Synthesis,characterization and magnetic properties of polythiophene/SrFe12-x(ZrZn)0.5xO19 nanocomposite as a microwave absorber

Ferrites are an important group of magnetic materials which are used as absorbers. The incorporation of ferrite and conducting polymer achieves great enhancement in microwave absorption properties. The nanocomposites of hexagonal ferrites embedded by conducting polymers such as polypyrrole, polyaniline and polythiophene (PTH) have been paid much attention. In the present study, strontium hexagonal ferrite doped by Zr and Zn with the final formula of SrFe_12-x(ZrZn)_0.5xO19 considering x = 0.9 and embedded by PTH was produced to achieve a nanocomposite with the highest microwave absorbing ability. In this study, after synthesis of SrFe₁₂O₁₉(ZrZn)_0.5xO19 and PTH, the nanocomposite was prepared by in situ polymerization. Wrapping the ferrite particles and PTH chains could form nanocomposite properly, and therefore acceptable interactions were observable between SrFe_12-x(ZrZn)_0.5xO19ferrite particles and PTH polymer chains in the composites. Assessing the X-ray diffraction (XRD) patterns of SrFe_12-x(ZrZn)_0.5xO19, PTH, and PTH/SrFe_12-x(ZrZn)_0.5xO19 nanocomposite indicated that the PTH characteristic peak shifts slightly and its peak intensity reduces, which may be attribute to the coating of PTH polymer chains onto SrFe_12-x(ZrZn)_0.5xO19 particles. We revealed also lower magnetic properties in the obtained nanocomposite. The morphological assessment also suggested that PTH could effectively coat the SrFe_12-x(ZrZn)_0.5xO19 particles. The synergistic effect of SrFe_12-x(ZrZn)_0.5xO19 particle plus PTH leads to microwave absorption percentage higher than 95% by PTH/SrFe_12-x(ZrZn)_0.5xO19 nanocomposite. Overall, nanocomposite creating by coupling interaction between SrFe_12-x(ZrZn)_0.5xO19 particles (x = 0.9) and PTH can effectively lead to achieve the highest rate of absorption of electromagnetic waves.     

Preparation and properties of silicone‐containing poly(methyl methacrylate) gels

Poly(methyl methacrylate) (PMMA) gels with varying amounts of silicone and solvent and constant amounts of crosslinker were prepared by solution free radical crosslinking copolymerization of methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDM), tetraethoxysilane (TEOS) and vinyltriethoxysilane (VTES) comonomer systems. They were then studied in benzene at a total monomer concentration of 3.5 mol L^?1 and 70 °C. The conversion of monomer, volume swelling ratio, weight fraction and gel point were measured as a function of the reaction time, silicone concentration and benzene content up to the onset of macrogelation. Structural characteristics of the gels were examined by using equilibrium swelling in benzene, gel fraction and Fourier‐transform infrared (FTIR) analysis. The morphology of the copolymers was also investigated by SEM. Based on the obtained results, it was concluded that the FTIR data did not have the capacity to show the presence of the VTES or TEOS moiety in these kinds of copolymers. On the other hand, the variation of weight fraction of gel, W_g, and its equilibrium volume swelling ratio in benzene, q_v, exhibited the same behaviour as that of MMA/EGDM copolymers. Also, the dilution of the monomer mixture resulted in an increase in the gel point and swelling degree and a decrease in the percent of conversion and gel fraction. Finally, TEOS is not an ideal silicone compound for reaction in the MMA/EGDM copolymerization system, whereas VTES is a suitable silicone comonomer for this system and it has been proved useful. Copyright © 2005 Society of Chemical Industry     

A novel ACO–GA hybrid algorithm for feature selection in protein function prediction

Protein function prediction is an important problem in functional genomics. Typically, protein sequences are represented by feature vectors. A major problem of protein datasets that increase the complexity of classification models is their large number of features. Feature selection (FS) techniques are used to deal with this high dimensional space of features. In this paper, we propose a novel feature selection algorithm that combines genetic algorithms (GA) and ant colony optimization (ACO) for faster and better search capability. The hybrid algorithm makes use of advantages of both ACO and GA methods. Proposed algorithm is easily implemented and because of use of a simple classifier in that, its computational complexity is very low. The performance of proposed algorithm is compared to the performance of two prominent population-based algorithms, ACO and genetic algorithms. Experimentation is carried out using two challenging biological datasets, involving the hierarchical functional classification of GPCRs and enzymes. The criteria used for comparison are maximizing predictive accuracy, and finding the smallest subset of features. The results of experiments indicate the superiority of proposed algorithm.     

