Detection of human papillomavirus in routinely processed biopsy specimens from laryngeal papillomas: evaluation of reproducibility of polymerase chain reaction and DNA in situ hybridization procedures

The frequency of human papillomavirus (HPV) in laryngeal papillomas varies largely among different studies. DNA in situ hybridization (ISH) has been the most widely used method for detection of HPV. The aim of this study was to compare the reproducibility and sensitivity of ISH with polymerase chain reaction (PCR) in 35 specimens of laryngeal papillomas routinely fixed in buffered or unbuffered formalin. Out of 12 specimens fixed in buffered formalin, 10 were positive for HPV 6/11 using ISH. The procedure was repeated three times and three specimens were positive only twice. Nine biopsies were positive for HPV using PCR with consensus primers (My 09/11) on dewaxed tissue without extracting DNA. In three repeated PCRs, the results were inconsistent in three samples. After DNA extraction, all 12 samples were positive with PCR. Of the 23 specimens fixed in unbuffered formalin, 14 were HPV-positive with ISH, while only one was positive with PCR. We concluded that PCR with My 09/11 consensus primers is a highly sensitive method for detection of HPV in laryngeal papillomas fixed in buffered formalin, but useless for samples fixed in unbuffered formalin. When DNA was extracted from the former type of fixed tissue, the results were highly reproducible. In contrast to PCR, ISH appeared to be less influenced by fixation procedure, but it was not as reproducible and sensitive as PCR. Negative results did not necessarily mean absence of HPV.     

FRACTURE ASSESSMENT FOR SECONDARY LOADS

The fracture assessment of structures subjected to secondary loading systems was studied by FEM-analysis of a few illustrative two-dimensional examples. The first example is an edge-cracked plate with a thermal gradient. The FEM-calculations revealed that a purely elastic analysis yielded J-values that are in most cases considerably more conservative than the ones calculated from an elastic-plastic analysis. The results were further compared with different engineering type non-linear estimates. As a second example a crack emanating from a semi-circular notch in a rectangular plate was chosen. The plate was subjected to uniaxial tension along its boundaries. It turned out that for the cases considered the J-values were fairly close to those elastically predicted.     

Response of dairy cows to high doses of a sustained-release bovine somatotropin administered during two lactations. 2. Health and reproduction.

Eighty-two lactating Holstein cows in their first, second, or third lactation received either one, three, or five concurrent i.m. injections of a unit dose (.6 g) of zinc methionyl bST (sometribove) or five doses of the vehicle. Injections were given at 14-d intervals from 60 +/- 3 d postpartum until the end of lactation or necropsy. Thirty-eight animals were continued on treatment for a 2nd yr. Sometribove did not affect the incidence of ketosis, milk fever, tetany, or pneumonia. Digestive disorders, primarily cows going off feed, were increased by bST during yr 1 only. The incidence of lameness was increased by bST in some time frames because of an increase in the 3.0-g bST group. Lameness was not associated with treatment-specific histopathologic changes or with abnormalities in cartilage or bone. Reproductive health generally was unaffected by treatment, but delayed conception and increased incidence of abortion were noted. Incidence of cystic ovaries was unaffected by bST. Pregnancy rates were decreased during the 100-d breeding interval of yr 1 but not during the 215-d interval of yr 2. The incidence of clinical mastitis was increased by bST, primarily at the 3.0-g dose. During the 2-yr study, 0, 3, 3, and 2 cows died or became moribund on 0, .6, 1.8, and 3.0 g of bST, respectively. Health issues identified for further evaluation included lameness and clinical mastitis for the 3.0-g group and early removal from the herd and decreased reproductive performance for all bST groups. Bovine somatotropin caused no treatment-specific toxic effects in dairy cows even at 3.0 g every 14 d.     

