Charge density dependence of elastic modulus of strong polyelectrolyte hydrogels

The mechanical behavior of a series of strong polyelectrolyte hydrogels based on acrylamide and 2-acrylamido-2-methylpropane sulfonic acid sodium salt (AMPS) was investigated. The hydrogels were prepared at a fixed crosslinker ratio and monomer concentration, but at various charge densities, i.e. AMPS contents between 0 and 100 mol%. The elastic modulus of the hydrogels after their preparation first increases with increasing charge density but then decreases continuously. Investigation of the swollen state properties of the hydrogels shows existence of a large number of ionic groups inside the gel that are ineffective in gel swelling. The results indicate two opposite effects of charged groups on the elastic modulus of the hydrogels: formation of multiplets acting as additional crosslinks in the gel increases the elastic modulus of ionic hydrogels, whereas the effect of the electrostatic interaction of charged groups on elastic free energy decreases the modulus.     

Fuzzy Bayesian reliability and availability analysis of production systems

To have effective production planning and control, it is necessary to calculate the reliability and availability of a production system as a whole. Considering only machine reliability in the calculations would most likely result unmet due dates. In this study, a new modelling approach for determining the reliability and availability of a production system is proposed by considering all the components of the system and their hierarchy in the system structure. Components of a production system are defined as production processes; components of the processes are defined as sub-processes. In this hierarchical structure we could model all kinds of failures such as material and supply, management and personnel, and machine and equipment. In the analysis, a fuzzy Bayesian method is used to quantify the uncertainties in the production environment. The suggested modelling approach is illustrated on an example. In the example, also a separate reliability and availability analysis is conducted which only considered machine failures, and the results of both analyses are compared.     

Supply chain network design using an integrated neuro-fuzzy and MILP approach: A comparative design study

In this study, an integrated supply chain (SC) design model is developed and a SC network design case is examined for a reputable multinational company in alcohol free beverage sector. Here, a three echelon SC network is considered under demand uncertainty and the proposed integrated neuro-fuzzy and mixed integer linear programming (MILP) approach is applied to this network to realize the design effectively. Matlab 7.0 is used for neuro-fuzzy demand forecasting and, the MILP model is solved using Lingo 10.0. Then Matlab 7.0 is used for artificial neural network (ANN) simulation to supply a comparative study and to show the applicability and efficiency of ANN simulation for this type of problem. By evaluating the output data, the SC network for this case is designed, and the optimal product flow between the factories, warehouses and distributors are calculated. Also it is proved that the ANN simulation can be used instead of analytical computations because of ensuring a simplified representation for this method and time saving.     

Multisecret-sharing schemes and bounded distance decoding of linear codes

Error-correcting codes are used to correct errors when messages are transmitted through a noisy communication channel. Bounded distance decoding (i.e. decoding up to the error-correcting capacity) is a method of correcting errors that guarantees unique decoding. Secret sharing is a cryptographic protocol that allows a secret known from a person called the dealer to be distributed to n participants. No single participant knows the secret but some special subsets of participants called coalitions can. In this paper, we present a multisecret-sharing scheme based on an error-correcting code where secret reconstruction is made by using bounded distance decoding of the code. This scheme is ideal in the sense that the size of each secret equals the size of any share. Its security improves on that of multisecret-sharing schemes.     

Inhomogeneities in poly(acrylamide) gels: position-dependent elastic modulus measurements

Summary The inhomogeneities in poly(acrylamide) (PAAm) gels and the formation mechanism of inhomogeneities were investigated using the results obtained by the mechanical measurements. The gels in the form of rods of 5.6 mm in diameter were prepared at various crosslinker (N,N'-methylene(bis)acrylamide) content. The initial monomer concentration was set to 5.1 w/v %. The results show that the elastic modulus of PAAm gels varies depending on the location, at which the mechanical measurements are carried out. The modulus increases with increasing distance from the bottom of the gel rod. The extent of modulus variation along the gel increases with increasing crosslinker content from 2.6 to 9 % BAAm. Received: 23 January 2001/Revised version: 17 May 2001/Accepted: 17 May 2001     

