Kinetic,thermodynamic parameters and in vitro digestion of tannase from Aspergillus tamarii URM 7115

Tannase is an enzyme used in various industries and produced by a large number of microorganisms. The aim of this study was to evaluate tannase production to determine the biochemical, kinetic, and thermodynamic properties and to simulate tannase in vitro digestion. The tannase-producing fungal strain was isolated from “jamun” leaves and identified as Aspergillus tamarii. Temperature at 26°C for 67?h was the best combination for maximum tannase activity (6.35-fold; initial activity in Plackett–Burman design—15.53?U/mL and average final activity in Doehlert design—98.68?U/mL). The crude extract of tannase was optimally active at 40°C, pH 5.5 and 6.5. Moreover, tannase was stimulated by Na⁺, Ca²⁺, Mg²⁺, and Mn²⁺. The half-life at 40°C lasted 247.55?min. The free energy of Gibbs, enthalpy, and entropy, at 40°C, was 81.47, 16.85, and ?0.21?kJ/mol?·?K, respectively. After total digestion, 123.95% of the original activity was retained. Results suggested that tannase from A. tamarii URM 7115 is an enzyme of interest for industrial applications, such as gallic acid production, additive for feed industry, and for beverage manufacturing, due to its catalytic and thermodynamic properties.     

Effect of the reaction conditions on the properties of poly(4,4′-diphenylether-1,3,4-oxadiazole)s

Summary Poly(4,4-diphenylether-1,3,4-oxadiazole)s have been prepared by polycondensation of 4,4-diphenylether dicarboxylic acid and hydrazine sulphate, HS, in poly(phosphoric acid), PPA, under different reaction condictions. The products were characterized by viscometry, gel permeation chromatography, ¹H-NMR spectrometry and thermogravimetric analysis. Dense membranes have been prepared and submitted to gas transport and wide angle X-ray diffraction, WAXD, experiments. The differences found in permeability and selectivity parameters, as well as in density and WAXD results, are discussed in terms of their solution viscosities and hydrazide repeat unit contents.     

Organized knowledge sharing with book-centered Web sites: An architecture, implementation and analysis

For educators, the World Wide Web offers a valuable technology for knowledge sharing. It can complement more traditional approaches to knowledge sharing such as books and lectures. Here, we identify and differentiate three major approaches for Web-based knowledge sharing: course-centered sites, subject-centered sites, and book-centered sites. A rationale for book-centered sites, those developed to facilitate students’ and instructors’ efforts in courses that use the book, is advanced. We introduce an architecture of features that can guide developers of such sites. This is illustrated by a book-centered site implemented according to the architecture. Several sites for introductory business computing books are compared and contrasted in terms of the architecture, suggesting ways in which each can be extended. This revised version was published online in July 2006 with corrections to the Cover Date.     

The removal and degradation of pharmaceutical compounds during membrane bioreactor treatment

Pharmaceutical compounds such as non-steroidal anti-inflammatory drugs (NSAIDs) and antibiotics have been detected in sewage treatment plant (STP) effluents, surface and ground water and even in drinking water all over the world, and therefore have developed as compounds of concern. Membrane bioreactor (MBR) treatment has gained significant popularity as an advanced wastewater treatment technology and might be effective for an advanced removal of these pollutants. This paper evaluates the treatment of wastewater containing three NSAIDs (acetaminophen, ketoprofen and naproxen) and three antibiotics (roxithromycin, sulfamethoxazole and trimethoprim) performed in two MBRs with sludge retention times (SRTs) of 15 (MBR-15) and 30 (MBR-30) days over a period of four weeks. It was observed that NSAIDs were removed with higher efficiencies than the antibiotics for both MBRs, and the MBR-30 presented higher removal efficiencies for all the compounds than obtained by MBR-15. Removal rates ranged from 55% (sulfamethoxazole) up to 100% (acetaminophen, ketoprofen). Besides mineralisation biological transformation products of ketoprofen and naproxen produced by wastewater biocoenosis were identified in both MBR permeates using liquid chromatography coupled with mass spectrometry (LC-MS). The results indicated the importance of investigating the environmental fate of pharmaceuticals and their transformation products reaching the environment.     

Bond Between Near-Surface Mounted Carbon-Fiber-Reinforced Polymer Laminate Strips and Concrete

In recent years, a strengthening technique based on near-surface mounted (NSM) laminate strips of carbon-fiber-reinforced polymer (CFRP) has been used to increase the load-carrying capacity of concrete and masonry structures by introducing laminate strips into precut grooves on the concrete cover of the elements to be strengthened. The high experimentally derived levels of strength efficacy with concrete columns, beams, and masonry panels have presented NSM as a viable and promising technique. This practice requires no surface preparation work and, after cutting the groove, requires minimal installation time compared to the externally bonded reinforcing technique. A further advantage associated with NSM CFRP is its ability to significantly reduce the probability of harm resulting from fire, acts of vandalism, mechanical damage, and aging effects. To assess the bond behavior of CFRP to concrete, pullout-bending tests have been carried out. The influences of bond length and concrete strength on bond behavior are analyzed, the tests are described, and the results are presented and discussed in detail. Finally, a local stress-slip relationship is determined based on both experimental results and a numerical strategy.     

