Effect of MQL and nanofluid on the machinability aspects of hardened alloy steel

Abstract

The current research comprises of various machinability aspects of 4340 hardened alloy steel which are scrutinized with in context of improvements in main cutting force, tool flank wear, crater wear, surface roughness, micro-hardness, machined surface morphology, chip morphology, chip reduction coefficient and apparent coefficient of friction under three different cutting fluid applications i.e. compressed air, water soluble coolant and nanofluid (using eco-friendly radiator coolant as the base fluid and Al₂O₃ as the nanoparticle) using uncoated cermet cutting inserts and a comparative assessment was performed to select which fluid performed better in terms of various machining attributes among three cutting fluids. The minimum quantity lubrication technique (MQL) was used in which a smaller volume of coolant sprinkled at high pressure. This method is found as the most effective alternative to minimize health risks and machining costs, which is quite high in other setups. The test specimen was machined at three different cutting speeds i.e. 100, 120 and 140?m/min along with two machining parameters i.e. feed and depth of cut were kept constant respectively at 0.2?mm/rev and 0.4?mm. Outcomes made a conclusion that Al₂O₃ enriched ecofriendly nanocoolant outperformed both compressed air and water soluble coolant in terms of every machinability aspects.     

Profile of Triacylglycerols,Phenols, and Vitamin E of Manjari Medika Grape Seed Oil and Cake: Introducing a Novel Indian Variety

The aim of the study is to investigate the biochemical composition of grapeseed oil and cake from an unexplored Indian grape‐juice cultivar, Manjari Medika (MM). The composition of oil and residual seed cake is evaluated using various chromatographic and spectroscopic techniques. The findings demonstrate that the vitamin E content of MM‐seed oil (1.15–1.35 g kg^?1) is distinctively higher than the Codex standard, suggesting its superior quality as an edible oil. The predominant triacylglycerols include trilinolein (LLL, 43%), dilinoleoyl‐stearylglycerol (LSL, 19%), and dilinoleoyl‐palmitoylglycerol (LLP, 11%), which are earlier recognized as natural antioxidants. The seed‐cake is rich in polyphenols including acylated anthocyanins (e.g., pelargonidin‐3‐O‐coumaroyl glucoside) and certain other flavonoids (e.g., catechin). The profile of phytonutrients in MM seed‐oil and cake is significantly superior to its seeded female parent and two other widely cultivated wine‐grape varieties. In brief, the studied by‐products of this new grape‐juice cultivar can be an important source of high‐value ingredients for use in food supplements, nutraceuticals, and functional foods. Practical applications: This study reports the phytochemical profile of the seed‐oil and seed cake derived from a newly developed grape variety, Manjari Medika. High contents of selective antioxidants: lipids, vitamin E, and phenols in the seed‐oil and cake with health benefits suggest their potential for use in nutraceutical and functional foods. These byproducts can be utilised as ingredients of functional foods and nutraceuticals (e.g., grape seed oil capsule) and also as raw materials in food supply chains (e.g., for production of grape cookies or cake). MM can also be utilized as a colorant in the food industry.     

Attribute Allocation and Retrieval Scheme for Large-Scale Sensor Networks

Wireless sensor network is an emerging technology that enables remote monitoring of large geographical regions. In this paper, we address the problem of distributing attributes over such a large-scale sensor network so that the cost of data retrieval is minimized. The proposed scheme is a data-centric storage scheme where the attributes are distributed over the network depending on the correlations between them. The problem addressed here is similar to the Allocation Problem of distributed databases. In this paper, we have defined the Allocation Problem in the context of sensor networks and have proposed a scheme for finding a good distribution of attributes to the sensor network. We also propose an architecture for query processing given such a distribution of attributes. We analytically determine the conditions under which the proposed architecture is beneficial and present simulation results to demonstrate the same. To the best of our knowledge, this is the first attempt to determine an allocation of attributes over a sensor network based on the correlations between attributes.     

