identified in the CamR DBD by the systematicsubstitution of residues by Ala. Of the 11 positions, 10 areeither buried in the core, and thus important for creating thehydrophobic environment, or exposed on the surface, and thusimportant for binding to DNA. The eleventh residue, Gly, seemsto be important for a loop structure. The DNA binding mode ofthis type of DBD and a general mechanism of regulating theirDNA binding are discussed in reference to the crystal structureof TetR [Hinrichs et al., (1994) Science, 264, 418–420].