Repeatedly foldable AMOLED display

In this study, a 5.9‐inch foldable active‐matrix organic light emitting diode (AMOLED) display was developed. A folding test was performed repeatedly. The display survived the folding test (100,000 folds) with a curvature radius of 2 mm. To protect an organic light emitting diode (OLED) against moisture, inorganic passivation layers are provided on the upper and lower sides of the flexible display. Using our transfer technology, high density passivation layers can be obtained. The measured water vapor transmission rate of the layer is 7 × 10^?6 g/m²?day or less, which improves OLED reliability. With these techniques, we have developed a book‐type display, which is repeatedly foldable like a book, and a tri‐fold display including a display area, which is foldable in three.     

Performance Comparison of Circuits for Pole‐Mounted STATCOM Using SiC Devices

The recent years have seen an increasing trend in the cumulative installed capacity of distributed generators. As a result, voltage management may become difficult in existing power distribution systems in the future. A STATCOM (STAtic synchronous COMpensator) is a promising option for solving this problem because it can control reactive power rapidly and continuously. For a distribution system, STATCOM needs to be pole‐mounted to realize its low cost. However, a transformer for a STATCOM is large and heavy, and hence it is difficult to install a STATCOM on a distribution pole. We adopt a transformerless STATCOM to reduce STATCOM size and use SiC devices with low‐loss performance to obtain a more compact and efficient STATCOM. There are a large number of circuits available for a STATCOM, and there has been considerable research on performance comparisons among these circuits. However, these comparisons were drawn under different conditions, including switching frequency and level number for the circuits. In addition, these comparisons do not include the use of SiC devices. We made an equitable comparison for a 100 kVa pole‐mounted STATCOM using SiC devices. We discuss the performance and characteristics of each circuit in terms of efficiency and volume.     

Observation of iron silicide formation by plan-view transmission electron microscopy

The formation and the phase transitions of iron silicide by solid-phase epitaxy have been investigated by means of plan-view transmission electron microscopy, which enables us to observe a clean interface between Fe and Si. Layers of Fe were deposited on Si (100) at room temperature in an ultrahigh vacuum chamber. The sample was annealed in the electron microscope at a temperature between 673 and 1073 K. After annealing at 673 K, FeSi crystallites were formed with various orientations. When the annealing temperature was increased to 973 K, we found that the crystallites suddenly started to coalesce into grains of several hundreds of nanometers in size and polycrystalline beta-FeSi2 was formed. These phase transitions were also confirmed with electron energy-loss spectroscopy.     

Investigation of gas-liquid interface in atmospheric-pressure micro plasma with solution

An atmospheric-pressure glow-discharge micro plasma in contact with liquid paraffin is stably generated by using a capacitively coupled plasma method with a mesh electrode. When characteristics of the plasma are measured in the boundary between the micro plasma (gas-phase) and liquid paraffin (liquid-phase) using optical emission spectroscopy, spectrum peaks of the emission of CH and C₂ which dissociate from paraffin are observed. The result indicates that solution can feed particles to the plasma at gas-liquid interface and this plasma is accordingly expected to promote an attractive plasma process for creating materials consisting of elements in various solutions.     

Polonium evaporation and adhesion experiments for the development of polonium filter in lead–bismuth cooled reactors

Fundamental experiments were performed to determine the adhesion characteristics of polonium to different metals and to develop a filter for polonium evaporated from neutron-irradiated LBE. The results of the first experiments suggested that adhesion characteristics are almost the same for stainless steel and nickel metal. The results of the preliminary experiments for a polonium filter suggested that stainless steel mesh with thin wires could effectively collect polonium evaporated from neutron-irradiated LBE. In the experiments, stainless steel wire mesh was used, but from the results of adhesion experiment, it is expected that the same effect can be obtained with wire mesh made of other kinds of metal.     

Two acyl-CoA dehydrogenases of Acinetobacter sp. strain M-1 that uses very long-chain n-alkanes

Two genes encoding acyl-CoA dehydrogenases, acdA and acdB, arranged in tandem, were found in the chromosomal DNA of Acinetobacter sp. strain M-1. AcdA was purified from the parental strain and AcdB was purified from an Escherichia coli strain expressing the cloned gene. The substrate specificities of the two enzymes suggest that AcdA is a medium-chain acyl-CoA dehydrogenase and that AcdB is a long-chain acyl-CoA dehydrogenase. Characterization of n-alkane metabolism in Acinetobacter sp. strain M-1 has revealed parallel pathways as well as enzymes with overlapping specificities in a single pathway. The two acyl-CoA dehydrogenases described here provide another example of the physiological complexity underlying n-alkane utilization.     

Polypyridyl Ru(II)-sensitizers with extended π-system enhances the performance of dye sensitized solar cells

New polypyridyl ruthenium(II) complexes “cis-Ru(4,4′-dimesityl-2,2′-bipyridine) (Ln) (NCS)₂ H102” and “cis-Ru(4,4′-bis(2,3,6-tri-isopropylphenyl)-2,2′-bipyridine) (Ln) (NCS)₂ H105”, where Ln = 4,4′-dicarboxylic acid-2,2′-bipyridine; were synthesized and successfully applied to sensitization of nano-crystalline TiO₂ based solar cells (DSSCs). The DSSCs of H102 and H105 fabricated from 0.16 cm² TiO₂ electrodes exhibited broader comparable photocurrent action spectra with almost identical solar-to-electrical energy conversion efficiency (η) as compared to N719 sensitizer. The incident photon-to-current conversion efficiency (IPCE) values of 98% and 95% were obtained for H102 and H105 sensitizers respectively. Under 1 sun condition, η-values of 8.39% (short-circuit photocurrent (J_SC) = 16.4 mA/cm², open-circuit photo voltage (V_OC) = 692 mV, fill factor = 0.734), 8.76% (J_SC = 16.3 mA/cm², V_OC = 735 mV, fill factor = 0.734) and 9.12% (J_SC = 16.1 mA/cm², V_OC = 745 mV, fill factor = 0.753) were obtained for H102, H105 and N719 sensitizers respectively.     

A general method for the chromatographic analysis of mono-, di-, and triglycerides and the mono- and diesters of ethylene glycol and polyethylene glycol

Summary A procedure for the chromatographic separation and determination of the ester mixtures of glycerin, ethylene glycol, and polyethylene glycol is presented. The adsorbent is silea gel, and the mobile phase is a series of solvents with increasing polarity. A procedure for quantitative determination of small amounts of monoglyceride present in a glyceryl ester mixture is presented. A solvent system different from that used for glyceryl and ethylene glycol ester mixtures was developed for ester mixtures of polyethylene glycols. The esters of polyethylene glycols with average molecular weights of 300–600 were shown to give the same chromatogram.     

Prediction of residual stresses and strains in cold-formed steel members

The objective of this paper is to provide an unambiguous mechanics-based prediction method for determination of initial residual stresses and effective plastic strains in cold-formed steel members. The method is founded on basic physical assumptions regarding plastic deformations and common industry practice in manufacturing. Sheet steel coiling and cross-section roll-forming are the manufacturing processes considered. The structural mechanics employed in the method are defined for each manufacturing stage and the end result is a series of closed-form algebraic equations for the prediction of residual stresses and strains. Prediction validity is evaluated with measured residual strains from existing experiments, and good agreement is shown. The primary motivation for the development of this method is to define the initial state of a cold-formed steel member for use in a subsequent nonlinear finite element analysis. The work also has impact on our present understanding of cold-work of forming effects in cold-formed steel members.