Endoplasmic reticulum Ca(2+)-ATPase in microsomal vesicles isolated from bovine retinae

Active Ca2+ transport was measured in microsomal vesicles prepared from bovine retinae and was compared with that in disk membranes of the photoreceptor cells of the same retina. The 45Ca uptake was dependent on the presence of Mg(2+)-ATP and was inhibited by vanadate or when GTP substituted for ATP. The dependence of calcium uptake on the external free Ca2+ concentration gave a KM = 13 microM or a KM = 0.1 microM for disks and microsomal vesicles, respectively. A phosphorylated intermediate (E-P) of Ca(2+)-ATPase of about 100 kDa was isolated in microsomal vesicles. The E-P formation was strongly inhibited by thapsigargin and partially by 2,5-di-(-butyl)benzohydroquinone. Digestion of disks or microsomes with calpain had no effect on the phosphorylated intermediate, while digestion with trypsin produced two fragments of approximately 55 kDa and 35 kDa. These results suggest that bovine retinal microsomes contain a calcium pump belonging to the SERCA family.     

A study on the stability of superconducting YBa2Cu3O7−x phase

The thermal stability of the superconducting phase of nominal composition YBa₂Cu₃O_7–x -sintered pellets has been studied with respect to different temperatures (ranging from 300 to 950° C), time (ranging from 1 to 72 h), oxygen partial pressure (from 4 Pa to 1 atm) and carbon dioxide partial pressure (from 10^–4 Pa to 1 atm). Annealed samples were characterized by X-ray diffraction analysis, optical microscopy, and resistive measurements of the superconductive transition temperature. A stability field of the orthorhombic and tetragonal phases was obtained, showing a region of coexistance. The decomposition of the 1 2 3 phase is found to be strongly influenced by the presence of a small amount of CO₂ (1 p.p.m.) in the sintering atmosphere. A sintering process is proposed to avoid the formation of by-products.     

Stabilization of strict‐feedback nonlinear systems with input delay using closed‐loop predictors

In this paper, we consider the control problem of strict‐feedback nonlinear systems with time‐varying input and output delays. The approach is based on the usual observer/predictor/feedback approach, but the novelty is the use of the closed‐loop dynamics in the predictor. This approach allows to develop two designs, an instantaneous predictor and a delay differential equation‐based predictor, that both attain the same performance in terms of system trajectories and input signal as in the case with no delays. The design based on delay differential equations allows to build a cascade of predictors to deal with arbitrarily large delay bounds. The resulting controller is much simpler to implement than classical infinite‐dimensional predictors, and it is robust with respect to actuation and measurement disturbances. We illustrate the approach with an application to the control of a chaotic system with input delay. Copyright © 2016 John Wiley & Sons, Ltd.     

Hysteretic Critical State in Coplanar Josephson Junction with Monolayer Graphene Barrier

Coplanar Al/graphene/Al junctions fabricated on the same graphene sheet deposited on silicon carbide (SiC), show robust Josephson coupling at subKelvin temperature, when the separations between the electrodes is below 400 nm. Remarkably, a hysteretic Critical State sets in when ramping an orthogonal magnetic field, with a sudden collapse of the Josephson critical current I _c when turning the field on, and a revival of I _c when inverting the sweep. Similar hysteresis can be found in granular superconducting films which may undergo the Berezinskii-Kosterlitz-Thouless transition. Here, we give quantitative arguments to prove that this odd behavior of the magnetoconductance gives evidence for an incipient Berezinskii-Kosterlitz-Thouless transition with drift and pinning of fluctuating free vortices induced by the current bias.     

ISS feedback control redesign for continuous stirred tank reactors

In this paper a new nonlinear feedback control law for continuous stirred tank reactors, obtained by exact Input/Output (I/O) linearization and Sontag's input‐to‐state stability feedback control redesign methods, is studied. By the new feedback control law, a significant attenuation of the disturbance effect is guaranteed, with evident improvement with respect to control laws obtained by the exact I/O linearization method. The performed simulations validate the theoretical results. Copyright © 2010 John Wiley & Sons, Ltd.     