Extrusion process enhances the anti-inflammatory effect of Acanthopanax senticosus leaves

The anti-inflammatory effects of Acanthopanax senticosus leaves (ASL) and the effects of extrusion were evaluated. ASL exhibited in vitro and in vivo antiinflammatory activities in experimental systems. Extrusion increased the effect of ASL. ASL reduced C48/80-induced histamine release from HMC-1 cells as well as in vivo model, suggesting that ASL induces mast cell stabilization and has an anti-histamine activity. The effects of ASL and extruded ASL (ASLE) on pro-inflammatory cytokine production were evaluated. ASL treatment reduced MCP- 1, TNF-α, and IL-1β mRNA expressions and decreased their protein levels in HMC-1 cells. Decreases in serum NO, MDA, and TNF-α levels were observed in acute inflammatory rats, and extrusion increased the effects of ASL in a dose-dependent manner. These data support pharmacological basis of ASL and the effect of extrusion for future treatment of inflammation.     

Metformin Reduces Lipogenesis Markers in Obese Mice Fed a Low-Carbohydrate and High-Fat Diet

Lipogenesis is the process by which fatty acids are synthesized. In metabolic syndrome, an insulin resistant state along with high plasma levels of free fatty acids (FFA) and hyperglycemia may contribute to the lipogenic process. The aim of the present study was to investigate the effects of oral administration of metformin on the expression of lipogenic genes and glycemic profile in mice fed with low‐carbohydrate high‐fat diet by evaluating their metabolic profile. SWISS male mice were divided into 4 groups (N = 7) that were fed with standard (ST), standard plus metformin (ST + MET), low‐carbohydrate high‐fat diet (LCHFD) and low‐carbohydrate high‐fat diet plus metformin (LCHFD + MET) (100 mg kg^?1 diet) diets respectively. Food intake, body weight and blood parameters, such as glucose tolerance, insulin sensitivity, glucose, HDL‐c, total cholesterol, triglycerides, ASL and ALT levels were assessed. Histological analyses were performed on hematoxylin and eosin‐stained epididymal adipose tissue histological specimens. The expression levels of peroxisome proliferator‐activated receptor (PPARγ), sterol regulatory element‐binding protein 1 (SREBP1), fatty acid synthase (FAS) and acetyl‐CoA carboxylase (ACC), were assessed by RT‐PCR. This study showed that metformin decreased adipocyte area, body weight and food consumption in obese animals when compared to the standard group. Furthermore, the expression of lipogenic markers in adipose tissue were diminished in obese animals treated with metformin. This data showed that oral administration of metformin improved glucose and lipid metabolic parameters in white adipose tissue by reducing the expression of lipogenesis markers, suggesting an important clinical application of MET in treating obesity‐related diseases in metabolic syndrome.     

Application of multi-way models to the time-resolved fluorescence of polycyclic aromatic hydrocarbons mixtures in water

The time-resolved laser-induced fluorescence of a series of polycyclic aromatic compounds (PAHs) and mixtures of these latter in aqueous solution was measured by means of an apparatus equipped with optical fibers, which allows their real time in situ monitoring. The potential of such spectroscopic technique, yielding 4-way fluorescence data arrays, together with the application of multi-way models to the matricized data, was tested for the resolution of complex aqueous mixtures containing low concentrations of PAHs, as typical fluorescent pollutants in aquatic systems. PARAllel FACtors analysis was employed for the qualitative resolution of PAHs mixtures and for calculating the fluorescence lifetimes of single PAHs; n-way partial least squares analysis was applied for evaluating the concentration of the single PAHs in the aqueous mixtures.     

A HYBRID SIMULATED ANNEALING ALGORITHM FOR SOLVING MULTI-OBJECTIVE CONTAINER-LOADING PROBLEMS

In this article, we explored a new approach to solution of multi-objective container-loading problems mostly encountered in transportation and wholesaling industries. Our goal is to load the items (boxes) that would provide the highest total weight to the container in the best possible way. These two objectives (weight maximization and volume utilization) are conflicting because the volume of a box is usually not proportional to its weight. A weighted goal programming model is formulated and presented. A simulated annealing (SA) algorithm accompanied by a heuristic filling procedure is then proposed to solve the model. The proposed algorithm has been first tested on a set of benchmark problems available in the literature and then used for real-world data provided by a distribution company. The computational results have validated significance and usefulness of the proposed approach.     

Determination of optimum hazelnut roasting conditions

The objective of this study was to test the hypothesis that the roasting conditions used for hazelnuts, such as the air temperature, air velocity and roasting time (independent variables), could be optimized by using Response Surface Methodology. Effects of independent variables on sensory and physical characteristics were determined. A consumer test was used to determine the acceptable samples. Very dark and very light roasted samples, corresponding to 165 °C, 3 m/s, 25 min and 125 °C, 1 m/s, 15 min process conditions, respectively, were unacceptable. Superimposed contour plots were used to determine the values of independent variables and these showed the process conditions where all product characteristics were acceptable to consumers. At low velocity (0.3 m/s), acceptable products were produced at about 165–179 °C for 20–25 min. When air velocity increased, air temperature shifted to lower temperatures. Samples roasted at 145 °C, 2 m/s, 28 min, 165 °C, 1 m/s, 25 min and 145 °C, 3.7 m/s, 20 min produced the most acceptable products. The sample roasted at 165 °C, 1 m/s, 25 min required the least air velocity and was the most economical in terms of energy consumed among the samples rated most acceptable by consumers.