Beneficial effects of wettability altering surfactants in oil-wet fractured reservoirs

In fractured reservoirs, an effective matrix-fracture mass transfer is required for oil recovery. Surfactants have long been considered for oil recovery enhancement, mainly in terms of their ability to reduce oil–water interfacial tension. These surfactants are effective when the fractured formations are water-wet, where capillary imbibition of surfactants from the fracture into the matrix contributes to oil recovery. However, another beneficial aspect of surfactants, namely their ability to alter wettability, remains to be explored and exploited. Surfactants capable of altering wettability can be especially beneficial in oil-wet fractured formations, where the surfactant in the fracture diffuses into the matrix and alters the wettability, enabling imbibition of even more surfactant into the matrix. This sequential process of initial diffusion followed by imbibition continues well into the matrix yielding significant enhancements in oil recovery.In order to test this hypothesis of sequential diffusion–imbibition phenomenon, Dual-Drop Dual-Crystal (DDDC) contact angle experiments have been conducted using fractured Yates dolomite reservoir fluids, two types of surfactants (nonionic and anionic) and dolomite rock substrates. A new experimental procedure was developed in which crude oil equilibrated with reservoir brine has been exposed to surfactant to simulate the matrix-fracture interactions in fractured reservoirs. This procedure enables the measurements of dynamic contact angles and oil–water interfacial tensions, in addition to providing the visual observations of the dynamic behavior of crude oil trapped in the rock matrix as it encounters the diffusing surfactant from the fractures. Both the measurements and visual observations indicate wettability alterations of the matrix surface from oil-wet to less oil-wet or intermediate wet by the surfactants. Thus this study is of practical importance to oil-wet fractured formations where surfactant-induced wettability alterations can result in significant oil recovery enhancements. In addition, this study has also identified the need to include contact angle term in the dimensionless Bond number formulations for better quantitative interpretation of rock–fluids interactions.     

Adaptive Spatial Partitioning for Multidimensional Data Streams

We propose a space-efficient scheme for summarizing multidimensional data streams. Our sketch can be used to solve spatial versions of several classical data stream queries efficiently. For instance, we can track ε-hot spots, which are congruent boxes containing at least an ε fraction of the stream, and maintain hierarchical heavy hitters in d dimensions. Our sketch can also be viewed as a multidimensional generalization of the ε-approximate quantile summary. The space complexity of our scheme is O((1/ε) log R) if the points lie in the domain [0, R]^d, where d is assumed to be a constant. The scheme extends to the sliding window model with a log (ε n) factor increase in space, where n is the size of the sliding window. Our sketch can also be used to answer ε-approximate rectangular range queries over a stream of d-dimensional points.     

Bayesian and Dempster-Shafer fusion

The Kalman Filter is traditionally viewed as a prediction-correction filtering algorithm. In this work we show that it can be viewed as a Bayesian fusion algorithm and derive it using Bayesian arguments. We begin with an outline of Bayes theory, using it to discuss well-known quantities such as priors, likelihood and posteriors, and we provide the basic Bayesian fusion equation. We derive the Kalman Filter from this equation using a novel method to evaluate the Chapman-Kolmogorov prediction integral. We then use the theory to fuse data from multiple sensors. Vying with this approach is the Dempster-Shafer theory, which deals with measures of “belief”, and is based on the nonclassical idea of “mass” as opposed to probability. Although these two measures look very similar, there are some differences. We point them out through outlining the ideas of the Dempster-Shafer theory and presenting the basic Dempster-Shafer fusion equation. Finally we compare the two methods, and discuss the relative merits and demerits using an illustrative example.     

A Web‐based and Group Learning Environment for Introductory Environmental Engineering

The use of computer‐based technology is becoming more prevalent in the classroom. As a part of an educational research project sponsored by the GE Foundation, strategies for augmenting a course, Introduction to Environmental Engineering (CE 280), were investigated including cross‐disciplinary experiences in teamwork, design, and the use of advanced teaching technologies such as the web. Interactive tools to assist student learning were developed and refined. Efforts have focused on developing an extensive website, web‐based quizzes and homework assignments, and tutorials. Base groups were used to provide both intellectual and emotional support to students. This paper summarizes the development of this course and the impact of rapid feedback on the progression of student understanding.     