Modeling and gradient pattern analysis of irregular SFM structures of porous silicon

Technological applications in opto-electronic devices have increased the interest in characterizing porous silicon structure patterns. Due to its physical properties, solutions from KPZ 2D are adopted to simulate the structure of porous material interface whose spatial characteristics are equivalent to those found in porous silicon samples. The analysis of the simulated and real Scanning Force Microscopy (SFM) surfaces was done using the Gradient Pattern Analysis (GPA). We found that the KPZ 2D model presented asymmetry levels compatible with the irregular surfaces observed by means of SFM images of π-Si.     

The Liapunov's second method for continuous time difference equations

Among many other cases such as economic and lossless propagation models, continuous time difference equations are encountered as the internal dynamics in a class of non‐linear time delay systems, when controlled by a suitable state feedback which drives the output exponentially to zero. The Liapunov's second method for these infinite dimensional systems has not been extensively investigated in the literature. This paper has the aim of filling this gap. Liapunov's second method theorems for checking the stability and the asymptotic stability of this class of infinite dimensional systems are built up, in both a finite and an infinite dimensional setting. In the finite dimensional setting, the Liapunov function is defined on finite dimensional sets. The conditions for stability are given as inequalities on continuous time. No derivatives are involved, as in the dynamics of the studied systems. In the infinite dimensional setting, the continuous time difference equation is transformed into a discrete time system evolving on an infinite dimensional space, and then the classical Liapunov theorem for the system in the new form is written. In this paper the very general case is considered, that is non‐linear continuous time difference equations with multiple non commensurate delays are considered, and moreover the functions involved in the dynamics are allowed to be discontinuous, as well as the initial state. In order to study the stability of the internal dynamics in non‐linear time delay feedback systems, an exogenous disturbance is added, which goes to zero exponentially as the time goes to infinity. An example is considered, from non‐linear time delay feedback theory. While the results available in the literature are inconclusive as far as the stability of that example is concerned, such stability is proved to hold by the theorems developed in this paper, and is validated by simulation results. Copyright © 2003 John Wiley & Sons, Ltd.     

Optical and electrical characterization of carbon nanoparticles produced in laminar premixed flames

Optical and electrical properties of carbonaceous particles produced in laboratory scale, premixed ethylene/air flames are obtained. Light absorption and Raman spectroscopy show that the change in particle nanostructure follows a graphitization trajectory as the flame richness increases. The optical band gap decreases and the size of the aromatic network in the particle increases, while the interlayer spacing between parallel layers decreases. The electrical conductivity of the materials increases by increasing flame richness in agreement to the graphitization trajectory. A non-ohmic behavior has been found and explained in terms of electron tunneling in a percolative network. Our results show that the electrical properties of flame formed carbon nanoparticles are strongly dependent on their nanostructure, and hence they have to be used carefully for the determination of particle concentration with conductometric sensors. Moreover, the dependence of the electrical properties of combustion formed particles might be useful for the development of cheap sensors for the selective detection of different classes of combustion aerosols.     

Novel quasi-autothermal hydrogen production process in a fixed-bed using a chemical looping approach: A numerical study

This paper presents a novel quasi-autothermal hydrogen production process. The proposed layout couples a Chemical Looping Combustion (CLC) section and a Steam Methane Reforming (SMR) one. In CLC section, four packed-beds are operated using Ni as oxygen carrier and CH₄ as fuel to continuously produce a hot gaseous mixture of H₂O and CO₂. In SMR section, two fixed-beds filled with Ni-based catalyst convert CH₄ and H₂O into a H₂-rich syngas. Four heat exchangers were employed to recover residual heat content of all the exhaust gas currents. By means of a previously developed 1D numerical model, a dynamic simulation study was carried out to evaluate feasibility of the proposed system in terms of methane conversion (100% circa), hydrogen yield (about 0.65 mol_H2/mol_CH4) and selectivity (about 70%), and syngas ratio (about 2.3 mol_H2/mol_CO). Energetic and environmental analyses of the system performed with respect to conventional steam methane reforming, highlights an energy saving of about 98% and avoided CO₂ emission of about 99%.