Soluble and conductive polypyrrole copolymers containing silicone tegomers

Soluble and processable conductive copolymers of silicone tegomers and pyrrole were developed. This was easily accomplished by the oxidative polymerization of pyrrole monomer by Ce(IV) salt in the presence of silicone tegomers with hydroxyl chain ends. The resulting copolymers were soluble in dimethylformamide. The products were characterized by Fourier transform infrared, ¹H‐NMR, and four‐point probe conductivity, and their surface properties were investigated with contact‐angle measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2896–2901, 2003     

Utilization of Electrospun Polystyrene Membranes as a Preliminary Step for Rapid Diagnosis

Recent advances in clinical practice drive deoxyribonucleic acid (DNA) as an important class of biomarker. Monitoring the change in their concentration suggests the initiation and/or progression of various disorders. However, low quantity of DNA biomarkers in body fluids requires a delicate isolation methodology that provides efficient separation and easy handling. This study describes a newer‐generation separation technology relying on electrospun fibers of sub‐micrometer diameter of a commodity polymer for DNA biomarkers in simulative serum. Fibrous polystyrene membranes are prepared by electrospinning and they are subjected to post‐modification with Au. The composite membranes may provide a convenient environment for the removal of bovine serum albumin (BSA) from BSA and DNA mixtures. The eluent can be used as an efficient tool for detection of DNA biomarkers associated with diagnosis of numerous life‐threatening diseases.

     

Chemical Profile and Biological Activities of Two Edible Plants: Chemical Investigation and Quantitative Analysis Using Liquid Chromatography Tandem Mass Spectrometry and Gas Chromatography Mass Spectrometry

The objectives of this study were to define the phenolic and fatty acid profiles, anticholinesterase, antioxidant, antimicrobial activities, and total phenolic-flavonoid contents of Lycopsis orientalis and Tragopogon latifolius var. angustifolius which have been used as food source and food supplement in Anatolia and have never been examined before. Rosmarinic and quinic acids (21.11 and 11.46 mg g^–1 extract, respectively) were found to be the most abundant constituents in L. orientalis and T. latifolius var. angustifolius among the studied 27 compounds by liquid chromatography tandem mass spectrometry. In the fatty acid compositions of L. orientalis and T. latifolius var. angustifolius that were determined by gas chromatography mass spectrometry, oleic (29.1%) and palmitic (28.7%) acids were identified as the major components, respectively. The high antioxidant activity of the methanol extract of L. orientalis shows parallelism to its rosmarinic acid content. Besides, this extract showed medium anticholinesterase activity. The results of the present study proves that the L. orientalis might also be used as a food source due to its high phenolic acid content and strong antioxidant property.     

Green chemistry: microwave-assisted facile synthesis of 6-imino-1,3,4-thiadiazenes from reaction of thiocarbohydrazones with malononitrile dimer

The reactions of thiocarbohydrazones with malononitrile dimer under microwave irradiation are reported. These reactions give 6-imino-1,3,4-thiadiazines in good yields. The structures of products were elucidated by MS, IR and NMR spectra together with elemental analyses. The reaction mechanism was discussed.     

Transmutation-incineration potential of transuraniums discharged from PWR-UO2 spent fuel in modified PROMETHEUS fusion reactor

This study presents the potential of the burning and/or transmutation (B/T) of transuraniums (TRUs), discharged from the pressured water reactor PWR-UO₂ spent fuel, in the modified PROMETHEUS-H fusion reactor. Two different design shapes (Models A and B) were considered. The transmutation zone (TZ), which contains the mixture of TRU nuclides (10%), was located in the modified blankets. The volume fraction of Pu in the mixture is raised from 0 to 40% stepped by 10% to determine its effect on the B/T. The fuel spheres were cladded with SiC (5%) and cooled with high-pressured helium gas (85%) for nuclear heat transfer. The calculations were performed for an operation period (OP) of up to 10 years by 75% plant factor (η) under a neutron wall load (P) of 4.7 MW/m². The results bring out that: (1) the Model B transmutes the TRUs more rapidly than the Model A; (2) the effective half-lives decrease about 20 and 40% with the increase of Pu fraction in the cases of Models A and B, respectively; (3) the M values are quite high with respect to the M value of the original PROMETHEUS fusion reactor; (4) the blankets can produce substantial electricity in situ.     

