Critical heat flux on a flat plate heater located at the middle of a duct in forced flow of pressurized He II

Critical heat fluxes (CHFs) were measured for two types of rectangular ducts containing horizontal flat plate heaters. One has the flat plate heater of 6 mm wide and 20 mm long located on the inner lower wall at 50 mm from the inlet. The other duct has two horizontal flat plates of 6 mm wide and 20 mm long on inner upper and lower walls at 50 mm from the inlet. The equation of CHF for the forced convection containing a new nondimensional-parameter m introduced in order to calculate cross-sectionally averaged liquid temperature at the center of the duct was derived based on two fluid model, ordinary convection theorem and experimental results. It was confirmed that this correlation can describe not only the author's data on the duct but also other worker's data for channels with different shapes and sizes.     

Growth of Potassium Titanate Fibers in Flowing N2 Gas

The length of potassium titanate fibers produced by several conventional methods averages 50 μm, with a maximum of 100 μm. Extremely long fibers (most >1000 μm long) were obtained by calcination in N₂ gas flowing at 5.2×10^-4 m/s.     

Analysis of secretion and expression of platelet-derived growth factor in cultured endothelial cells from stroke-prone spontaneously hypertensive rat

1. We characterized the endothelial cell-derived growth factors of SHRSP and Wistar Kyoto rats (WKY), respectively and found that platelet-derived growth factor (PDGF)-B chain related growth factor constituted a major portion of the mitogenic activity of the conditioned media of endothelial cells from both animals. There were no remarkable qualitative differences between the endothelial cell-derived growth factors of SHRSP and WKY. 2. Northern analysis revealed that the expression of PDGF-B chain was 2-4-fold enhanced in cultured aortic endothelial cells of SHRSP. This enhanced expression of PDGF-B chain, which may be induced under chronic hypertensive conditions, is suggested to contribute to the increase in endothelial cell-derived growth factors reported in this animal.     

Properties of Stabilizing PID Gain Set in Parameter Space

The properties of the PID gain set for which all the closed-loop poles lie in the left half of the complex plane are examined on the parameter plane. A new method of determining the increase in the number of unstable poles when the gain crosses the boundary of stability regions is proposed. This method is useful for determining the number of unstable poles in each region. These results are extended to Gamma-stability based on conformal mapping.     

The combined method: a novel access technique for fetal endoscopic surgery

BACKGROUND/PURPOSE: To develop practical and less invasive techniques for fetal endoscopic surgery, new methods of lifting the uterine wall to allow fetal surgery without maternal laparotomy were developed and assessed. METHODS: Fetal endoscopic surgical procedures, including tracheostomy and umbilical vascular cannulation, were performed using one of the three methods to enter the uterus without maternal laparotomy in pregnant goats (n = 6; 105 to 115 days' gestation): (1) direct uterine lifting with an air-cushion device; (2) indirect uterine lifting, in which the uterine wall was fixed to the maternal abdominal wall using balloon tip ports inserted percutaneously by Seldinger's method, then the maternal abdomen was lifted mechanically; and (3) combined method, in which low pressure CO2 (5 mm Hg for initial inflation and 2 mm Hg for maintenance) was insufflated into the uterus in addition to the indirect uterine lifting cited above. RESULTS: The direct uterine lifting caused massive injury of myometrium and uterine membranes. The creation of intrauterine space and the protection of the membranes were not accomplished effectively by the indirect uterine lifting only. The combined method provided the adequate intrauterine space and excellent endoscopic visibility for completion of the endoscopic procedures with minimal uterine injury. CONCLUSION: The fetal endoscopic surgery may be accomplished simply and safely by the combined method, a novel technique of uterine lifting to allow fetal surgery without maternal laparotomy.     

Software engineering in Asia

Asia boasts a growing software industry spread across several countries. However, software technology in Asia still lags behind the US. To become competitive in the global marketplace, many Asian countries have started to improve their university systems and software-development industries. If successful, by 2001 their efforts will create an Asian software industry quite different from today's. The authors survey these efforts and sketch briefly the history of software development in each country. They survey recent trends in Asian software engineering from the industrial, educational, and organizational viewpoints, and offer an optimistic assessment of efforts toward modernization and regional cooperation     

Organic–silicate hybrid catalysts based on various defined structures for Knoevenagel condensation

Two types of organic–inorganic hybrid base catalysts are prepared. Organic-functionalized molecular sieves (OFMSs), particularly “amine-immobilized porous silicates”, are designed based on common idea to immobilize catalytic active sites on silicate surface. Silicate–organic composite materials (SOCMs), such as “ordered porous silicate–quaternary ammonium composite materials”, are the precursors of ordered porous silicates obtained during the synthesis. Both the OFMS and the SOCM are used as the catalysts for Knoevenagel condensation. Among the OFMSs, there is clear tendency that the use of molecular sieve with larger pore volume and/or surface area gives the product in higher yield. Aminopropylsilyl (AP)-functionalized mesoporous silicates such as AP-MCM-41 gives the product in high yield under mild conditions. No loss of activity is observed after repeated use for three times. The SOCMs are also active for the same reaction. The precursors of the mesoporous silicates are more active than those of microporous silicates. This material can be repeatedly used without significant loss of activity. High activity is not due to the leached species. The active sites of the SOCM catalysts are considered to be SiO⁻ moieties located on the pore-mouth. Activity of the SOCM increases when the reaction is carried out without solvent, whereas decrease in activity of the OFMS is observed in the solvent-free system.     

Upper and lower critical solution temperatures in poly (ethylene glycol) solutions

Upper and lower critical solution temperatures have been determined for solutions of poly(ethylene glycol) in t-butyl acetate and water over the molecular weight range of M_η = 2.18 × 10³ to ～1020 × 10³. The phase diagram for solutions of poly(ethylene glycol) (M_η = 719 × 10³) in t-butyl acetate was expressed as the ‘hour glass’ type, while the phase diagram for solution of poly(ethylene glycol) (M_η = 2.18 × 10³ to ～2.29 × 10³) in water was expressed as the ‘closed loop’ type. The value of the pressure dependence of the lower critical solution temperature $\text{(}\text{d}\text{T}\text{d}\text{P}\text{)}{}_{\mathrm{c}}$ in the poly(ethylene glycol) (M_η = 1020 × 10³)/water system over the pressure range of 0 to ～50 atm was negligibly small and positive.     

Gain‐Scheduled Control via Switching of LTI Controllers and State Reset

This paper proposes a synthesis method of gain‐scheduled control systems that switch linear time‐invariant controllers according to hysteresis of the scheduling parameter. Stability and L₂‐gain analysis and synthesis methods for switched systems are applied to the switched gain‐scheduled control synthesis using reset of the controller state, where also the reset law is computed via linear matrix inequalities (LMIs). In addition to optimization of an upper bound of L₂‐gain, we reduce jumps of control input via an auxiliary optimization. Numerical examples are presented to illustrate the switched gain‐scheduled controller.