RP-HPLC binding domains of proteins

Procedures have been developed to identify the chromatographic binding domains of horse heart cytochrome c (Cyt c) and bovine growth hormone (bGH) during their interaction with reversed-phase sorbent materials. The procedure involves adsorption of the protein solute to the chromatographic sorbent, followed by proteolytic cleavage. Comparison of the proteolytic map obtained for Cyt c and bGH in free solution with the corresponding map obtained when these proteins are adsorbed to the chromatographic sorbent revealed significant differences in the digestion pattern. Following characterization of the peptides generated in both maps, the results indicated that specific regions on the surface of both Cyt c and bGH are inaccessible to tryptic cleavage when adsorbed to the hydrophobic surface of both a C-4 and a C-18 sorbent. Based on the assumption that the region of the protein surface that is in contact with the sorbent remains intact and bound to the sorbent during the digestion step, while the protein surface that is exposed to the solvent is accessible to proteolysis, the regions that were inaccessible to tryptic digestion were found to correspond to hydrophobic domains on the protein surface. These results also suggest that the three-dimensional structures of these proteins remain largely intact upon adsorption to the hydrophobic surface.     

Initial scalar lithospheric magnetic anomaly map of China and surrounding regions derived from CSES satellite data

Science China Technological Sciences - The China Seismo-Electromagnetic Satellite (CSES), China’s first satellite to measure geophysical fields with scientific goals in both space and solid...     

X-ray Fluorescence Uptake Measurement of Functionalized Gold Nanoparticles in Tumor Cell Microsamples

Quantitative cellular in vitro nanoparticle uptake measurements are possible with a large number of different techniques, however, all have their respective restrictions. Here, we demonstrate the application of synchrotron-based X-ray fluorescence imaging (XFI) on prostate tumor cells, which have internalized differently functionalized gold nanoparticles. Total nanoparticle uptake on the order of a few hundred picograms could be conveniently observed with microsamples consisting of only a few hundreds of cells. A comparison with mass spectroscopy quantification is provided, experimental results are both supported and sensitivity limits of this XFI approach extrapolated by Monte-Carlo simulations, yielding a minimum detectable nanoparticle mass of just 5 pg. This study demonstrates the high sensitivity level of XFI, allowing non-destructive uptake measurements with very small microsamples within just seconds of irradiation time.     

Phase Stability of Fine-Grained (Mg,Y)-PSZ

A fine-grained zirconia, which has been costabilized with yttria and magnesia, has been prepared. Its stability during subeutectoid annealing at 1100^deg;C, and its hydrothermal stability during hydrothermal treatment at 180^deg;C, have been determined and they are compared to those of Y-TZP and Mg-PSZ materials .     

Friction of linerboard based on recycled fiber

The purpose of this investigation was to study the origin of the differences in paper‐to‐paper friction of linerboards based on old corrugated containers (OCC). The sheets were subjected to two extraction stages and analyzed with respect to, surface roughness, and their content of low‐molecular‐mass lipophilic compounds (LLC). Friction was measured using a friction tester based on the horizontal plane principle. The surface roughness was measured using a Perthometer profiler and the low molecular mass lipophilic constituent of the paper sheets was determined by gas chromatography‐mass spectroscopy. The sheets were imaged using environmental scanning electron microscopy (ESEM), and the relative compositions of inorganic ions on the paper surfaces were determined by energy dispersive X‐ray spectroscopy (EDS). The results showed that a high amount of LLC in the sheets lead to low friction, due to lubrication. It was also observed that large CaCO₃ particles on the surface had a friction‐increasing effect, and that there was no relationship between the surface roughness and the friction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1511–1520, 2002     

Comparing variants of strategic ability: how uncertainty and memory influence general properties of games

Alternating-time temporal logic (ATL) is a modal logic that allows to reason about agents’ abilities in game-like scenarios. Semantic variants of ATL are usually built upon different assumptions about the kind of game that is played, including capabilities of agents (perfect vs. imperfect information, perfect vs. imperfect memory, etc.). ATL has been studied extensively in previous years; however, most of the research focused on model checking. Studies of other decision problems (e.g., satisfiability) and formal meta-properties of the logic (like axiomatization or expressivity) have been relatively scarce, and mostly limited to the basic variant of ATL where agents possess perfect information and perfect memory. In particular, a comparison between different semantic variants of the logic is largely left untouched. In this paper, we show that different semantics of ability in ATL give rise to different validity sets. The issue is important for several reasons. First, many logicians identify a logic with its set of true sentences. As a consequence, we prove that different notions of ability induce different strategic logics. Secondly, we show that different concepts of ability induce different general properties of games. Thirdly, the study can be seen as the first systematic step towards satisfiability-checking algorithms for ATL with imperfect information. We introduce sophisticated unfoldings of models and prove invariance results that are an important technical contribution to formal analysis of strategic logics.