A PTAS for Cutting Out Polygons with Lines

We present a simple O(m+n ⁶/ε ¹²) time (1+ε)-approximation algorithm for finding a minimum-cost sequence of lines to cut a convex n-gon out of a convex m-gon.     

New Results on Path Approximation

In this paper we give bounds on the complexity of some algorithms for approximating 2-D and 3-D polygonal paths with the infinite beam measure of error. While the time/space complexities of the algorithms known for other error measures are well understood, path approximation with infinite beam measure seems to be harder due to the complexity of some geometric structures that arise in the known approaches. Our results answer some open problems left in previous work. We also present a more careful analysis of the time complexity of the general iterative algorithm for infinite beam measure and show that it could perform much better in practice than in the worst case. We then propose a new approach for path approximation that consists of a breadth first traversal of the path approximation graph, without constructing the graph. This approach can be applied to any error criterion in any constant dimension. The running time of the new algorithm depends on the size of the output: if the optimal approximating path has m vertices, the algorithm performs F(m) iterations rather than n–1 in the previous approaches, where F(m) \le n–1 is the number of vertices of the path approximation graph that can be reached with at most m–2 edges. This is the first output sensitive path approximation algorithm.     

Development of a hybrid ECT sensor for JSFR SG double-wall tubes

A new design has been adopted for the steam generator (SG) tubes of the Japan Sodium-cooled Fast Reactor (JSFR) using double-wall tubes. This paper estimates and assesses the effectiveness of detecting defects in SG double-wall tubes of the JSFR by using combined high-frequency eddy current testing (ECT) and low-frequency remote field eddy current sensors. We confirm that the proposed hybrid ECT sensor is highly sensitive to small defects, fatigue cracks, and other defects even when located under support plates of tubes. The parameters of the hybrid ECT sensor are designed and optimized to detect small defects using accurate numerical simulations based on the finite element method, using an in-house developed code. The sensitivity and high performance of the hybrid ECT sensor was validated with experimental measurements.     

Molecularly imprinted poly(acrylonitrile‐co‐acrylic acid) matrix with sclareol

There are presented results regarding a new set of molecularly imprinted polymers (MIPs) based on acrylonitrile:acrylic acid (AN:AA) copolymer matrix. As template, it was used sclareol, an important anticancer bioactive compound, never used before for molecular imprinting. An emerging and insufficient studied MIP preparation method, namely the phase inversion, was used to prepare 0.8 mm spherical sclareol MIPs (S‐MIPs). Three AN:AA copolymers, having the initial monomer ratios 90:10, 80:20, and 70:30, were synthesized by radical copolymerization in emulsion, without emulsifier. After that, each copolymer was dissolved in the presence of the template (sclareol) in dimethylformamide. The imprinting and the morphology of these new materials were analyzed by rheology, elemental analysis, infrared spectroscopy, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, batch rebinding tests, and Scatchard analysis. The conclusion was that the AN:AA‐80:20 matrix proved to be the optimized solution between high rigidity (given by the AN segments) and high affinity for the template (given by AA segments), the average imprinting factor for this system being 2.67. POLYM. ENG. SCI., 54:1484–1494, 2014. © 2013 Society of Plastics Engineers     

The dependence of the photocatalytic activity of TiO2/carbon nanotubes nanocomposites on the modification of the carbon nanotubes

Nanostructural TiO₂/modified multi-wall carbon nanotubes photocatalysts were prepared by hydrolysis of Ti(iso-OC₃H₇)₄ providing chemical bonding of anatase TiO₂ nanoparticles onto oxidized- or amino-functionalized multi-wall carbon nanotubes (MWCNT). The processes of functionalization of the MWCNT and the deposition of TiO₂ influence the photocatalytic activity of the synthesized nanocomposites. The phase composition, crystallite size, and the structural and surface properties of the obtained TiO₂/modified-MWCNT nanocomposite were analyzed from XRD, FEG-SEM, TEM/HRTEM and FTIR data, as well low temperature N₂ adsorption. In the photocatalytic study, the TiO₂/oxidized-MWCNT catalyst showed the highest and the TiO₂/amino functionalized-MWCNT catalysts somewhat lower degradation rates, indicating that the enhancement of photocatalysis was supported by the more effective electron transfer properties of the oxygen- than amino-containing functional groups, which support the efficient charge transportation and separation of the photogenerated electron-hole pairs.     

Defect analysis and excitons diffusion in undoped homoepitaxial diamond films after polishing and oxygen plasma etching

Several 65 μm thick epitaxial diamond films prepared on (100) Ib substrates by high power pulsed microwave plasma assisted chemical vapour deposition (HP-MPCVD) are studied as a function of surface treatments by cathodoluminescence (CL) and photoluminescence (PL) spectroscopies. They are either asgrown, or polished, or etched by a microwave oxygen plasma, or after applying subsequently the two last processes. In CL spectra, bands due to defects occur at 2.3 eV, 3.07 eV, 3.7 eV and 4.7 eV, the last one being specific of polished surfaces, with nearly no contrast in the luminescence image. A fundamental result consists in demonstrating that the defects induced by polishing can be removed by oxygen plasma etching. Additionally, in order to assess how luminescence spectra originate from a peculiar depth or not, a bevelled sample is studied. PL spectra are acquired on the sample side while CL spectra are measured at several points on the bevel top side till to the Ib substrate. Comparison of the two sets of result show that the H3 signal originates from the Ib substrate even if it is present in the CL spectra of the film. An analysis of the change in the intensity of the TO free exciton line, defect bands and H3 signal, along decreasing photon energies, as a function of the thickness of the remaining HP-PMPCVD film, is performed with the help of a model taking the diffusion of the unrecombined excitonic pairs and the re-excited photoluminescence into account. CL images recorded at specific wavelengths, which do not show inverted contrast, are also assessed. From these data, the exciton diffusion length is evaluated to 11 μm in the major part of the epitaxial layer except for the first 20 μm close to the Ib substrate where it decreases down to 2 μm. This study sheds light on the interpretation of luminescence spectra excited by an electron beam in undoped diamond layers. Defects bands due to damages induced by polishing and etching processes are also documented.     