Numerical Study on Effects of Fuel Mixture Fraction and Li-6 Enrichment on Neutronic Parameters of a Fusion–Fission Hybrid Reactor

This study presents the effects of mixture fractions of nuclear fuels (mixture of fissile–fertile fuels and mixture of two different fertile fuels) and ⁶Li enrichment on the neutronic parameters (the tritium breeding ratio, TBR, the fission rate, FR, the energy multiplication ratio, M, the fissile breeding rate, FBR, the neutron leakage out of blanket, L, and the peak-to-average fission power density ratio, Γ) of a deuterium–tritium (D–T) fusion neutron-driven hybrid blanket. Three different fertile fuels (²³²Th, ²³⁸U and ²⁴⁴Cm), and one fissile fuel (²³⁵U) were selected as the nuclear fuel. Two different coolants (pressurized helium and natural lithium) were used for the nuclear heat transfer out of the fuel zone (FZ). The Boltzmann transport equation was solved numerically for obtaining the neutronic parameters with the help of the neutron transport code XSDRNPM/SCALE4.4a. In addition, these calculations were performed by also using the MCNP4B code. The sub-limits of the mixture fractions and ⁶Li enrichment were determined for the tritium self-sufficiency. The considered hybrid reactor can be operated in a self-sufficiency mode in the cases with the fuel mixtures mixed with a fraction of equal to or greater than these sub-limits. Furthermore, the numerical results show that the fissile fuel breeding and fission potentials of the blankets with the helium coolant are higher than with the lithium coolant.     

Hydrogen production via water splitting process in a molten-salt fusion breeder

This study presents the hydrogen production and fissile breeding potentials of Force-Free Helical Reactor (FFHR) fueled with the molten-salt mixtures. The sulfur–iodine (S–I) thermochemical water-splitting and high-temperature electrolysis cycles, which are the most promising water-splitting cycles, are selected to produce large-scale and pure hydrogen. The XSDRNPM/SCALE4.4a neutron transport code is used for the neutronic calculations. The analyses have been performed individually for four different molten-salt mixtures, (pure FLiBe, mixture of FLiBe and ThF₄, mixture of FLiBe and UF₄, and mixture of FLiBe, ThF₄ and ²³³UF₄). The numerical results bring out that the considered molten-salt fusion breeder reactor has a high neutronic performance and can produce a considerable amount of the hydrogen production (up to 40 kg/s), as well as the fissile fuel (up to 2.5 tons/yr).     

Controlled conversion of polyacrylamide into polyacrylic acid

Interaction of nitrous acid with aqua solution of poly(acrylamide) gives poly(acrylic acid) in quantitative conversion yields. The reaction proceeds smoothly, with simultaneous evolution of nitrogen, provided that the temperature below 5 °C. The procedure presented provides a versatile route to prepare acrylic acid-acrylamide copolymers in any desired composition, by adjusting molar ratio of nitrous acid. Received: 29 January 1997/Revised: 24 July 1997/Accepted: 6 August 1997     

Occurrence of patulin and 5-hydroxymethylfurfural in apple sour,which is a traditional product of Kastamonu,Turkey

Apple sour is a traditional product of Kastamonu, Turkey. It is consumed by spreading on bread or drinking after diluting with water. The aim of this study was to determine patulin (PAT) and 5-hydroxymethylfurfural (HMF) in apple sour. This study is the first to evaluate the occurrence of PAT and HMF in apple sour. The samples were extracted with ethyl acetate using liquid-liquid extraction technique. PAT and HMF were determined by HPLC with UV detection. PAT was detected in all samples, and the PAT level in 94.9% of samples was found to be equal or greater than the legal limit for juice concentrates. The mean value for PAT was found to be 284 ± 307 μg kg^?1. PAT levels in 13 of 39 samples were in the range of 100 ≤ x < 200 μg kg^?1, two samples were in the range of 0 ≤ x < 50 μg kg ?1 and two samples were in the range of 1000 ≤ x < 1500 μg kg¹. HMF levels of all samples were above the legal limit for solid molasses. The mean value for HMF was found to be 16215 ± 13317 mg kg^?1. HMF levels of 10 of 39 samples were determined to be in the range of 10000 ≤ x < 20000 mg kg^?1, eight samples were in the range of 20000 ≤ x < 30000 mg kg^?1 and only three samples were in the range of 100 ≤ x < 1000 mg kg^?1. There was a significant and inverse relationship between HMF and pH of the samples. These results indicate that consumption of apple sour is a considerable risk in terms of HMF and PAT toxicity.