Effect of praseodymium substitution on the growth and properties of Y1−x Pr x Ba2Cu3O7−δ (o <x < 0·4) single crystals

In the present paper, a modified self-flux technique has been successfully employed for the growth of pure and praseodymium substituted (partially) large single crystals of high temperature superconducting Y_1−x Pr _x Ba₂Cu₃O_7−δ (x = 0·0,0·2,0·4). Typical sizes of the platy and bulky crystals of pure YBCO(123) material are ≈ 2 × 2 × 0·1 mm³ and 4 × 1 × 1 mm³, respectively. In case of Pr-substitution, the typical sizes of platy and bulky crystals of Y_0·8Pr_0·2Ba₂Cu₃O_7−δ and Y_0·6Pr_0·4Ba₂Cu₃O_7−δ materials are ≈ 2 × 3 × 0·1 mm³ and 5 × 1 × 1 mm³ and ≈ 1 × 1·5 × 0·1 mm³ and 7 × 0·2 × 0·1 mm³, respectively. The morphology and growth habit of the as-grown single crystals and the critical transition temperature (T _c) of the oxygenated crystals were found to depend on the Pr-content. Paper presented at the poster session of MRSI AGM VI, Kharagpur, 1995     

The pyrolysis of a Wyoming coal in different nonreactive atmospheres

This study investigated how differing nonreactive atmospheres affected the properties of chars produced by coal pyrolysis. Samples of a Wyoming subbituminous coal were first heated at 586°C in helium for 6 hr. They were then heated for another 6 hr at 300°C higher in helium, argon or nitrogen. Weight losses in the chars during the second step were apparently unaffected by the choice of inert environment. Surface characteristics, pore structures, and reactivities of the resulting chars were, however, significantly different as shown by the results of scanning electron microscopy, nitrogen adsorption, carbon dioxide adsorption, and reactivity of the chars in carbon dioxide. Smoothness of the surface, adsorption capacities, N₂ and CO₂ surface areas, and reactivity during gasification all decreased in the direction (in order of inert atmospheres employed) He >Ar >N₂. In addition, there were strong indications that trace contaminants in the inert gases could alter the characteristics of the resulting char markedly.     

Multiple melting in blends of poly(vinylidene fluoride) with isotactic poly(ethyl methacrylate)

Multiple melting phenomena have been studied in blends of poly(vinylidene fluoride) (PVF₂) with low molar mass isotactic poly(ethyl methacrylate) (it-PEMA). In all blends, as well as in pure PVF₂, a transition (T₁) was observed prior to the main melting point (T₂). T₁ is probably connected with the melting of secondarily-crystallized material. In addition to this, a high temperature melting endotherm (T₃) was observed, which could be ascribed completely to recrystallization of PVF₂. The highest transition (T₄) was caused by melting of the σ form of PVF₂. From Hoffman-Weeks plots—T₂ vs. crystallization temperature, T_c — it could be concluded that no thermody amic depression of the melting point of PVF₂ occurred in the blends. The stabilities of PVF₂ crystallites in the various blends were derived from the slopes of Hoffman-Weeks plots and were in good agreement with lamellar thicknesses found from SAXS measurements.     

Comparative Experimental Measurements of Viscosity-Temperature Relations of an Oxide and Slightly Nitrided Glasses

Viscosity-temperature profiles were experimentally measured by the rotating spindle technique for oxide and oxy nitride glassmelts from =800° to 1200° C. Nitriding of the oxide glassmelts increases the viscosity over the temperature range studied.     

Minimizing conditional-value-at-risk for stochastic scheduling problems

This paper introduces the use of conditional-value-at-risk (CVaR) as a criterion for stochastic scheduling problems. This criterion has the tendency of simultaneously reducing both the expectation and variance of a performance measure, while retaining linearity whenever the expectation can be represented by a linear expression. In this regard, it offers an added advantage over traditional nonlinear expectation-variance-based approaches. We begin by formulating a scenario-based mixed-integer program formulation for minimizing CVaR for general scheduling problems. We then demonstrate its application for the single machine total weighted tardiness problem, for which we present both a specialized l-shaped algorithm and a dynamic programming-based heuristic procedure. Our numerical experimental results reveal the benefits and effectiveness of using the CVaR criterion. Likewise, we also exhibit the use and effectiveness of minimizing CVaR in the context of the parallel machine total weighted tardiness problem. We believe that minimizing CVaR is an effective approach and holds great promise for achieving risk-averse solutions for stochastic scheduling problems that arise in diverse practical applications.