Diagnosis Criterion of Abnormality of Transformer Winding by Frequency Response Analysis (FRA)

Frequency response analysis (FRA) is a powerful technique to detect internal abnormalities within power transformers. However, diagnosis criteria of power transformers by FRA have not been fully established yet. In this paper, a new evaluation method of degree of identification between two transfer functions is proposed. In the proposed method, a frequency window is employed and cross‐correlation factor is calculated with moving the window. Furthermore, the proposed method is applied to transfer functions of real transformers with or without some abnormalities. Based on this discussion, objective criteria for diagnosis of abnormalities of transformer windings by FRA are proposed. The proposed criteria are based on a few data of transformers with some abnormalities. Therefore, the proposed criteria are tentative and they would be improved by accumulation of further data.     

An application of interpretive structural modelling to analyse preference structure in multiobjective dynamic environmental-economic systems†

This paper applies ISM (interpretive structural modelling) to analyse preference structure in a multiobjective problem of a dynamic environmental-economic model, and terms this method IPSM (interpretive preference structural modelling). Multi-objectives in the model include minimizing social cost of pollution, and maximizing total consumption in a planning interval. IPSM analyses decision-maker's preference relations (mental model) among many Pareto-optimal solutions of the multiobjective systems under the interactive cooperation between the decision-maker and the model-builder, and extracts the decision-maker's preference structure as a hierarchical directed graph, where the vertices of the graph correspond to the Pareto-optimal solutions and the directed edges correspond to the preference relations. An interesting economic interpretation for a preferred solution is discussed in terms of the economic interpretation of the discrete minimum principle.     

Phase Equilibrium in the System CrO2-Cr2O3

The CrO₂-Cr, O₃ equilibrium curve has been determined up to 35 kbars and 1400° C with a piston-cylinder apparatus. The phases were determined by magnetic, X-ray, and microscopic examination. The phase boundary can be represented by a straight line log P versus 1/T plot, where log P = 5.3 - 1400/ T. These results can be extrapolated to agree reasonably well with the results of previous investigations using gas pressure techniques.     

Phase Equilibrium in the System MgO-H2O at High Temperatures and Very High Pressures

Phase equilibrium in the system MgO-H₂O was investigated from 500° to 1450° C at 5 to 40 kbars by a quenching technique using a piston-cylinder apparatus. Brucite decomposed to periclase plus vapor at 810° and 10 kbars, 945° and 20 kbars, 1000° and 32 kbars, and 975°C and 40 kbars. The slope of the decomposition P-T curve became steeper with increasing pressure, infinite at 32^- kbars and 1000C, and then negative above 32 kbars. The extrapolation of this curve to lower pressures agrees well with data of other workers who used hydrothermal techniques.     

Mechanism of inactivation of heat-tolerant spores of Bacillus stearothermophilus IFO 12550 by Rapid Decompression

The effect of three rapid decompression methods to clear the mechanism of inactivation of heat tolerant spores of Bacillus stearothermophilus IFO 12550 was investigated. Pressurization of the spores at 200 MPa and 75°C for 60 min caused a kill of 10⁴ CFU/mL by the link-motion system but the nonrotational rod valve and E.G. seal methods gave a kill of about 10³ CFU/mL. Sterilization was due to the physical breakdown of spore coat, and was induced by its physical permeability of water at high pressure and temperature. Rapid decompression by the link-motion system at 200 MPa decreased the D-value of the spores from 3000 min (100°C, one atmosphere) to 6 min, 11 min, and 17 min at 95, 85, and 75°C, respectively.     

Raman Spectroscopy of Heat-Treated B2O3-SiO2 Glasses

Raman spectra were measured on B₂O₃-SiO₂ glasses heat-treated at different temperatures and for different periods of time. It was found that the intensity ratio of the 810- and 475-cm⁻¹ bands depended on the thermal history and composition of glass. The intensity vs heat-treatment temperature curve exhibited a maximum in the glass-transition temperature range. High-temperature Raman spectra were measured on 0.5B₂O₃-0.5SiO₂ glass, both with increasing and decreasing temperature, between room temperature and 600°C. Above 300°C with increasing temperature, the intensity of the 810-cm⁻¹ band decreased, whereas the intensity of the 475-cm⁻¹ band increased. The changes reversed with decreasing temperature. The reversible change of the intensity of the two bands was interpreted as a reversible formation and decomposition of boroxy rings with temperature. The reaction becomes very sluggish below the glass transition so that the intensity ratio stayed constant below 300°C.     

A THEORETICAL STUDY ON ADAPTIVE QUALITY CONTROL SYSTEMS

This paper is a study of an adaptive quality control system from a viewpoint of quality goal. The main purpose is to introduce a conceptual framework for setting up quality goals which are in accordance with the external environment and internal capacity of quality control systems. We apply a mathematical general systems approach.

The results of our paper are summarized as follows:

1)As important decision-making in adaptive QCS, the decision-making for estimalion of fitness and examination of attainability are proposed and formalized mathematically.

2)A refinement process is formalized in which models are revised according to the changes of market.

3)Basic steps for setting quality goals are obtained which are based on the above formalization.     

Crystallization of Hexagonal BaNb2O6

Pure hexagonal BaNb₂O₆ crystallizes at 640° to 700°C from an amorphous material prepared by simultaneous hydrolysis of barium and niobium alkoxides. The structure is characterized by layer networks of NbO₆ octahedra. Crystallization isotherms are described by the Avrami equation In (1—f) = -ktⁿ with n=2; the activation energy is 268 kJ-mol-'. Hexagonal BaNb₂O₆ transforms to the ortho-rhombic modification one at 12.50° to 1310°C.     

Studies on numerical site calibration over complex terrain for wind turbines

The estimation of wind turbine performance over complex terrain is very difficult because of the document of standard IEC61400-12 is adapted for flat or slightly complex topography.And the cost of constructing a meteorological mast is higher with scaling wind turbine up.We have proposed a numerical site calibration(NSC) technique in order to estimate the inflow velocity at the position of wind turbine by using CFD tool to calculate the flow field around the site.The present paper shows the problems for the ...