Synthesis and characterization of multiwall carbon nanotube/waterborne polyurethane nanocomposites

The preparation of thermoplastic nanocomposites of waterborne polyurethane (WBPU) and multiwall carbon nanotubes (MWCNTs) via an in situ polymerization approach is presented. The effects of the presence and content of MWCNTs on the morphology and thermal, mechanical and electrical properties of the nanocomposites were investigated. Carbon nanotubes were modified with amide groups in order to enhance their chemical affinity towards WBPU. Thermogravimetric studies show enhanced thermal stability of the nanocomposites. Scanning and transmission electronic microscopy images prove that functionalized carbon nanotubes can be effectively dispersed in WBPU matrix. Mechanical properties reveal that Young's modulus and tensile strength tend to increase when appropriate amounts of MWCNTs are loaded due to the reinforcing effect of the functionalized carbon nanotubes. Thermal properties show an increase in the glass transition temperature and storage modulus with an increase in MWCNT content. X‐ray diffraction reveals better crystallization of the WBPU in the presence of MWCNTs. The WBPU/MWCNT nanocomposite film containing 1 wt% of MWCNTs exhibits a conductivity nearly five orders of magnitude higher than that of WBPU film. © 2017 Society of Chemical Industry     

Attitude of Iranian physicians and nurses toward a clinical decision support system for pulmonary embolism and deep vein thrombosis

This research project sought to design and implement a computerized clinical decision support system (CDSS) that was able to identify patients who were at risk of pulmonary embolism (PE) and deep vein thrombosis (DVT), as well as produce reminders for prophylactic action for these diseases. The main purpose of the CDSS was to attempt to reduce the morbidity and mortality caused by embolism and thrombosis in patients admitted to hospitals. After implementation of this system in one of the large educational hospitals of Iran, a standard questionnaire was used, and interviews were conducted with physicians and nurses to evaluate the performance of the designed system for reducing the incidence of pulmonary embolism and thrombosis. From physicians and nurses’ point of view, a system which assists the medical staff in making better decisions regarding patient care, and also reminds pulmonary embolism and thrombosis preventive procedures with timely warnings, can influence patient care quality improvement and lead to the improved performance of the medical staff in preventing the incidence of pulmonary embolism and thrombosis.     

Investigation of Hydrodynamics of High‐Temperature Fluidized Beds by Pressure Fluctuations

Hydrodynamics of a gas‐solid fluidized bed at elevated temperatures was investigated by analyzing pressure fluctuations in time and frequency domains. Sand particles were fluidized with air at various bed temperatures. At a constant gas velocity, the standard deviation, power spectrum density function, and wide‐band energy of pressure fluctuations reach a maximum at 300 °C. Increasing the temperature to this value causes larger bubble sizes and after the bubbles reach their maximum size, they break into smaller bubbles. The Archimedes number decreases with higher temperature and the type of fluidization becomes closer to that of Geldart A boundary at this maximum temperature. Based on estimation of the drag force acting on the emulsion phase, it was concluded that 300 °C was a transition temperature at which the drag force reaches a minimum due to a significant change of interparticle and hydrodynamic forces.     

Controlled release of fluorouracil (5-FU) from chitosan-co-poly(ethylene glycol)/ poly(glycerol sebacate)-co-poly(ethylene glycol)-coated iron oxide

A blend of polyglycerol sebacate-poly ethylene glygol/chitosan-poly ethylene glycol-coated iron oxide (PGS-PEG/CS-PEG@Fe₃O₄) nanoparticles for 5FU delivery was prepared by reverse ultrasonic emulsification method. To enhance polymers’ solubility, PEG was grafted. Chemical characterization was performed through Fourier transformed infrared and proton nuclear magnetic resonance spectra. In vitro assay revealed that release profile of 5FU-loaded PGS-PEG/CS-PEG@Fe₃O₄ is sustained. Moreover, cytotoxicity was analyzed on HT29 cell line at the presence of external magnetic field using the lactate dehydrogenase and Alamar Blue. Results illustrate that (PGS-PEG/CS-PEG@Fe₃O₄) is promising to use as a carrier for 5FU anticancer agent with sustained tailored release.     

Microparticles containing erlotinib-loaded solid lipid nanoparticles for treatment of non-small cell lung cancer

Non-small cell lung cancer (NSCLC) patients with sensitizing mutations in the exons 18–21 of the epithelial growth factor receptor (EGFR) gene show increased kinase activity of EGFR. Hence, tyrosine kinase inhibitors (TKIs) such as erlotinib (ETB) have commonly been used as the second line therapeutic option for the treatment of metastatic NSCLC. While the ETB is available as an oral dosage form, the local delivery of this TKI to the diseased cells of the lung may ameliorate its therapeutic impacts. In the current study, we report on the development of ETB-loaded solid lipid nanoparticle (SLN) based formulation of dry powder inhaler (ETB-SLN DPI). ETB-SLNs were formulated using designated amount of compritol/poloxamer 407. The engineered ETB-SLNs showed sub-100?nm spherical shape with an encapsulation efficiency of 78.21%. MTT assay and DAPI staining revealed that the ETB-SLNs enhanced the cytotoxicity of cargo drug molecules in the human alveolar adenocarcinoma epithelial A549 cells as a model for NSCLC. To attain the ETB-SLN DPI, the ETB-SLNs were efficiently spray dried into microparticles (1–5?μm) along with mannitol. The ETB-SLN DPI powder displayed suitable flowability and aerodynamic traits. The Carr's Index, Hausner ratio and Next Generation Impactor (NGI) analyses confirmed deep inhalation pattern of the formulation. Based on these findings, we propose the ETB-SLN DPI as a promising treatment modality for the NSCLC patients.