Magnetic Properties of Zn1?x Ni x O (0.25≤x≤ 0.50) Prepared by Solid-State Reactions

In this study the origin of ferromagnetism in ZnO-based bulk systems has been investigated using Ni-doped ZnO samples, Zn_1−x Ni _x O with 0.25≤x≤0.50, prepared by solid-state reactions. The structural characterizations indicated that the Ni²⁺ ions almost uniformly distributed in all the samples, and the samples have hexagonal wurtzite structure; however, when x is increased toward 0.50, a new NiO phase is formed. A ferromagnetism (FM) has been observed for all the samples at and below the room temperature. In other words, the room temperature results of (M–H) curves show that the FM observed is intrinsic for all the Ni-doped ZnO samples. However, the saturated magnetizations decrease gradually with increasing Ni concentration. This indicates that, in addition to FM, the excessive doping of Ni in ZnO also causes an antiferromagnetic (AFM) contribution which increases with increasing Ni amount. This result is also supported by the magnetization against temperature measurements. Furthermore, the trend of the ac-susceptibility (χ) versus temperature curves, measured under an ac-magnetic field of 100 Oe, also support our conclusion about the antiferromagnetic contribution to ferromagnetism in our samples.     

Tensile Bond Strength of a Highly Cross-Linked Denture Tooth to the Compression-Molded and Injection-Molded Denture Base Polymers

This study compared tensile bond strengths between conventional compression-molded heat (HC)-, auto (AP)-, and microwave-polymerized (MC) poly(methyl methacrylate)-based denture resins and a relatively new injection-molded, microwave-polymerized polyurethane based resin (MI) bonded to a highly cross-linked denture tooth. In the first part of the experiments, denture teeth were used as received. In the second part, they were treated with dichloromethane to see its effect on bonding of conventional denture bases (HCS and APS). Bond strength was tested in tension according to ADA specification No.15. The results showed that the HC group failed cohesively because of higher interface bonding (49.95 MPa) compared with those of the others (AP: 25.41 MPa; MC: 22.06 MPa; MI: 20.02 MPa). The application of dichloromethane improved bond strengths of HCS and APS groups (60.61 and 32.03 MPa, respectively). It was suggested that dichloromethane could be applied on the denture teeth ridge lap area prior to denture base processing to enhance adhesion between the tooth/resin.     

Determination of carnosic acid and rosmarinic acid in sage by capillary electrophoresis

A simple and rapid capillary electrophoresis method was developed for the identification and quantitative determination of two antioxidative compounds – carnosic acid and rosmarinic acid – in the extracts of commercial Sage (Salvia officinalis) tea-bags. Capillary zone electrophoretic separation of carnosic and rosmarinic acids was performed using 40 mmol/l borate, at pH 9.6 as the running buffer. Weighed sage samples were extracted from tea-bags by sonification and the extracts were directly injected without any purification and pre-separation process. Coumarin was used as internal standard for quantitation and the limits of detection for carnosic acid and rosmarinic acid were obtained as 2.79 and 3.18 μg/ml, respectively using UV detection at 210 nm.     

Microelectromechanical System for Controlling Flow Past an Airfoil: Pressure Transducers

A technology is developed for making single-chip diaphragm pressure sensors with polycrystalline-silicon piezoresistive elements on a monocrystalline-silicon substrate. It allows one to produce piezoresistive elements with a conductivity–temperature characteristic that neutralizes the temperature dependence of piezoresistive sensitivity. Sensors with a 1.8 × 1.8-mm² diaphragm are designed and fabricated by the above technology for pressures ranging from 1 to 10⁵ Pa, showing a maximum sensitivity of 10^–6 Pa^–1. The sensors are tested in aerodynamic experiments on monitoring the flow past a model wing of finite span at angles of attack close to the stall angle.