A comparative thermodynamic study of sorption systems: second law analysis

As a consequence of the phasing out of CFCs, sorption systems appear to be potential candidates to replace vapour compression systems. Amongst sorption systems there exists a choice between several systems, such as liquid absorption, solid adsorption and chemical reaction heat pumps. Nevertheless, few comparative studies between these systems have been undertaken so far. It is the aim of this paper to present such a study based on combined first and second law thermodynamical analysis of the different cycles. Simple entropy generation processes explain why the basic cycles for these systems yield performances much lower than the Carnot efficiency. The possibility of operating regenerative cycles with internal heat recovery and higher efficiencies has also been considered for typical common base conditions. Different entropy generation considerations have been visualised, such as thermal coupling (external/internal), non-uniform temperature component entropy production and other irreversible processes for the COP degradation in these systems. It is found that thermal coupling irreversibilities in solid sorption systems and other internal irreversibilities in liquid sorption systems with solution heat exchanger are dominant in the actual COP degradation with respect to the reversible Carnot COP.     

A 4-MB on-chip L2 cache for a 90-nm 1.6-GHz 64-bit microprocessor

A 4-MB L2 data cache was implemented for a 64-bit 1.6-GHz SPARC(r) RISC microprocessor. Static sense amplifiers were used in the SRAM arrays and for global data repeaters, resulting in robust and flexible timing operation. Elimination of the global clock grid over the SRAM array saves power, enabled by combining the clock information with array select signals. Redundancy was implemented flexibly, with shift circuits outside the main data array for area efficiency. The chip integrates 315 million transistors and uses an 8-metal-layer 90-nm CMOS process.     

Relationships between multiaxial stress states and internal fracture patterns in sphere-impacted silicon carbide

Internal fracture patterns developed in silicon carbide cylindrical targets as a result of dynamic indentation (63–500 m/s) by tungsten carbide spheres are defined. Microscopy of recovered and sectioned targets delineate into three regions, each associated with distinct cracking modes, i.e., shallow cone macrocracking at and near the impact surface, steep interior cone macrocracks that radiate into the target from the impact region and local grain-scale microcracking directly underneath the impact region. The observed fracture patterns are found to maintain a noticeable degree of self-similarity upto the impact velocity of 500 m/s. Linear elastic analysis of the full (surface and interior) stress field developed under static (Hertz) contact loading delineate the target into four regions, based on the number of principal stresses that are tensile (none, 1, 2 or all 3). A strong correlation is found between the principal stress conditions within each region and the forms of cracking, their locations and orientations present therein. This correlation has a number of implications, including non-interaction of crack systems, which are discussed. Illustrative linear elastic fracture mechanics analyses are performed for three regions, and calculated and observed macrocrack lengths are found to be in reasonable agreement.     

Evaluation of solid-desiccant-based evaporative cooling cycles for typical hot and humid climates

This paper presents an evaluation of various solid desiccant cycles for air conditioning in hot and humid climates. Psychometric evaluation of potential cycles for 16 typical Indian cities has been carried out with the objective of achieving standard comfort conditions in the room. Computer simulation is based on constant effectiveness of heat exchangers and evaporative coolers and actual performance data of a commercially available desiccant wheel dehumidifier. The influence of various outdoor conditions, the effectiveness of heat exchangers/evaporative coolers on the cooling coefficient of performance and volumetric air flowrate per unit cooling capacity have been investigated. It is found that amongst ventilation, recirculation and Dunkle cycles, the Dunkle cycle is better for a wide range of outdoor conditions. However, cycles using wet surface heat exchangers give even higher performance.     

Oxidation of some aliphatic polyols on anodically deposited MnO2

Galvanostatic steady state current potential measurements were carried out for oxidation of a series of aliphatic alcohols having varying number of hydroxyl groups. The anodically deposited layer of MnO₂ on platinum was used as the electrode material. The deposit was characterised by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDAX) and electrode potential measurements. The catalytic role of MnO₂ in the electro-oxidation of alcohols was indicated by the chronopotentiograms and the cyclic voltammograms. An analysis of the electrochemical data indicated a catalytic EC mechanism in which Mn (V) is generated electrochemically and consumed chemically in succession. Based on this and the hydrogen bonding interaction between alcoholic hydroxyl groups and MnO₂ layer, a mechanism was proposed which accounts for the variation in the observed electrochemical reaction orders. Tafel behaviour was found to be followed only approximately. Current efficiency of the electrochemical oxidation of polyols was studied. Replacement of platinum by carbon as current collector was found to leave the electrocatalytic activity of the MnO₂ deposit practically unaltered.