Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

On the performance of different capability indices under normal and non-normal distributions

In this article, we have examined the performance of some useful capability indices using normal and non-normal distributions. The confidence intervals are calculated and mean coverage rates are observed for different capability indices. The effects of symmetry and kurtosis of parent distributions are examined on the mean coverage rates of different capability indices. Moreover, we have investigated the robustness (of confidence interval) using the median and percentile-based indices. We have considered the well-known distributions including normal, gamma, t, Weibull, and chi-squared. For these process scenarios, we have observed that some indices resist disturbance only in symmetry of the parent distribution, some resist the disturbance in symmetry and kurtosis of the distribution, and some indices don’t resist against either type of disturbance.     

On the Efficiency of Runs Rules Schemes for Process Monitoring

There are two main types of variations, namely, common and special causes leading to in‐control and out‐of‐control states, respectively. Control charts are popular tools used to differentiate between these two states of a process. Implementation of runs rules schemes with control charts is an attractive approach for process monitoring. This study is designed to describe the methodology of runs rules schemes and discuss their implementation for different types of control charts. We have considered memory‐less charts, namely, , S, and R charts for our study purposes. It is examined that the efficiency gain depends on the number of decision points utilized to implement a given rule. Moreover, superiority of runs rules schemes may vary for different types of location and dispersion charts. An application example using a dataset is also included in the study for practical considerations. Copyright © 2015 John Wiley & Sons, Ltd.     

A New Combined Shewhart–Cumulative Sum S Chart for Monitoring Process Standard Deviation

The combined application of a Shewhart chart and cumulative sum (CUSUM) control chart is an effective tool for the detection of all sizes of process shifts as the scheme combines the advantages of a CUSUM at detecting small to moderate shifts and Shewhart for the quick detection of very large shifts. This article proposes new combined Shewhart–CUSUM S charts based on the extreme variations of ranked set sampling technique, for efficient monitoring of changes in the process dispersion. Using Monte Carlo simulations, the combined scheme is designed to minimize the average extra quadratic loss over the entire process shift domain. The results show that the combined Shewhart–CUSUM S charts uniformly outperform several other procedures for detecting increases and decreases in the process variability. Moreover, the proposed scheme can detect changes that are small enough to escape the Shewhart S chart or fairly large to escape detection by the CUSUM S chart. Numerical example is given to illustrate the practical application of the proposed scheme using real industrial data. Copyright © 2015 John Wiley & Sons, Ltd.     

Chitosan/CNTs nanocomposite as green carrier material for pesticides controlled release

Chitosan-based nanocomposites containing gamma-treated carbon nanotubes (CNTs) were developed for controlled release of pesticide. The CNTs were irradiated under gamma irradiation in air at different doses. The transmission electron microscopic images of gamma-treated CNTs showed disentanglement of the tubes without distorting their tubular structure which effectively increased the dispersion properties of CNTs in nanocomposites. X-ray diffraction analysis of CNTs showed some structural changes, and an irradiation dose of 150 kGy is the most effective. Azinphos methyl (AZM) was selected as a model drug, and its release was studied using HPLC technique. Controlled release response of CNTs-based nanocomposites opens a new avenue for pesticides applications because it requires less quantity of pesticides. As a result, the side effects of pesticide in our environment are minimized.     

Integration of millimeter-wave and optical link for duplex transmission of hierarchically modulated signal over a single carrier and fiber for future 5G communication systems

Telecommunication Systems - Integration of optical and millimeter-wave systems provide a promising solution for future giga-bits per second wireless communication systems. We have proposed and...     

Synthesis and characterization of novel curcumin based polyurethanes varying diisocyanates structure

In this research work, novel polyurethanes (PUs) based on blends of curcumin/1,4-butane diol (BDO) by varying the structure of diisocyanates were prepared following step growth polymerization. Structural study of blends and various diisocyanates based PU through Fourier Transform Infrared (FTIR) spectroscopy confirmed the incorporation of curcumin into the backbone of the PU. The scanning electron microscopic (SEM) study confirmed the well dispersion of incorporated curcumin and homogeneity of surface of synthesized samples. The SEM results also indicated that surface morphology of synthesized samples much dependent on diisocynates structure. Moreover SEM images inferred that phase separation is more pronounced in aromatic diisocyanate based PU. The anti-bacterial and anti-fungal tests were performed against different strains in order to determine the biocompatibility of the curcumin based PU. The antimicrobial activity results revealed that the material having aromatic diisocyanate are more biocompatible than the aliphatic diisocyanates in the PU structure. On the whole, this work is actually a step towards the generation of novel biocompatible materials preferably useful for biomedical applications.     

Boosting the performance of visible light‐driven WO3/g‐C3N4 anchored with BiVO4 nanoparticles for photocatalytic hydrogen evolution

In this article, a ternary WO₃/g‐C₃N₄@ BiVO₄ composites were prepared using eco‐friendly hydrothermal method to produce efficient hydrogen energy through water in the presence of sacrificial agents. The prepared samples were characterized by scanning electron microscopy (SEM), scanning transmission electron microscopy (STEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), ultraviolet‐visible (UV‐vis), Brunauer‐Emmett‐Teller (BET) surface area, and photoluminescence spectroscopy (PL) emission spectroscopy. The experimental study envisages the formation of 2‐D nanostructures and observed that such kinds of nanostructures could provide more active sites for photocatalytic reduction of water and their inherent reactive‐species mechanism. The results showed the excellent photocatalytic performance (432 μmol h^?1 g^?1) for 1.5% BiVO₄ nanoparticles in WO₃/g‐C₃N₄ composite when compared with pure WO₃ and BiVO₄. The optical properties and photocatalytic activity measurement confirmed that BiVO₄ nanoparticles in WO₃/g‐C₃N₄ photocatalyst inhibited the recombination of photogenerated electron and holes and enhanced the reduction reactions for H₂ production. The enhanced photocatalytic efficiency of the composite nanostructures may be attributed to wide absorption region of visible light, large surface area, and efficient separation of electrons/holes pairs owing to synergistic effects between BiVO₄ and WO₃/g‐C₃N₄. The prepared samples would be a precise optimal photocatalyst to increase their suppliers for worldwide applications especially in energy harvesting.