Equilibrium and kinetic isotherms and parameters for molecularly imprinted with sclareol poly(acrylonitrile‐co‐acrylic acid) matrix

The present work continues the previous studies concerning the synthesis and characterization of molecularly imprinted polymers (MIPs) with sclareol as template and three poly(acrylonitrile‐co‐acrylic acid) (AN:AA) copolymers with different ratios between monomers as matrices. The previous studies of rheology, elemental analysis, infrared spectroscopy, size exclusion chromatography, thermogravimetry, differential scanning calorimetry, batch rebinding tests, and Scatchard analysis, which confirmed the molecular imprinting, are being completed with the current equilibrium and kinetic adsorption studies. For this purpose, eight adsorption isotherms and three kinetic adsorption models were applied to six sets of experimental data obtained after three sclareol‐imprinted adsorbents (MIPs) and three nonimprinted adsorbents (NIPs) were submitted to batch adsorption experiments. After ordering the adsorption models according to the “minimum sum of normalized errors (SNE)” criteria, it was concluded that the adsorption in sclareol imprinted AN:AA copolymers is characterized by low surface coverage, takes place on heterogeneous binding sites and is reversible, while for NIPs the results suggest a difficult adsorption and/or easiness of template extraction, and that NIPs have homogeneous, but nonimprinted micropores. For the kinetic experiments, the minimum SNE for MIPs points to the first order kinetic model, fact that suggests a physical adsorption of template molecules on the imprinted sites. POLYM. ENG. SCI., 55:1152–1162, 2015. © 2014 Society of Plastics Engineers     

Phytochemical Characterization of Veronica officinalis L., V. teucrium L. and V. orchidea Crantz from Romania and Their Antioxidant and Antimicrobial Properties

Aerial parts of Veronica species are used in Romanian traditional medicine for the treatment of various conditions like kidney diseases, cough, and catarrh, and are known for their wound-healing properties. In the present study, the phenolic and sterolic content and the antioxidant and antimicrobial activities of three Veronica species (Plantaginaceae), V. officinalis L., V. teucrium L. and V. orchidea Crantz, were studied. The identification and quantification of several phenolic compounds and phytosterols were performed using LC/MS techniques and the main components were p-coumaric acid, ferulic acid, luteoline, hispidulin and β-sitosterol. More than that, hispidulin, eupatorin and eupatilin were detected for the first time in the Veronica genus. Nevertheless, representatives of the Veronica genus were never investigated in terms of their phytosterol content. The antioxidant potential investigated by Trolox equivelents antioxidant capacity (TEAC) and EPR spectroscopy revealed that V. officinalis and V. orchidea extracts presented similar antioxidant capacities, whilst the values registered for V. teucrium extract are lower. Regarding the antimicrobial activity of the investigated species, Staphylococcus aureus, Listeria monocytogenes and Listeria ivanovii were the most sensitive strains with MIC values between 3.9 and 15.62 mg/mL. The results obtained by this study may serve to promote better use of representatives from the genus Veronica as antioxidant and antimicrobial agents.     

Preparation and magnetoelectric properties of NiFe2O4–PZT composites obtained in-situ by gel-combustion method

Magnetoelectric composites of xNiFe₂O₄–(1 ? x)Pb(Zr,Ti)O₃ with x = 2, 5, 10, 20, 30% were prepared by citrate–nitrate combustion using PZT-based template powders. In order to ensure a better connectivity of dissimilar phases, we have used chemical methods for preparation in situ composites, followed by adequate sintering procedure. The structural, microstructural and functional properties of di-phase magnetoelectric composites of NiFe₂O₄–PZT are reported. The XRD analysis is demonstrating the synthesis of pure ferrite phase directly on the ferroelectric templates. An excellent mixing was obtained in the composite powders, as proved by a detailed SEM analysis.The magnetic and dielectric behaviors of the ceramic composites vary with the ratio of the two phases. The dielectric behavior is greatly influenced by the magnetic phase. The magnetoelectric (ME) coefficient was measured as a function of applied DC magnetic field. The maximum ME coefficient (dE/dH) varies from 0.0011 mV/(cm Oe) to 0.5 mV/(cm Oe) with increasing of NF addition.     

The improvement of the resistance to Candida Albicans and Trichophyton interdigitale of some cotton textile materials by treating with oxygen plasma and chitosan

This paper presents the improvement of the resistance to fungi of some cotton textile materials by treating in the manufacturing process with oxygen plasma and chitosan. Thus, after the weaving and preliminary finishing, the fabrics were cleaned in oxygen plasma atmosphere and after dyeing, have been treated with chitosan solution with concentrations of 1 or 5 g/l, in order to confer them antimicrobial properties. The antimicrobial tests were performed with two fungi: Candida albicans and Tricophyton interdigitale. The obtained antimicrobial effect was considerably higher compared to that of the raw fabrics. The colour resistance of dyed fabrics was not significantly influenced by applying the treatment-based chitosan.