Implicit and hybrid methods for attribute weighting in multi-attribute decision-making: a review study

Artificial Intelligence Review - Attribute weighting is a task of paramount relevance in multi-attribute decision-making (MADM). Over the years, different approaches have been developed to face...     

Long short-term cognitive networks

Neural Computing and Applications - In this paper, we present a recurrent neural system named long short-term cognitive networks (LSTCNs) as a generalization of the short-term cognitive network...     

Fabrication of a multichannel wavelength-division multiplexing-passive optical net demultiplexer with arrayed-waveguide gratings and diffractive optical elements

A novel, to our knowledge, integrated wavelength-division multiplexing-passive optical net demultiplexer that uses an arrayed-waveguide grating and diffractive optical elements is presented. The demultiplexer is used to distribute 1.3-mum wavelength signals and to multiplex an eight-channel wavelength-division multiplexer spectrum at a 1.55-mum wavelength. The device shows high functionality and good optical performance. The measured cross talk was less than -21 dB, and the 3-dB bandwidth was determined to be 97 GHz, which is close to the theoretical value of 93 GHz. Average losses of 4.5 and 8 dB were measured for the 1.3- and the 1.55-mum signals, respectively.     

Accurate interferometric system to perform the substrate focusing and alignment in laser writing processes

Abstract

A simple, low cost system useful in laser writing processes to set the focal spot on the substrate surface with micrometre precision is described. Evaluation of its sensitivity is also presented. The lack of essential critical adjustments accounts for the utility of this system and its performance.     

Dependence of the network structure of cured styrene butadiene rubber on the sulphur content

An investigation about the dependence of the physical properties of styrene-butadiene rubber copolymers (cured with different sulphur content, in order to obtain various networks) on the crosslink density was carried out by means of dynamical mechanical analysis, differential scanning calorimetry and positron annihilation lifetime spectroscopy. SBR specimens were cured with different sulphur content, in order to obtain various networks. On increasing the crosslink density, the glass transition temperature increases and the fractional free volume decreases. The thermal expansion coefficient of the free volume decreases in the rubbery phase by increasing the crosslink density, owing to the slower rate of expansion of nanoholes; furthermore, it seems influenced by the percentage of polysulfide density. The density of nanoholes is independent of the temperature, but decreases on adding sulphur. The results can be framed within the Simha-Somcynsky free volume theory.     

Cloud parameter retrievals from Meteosat and their effects on the shortwave radiation at the surface

A method based on Spinning Enhanced Visible and Infrared Imager (SEVIRI) measured reflectance at 0.6 and 3.9 µm is used to retrieve the cloud optical thickness (COT) and cloud effective radius (r_e) over the Iberian Peninsula. A sensitivity analysis of simulated retrievals to the input parameters demonstrates that the cloud top height is an important factor in satellite retrievals of COT and r_e with uncertainties around 10% for small values of COT and r_e; for water clouds these uncertainties can be greater than 10% for small values of r_e. The uncertainties found related with geometries are around 3%. The COT and r_e are assessed using well-known satellite cloud products, showing that the method used characterize the cloud field with more than 80% (82%) of the absolute differences between COT (r_e) mean values of all clouds (water plus ice clouds) centred in the range from ±10 (±10 µm), with absolute bias lower than 2 (2 μm) for COT (r_e) and root mean square error values lower than 10 (8 μm) for COT (r_e). The cloud water path (CWP), derived from satellite retrievals, and the shortwave cloud radiative effect at the surface (CRE_SW) are related for high fractional sky covers (F_sc >0.8), showing that water clouds produce more negative CRE_SW than ice clouds. The COT retrieved was also related to the cloud modification factor, which exhibits reductions and enhancements of the surface SW radiation of the order of 80% and 30%, respectively, for COT values lower than 10. A selected case study shows, using a ground-based sky camera that some situations classified by the satellite with high F_sc values correspond to situations of broken clouds where the enhancements actually occur. For this case study, a closure between the liquid water path (LWP) obtained from the satellite retrievals and the same cloud quantity obtained from ground-based microwave measurements was performed showing a good agreement between both LWP data set values.     

Lavandula luisieri essential oil as a source of antifungal drugs

This work reports the antifungal activity of Lavandula luisieri essential oils against yeast, dermatophyte and Aspergillus strains responsible for human infections and food contamination. The oil's cytotoxicity and its effect on the yeast-mycelium transition in Candida albicans, an important virulence factor, were also evaluated. Analyses by GC and GC/MS showed a peculiar composition of irregular monoterpenes. Significant differences between the samples occurred in the amounts of 1,8-cineole, fenchone and trans-α-necrodyl acetate. The oil with higher amounts of irregular monoterpenes was the most effective. The influence of the oils on the dimorphic transition in C. albicans was also studied through the germ tube inhibition assay. Filamentation was completely inhibited at concentrations sixteen times lower than the minimal inhibitory concentration. The results support the use of L. luiseiri essential oils in the development of new phytopharmaceuticals and food preservatives and emphasise its antifungal properties at concentrations not cytotoxic or with very low detrimental effects on mammalian cells.     

Yield and internal stresses in aluminum filled epoxy resin. A compression test and positron annihilation analysis

The influence of the filler content on the mechanical properties of an epoxy resin composite filled with aluminum powder was investigated. Compressive tests were performed at room temperature and at different strain rates. The response of the composites was also studied by positron annihilation lifetime spectroscopy. The dependence of the yield stress on the filler content is shown. The results are discussed in terms of a proposed model that takes into account the contribution of the filler powder. To this purpose information from positron spectroscopy is important since it allows to correctly evaluate the internal stresses introduced in the composite epoxy lattice by the metal filler.     

Hydrodynamics and recovered papers deinking in an ozone flotation column

This work was aimed at investigating the potential use of ozone flotation for recovered papers deinking. The mixing characteristics and the bubble size of a Venturi aerated laboratory flotation column were studied in the presence of simplified model systems and of an industrial pulp slurry. Experimental results showed that surfactants dissolved in the pulp slurry stabilized air bubbles while cellulose fibers promoted coalescence. Moreover, bubble buoyancy was sufficient to fluidize the fiber suspension generating perfect mixing. The gas–liquid transfer coefficient of ozone (k_La) estimated from gas hold-up, air bubble size and k_La measured in water was high enough (0.84 1/s) for the complete transfer of ozone in the pulp slurry and the generation of ozone-free gas effluent. With O₃ dosage of 0.8 mg O₃/mg COD, ozone flotation allowed increasing chemical oxygen demand removal from 41 to 63% with no effect on the ink flotation efficiency, which remained close to that obtained with air flotation, i.e. ～92%.     

Reported tailings dam failures. A review of the European incidents in the worldwide context

A detailed search and re-evaluation of the known historical cases of tailings dam failure was carried out. A corpus of 147 cases of worldwide tailings dam disasters, from which 26 located in Europe, was compiled in a database. This contains six sections, including dam location, its physical and constructive characteristics, actual and putative failure cause, sludge hydrodynamics, socio-economical consequences and environmental impacts. Europe ranks in second place in reported accidents (18%), more than one third of them in dams 10-20 m high. In Europe, the most common cause of failure is related to unusual rain, whereas there is a lack of occurrences associated with seismic liquefaction, which is the second cause of tailings dam breakage elsewhere in the world. Moreover, over 90% of incidents occurred in active mines, and only 10% refer to abandoned ponds. The results reached by this preliminary analysis show an urgent need for EU regulations regarding technical standards of tailings disposal.