复混肥料中钾含量的测定

根据作者多年工作经验，详细介绍了复混肥料中钾合量的到定，且与标准GB／T8574—1988进行了逐一比较。     

定向棱镜腔平顶高斯激光束特性的研究

在XeCl准分子激光器中,采用定向棱镜作为端反射镜与平面输出镜构成激光器谐振腔,获得了近场能量分布均匀、远场能量分布高度集中的相干平顶高斯激光束输出,并具有腔镜高抗失调能力,改善了激光束质量。     

异喹啉的脉冲辐解和激光光解研究

用脉冲辐解和激光光解相结合,研究了异喹啉这种难降解杂环化合物在紫外光作用下的变化和与HO·的反应.结果表明,在波长为266nm的激光作用下,异喹啉不仅发生光激发,而且发生单光子电离,其量子产额为1.58×10-4.异喹啉光电离产生的阳离子自由基可以脱去质子,其pKa为5.50.异喹啉可以与HO·发生反应,其反应速率常数为3.4×109 mol-1·dm3·s-1.本工作的研究将为photo-Fenton法降解异喹啉提供理论上的依据.     

纳米聚N-异丙基丙烯酰胺微凝胶的光引发聚合

选择具有温敏性的高分子单体N－异丙基丙烯酰胺（N－isopropylacrylamide，NIPAM）为主单体，N，N′－亚甲基双丙烯酰胺（methylenebisacrylamide，MBA）为交联剂，运用光引发无皂乳液聚合的方法合成出粒径小于100nm的高分子微凝胶，并研究了在改变体系组成和条件时微凝胶粒径的变化。结果显示，在乳化剂临界胶束浓度以下，随着乳化剂浓度的提高，微凝胶粒子的粒径不断关小且趋向稳定；相比于热引发，产生的微凝胶具有较高的单分散性而且粒径较小。     

Design consideration of photocatalytic oxidation reactors using TiO2-coated foam nickels for degrading indoor gaseous formaldehyde

In the design process of the photocatalytic oxidation (PCO) reactor using TiO₂-coated foam nickels, the optimum of catalyst film thickness, light intensity and flow velocity were considered. A model was developed to study the effect of catalyst film thickness on photocatalytic degradation of formaldehyde by a TiO₂-coated foam nickel at continuous flow mode. In this model, external mass transfer and internal molecule diffusion-reaction were considered. A first-order kinetics equation was used to account for the photocatalytic reaction. Two exponential equations were employed to describe the distribution of light intensities in foam nickels and catalyst films, respectively. Validated with experimental data, the model can be used to predict the optimal thickness of catalyst films. A method for determining appropriate light intensities was proposed and discussed. The appropriate light intensity can be obtained by giving a margin, regarded as an excess coefficient, to the light intensity calculated based on the assumption of complete use of excited electron–hole pairs. The excess coefficient needs to be determined experimentally. In addition, the optimal flow velocity of PCO reactors could be consistent with the required one by changing the windward area of foam nickels. Based on the theoretical analyses, a novel PCO reactor containing 15 parallel-connected cells was designed. Each reaction cell was composed of an UV lamp and a TiO₂-coated tubular foam nickel. The performance of the reactor was tested by degrading gaseous formaldehyde at an indoor concentration level. The results showed that the reactor had low pressure loss and good degradation capability.     

燃料电池质子交换膜的研究进展

本文从质子交换膜的发展入手 ,指出全氟磺酸型质子交换膜是目前最适合燃料电池的膜材料 ,并对其结构特点及优缺点进行了重点分析 ,论述了目前质子交换膜的发展趋势     

用激光烧结法制备的SnO2薄膜的气敏性质

用溶胶-凝胶法制备SnO2前驱液,然后用提拉法分别在单晶Si和Al2O3基片表面制备出SnO2前驱膜,再用脉冲Nd:YAG激光烧结前驱膜使其转变为晶体SnO2薄膜.用XRD分析了单晶Si表面的SnO2薄膜,研究激光功率对SnO2薄膜相组成的影响.TEM观察表明,激光烧结后的薄膜SnO2颗粒均匀,直径约为10 nm.用激光烧结法制备的SnO2薄膜对浓度为1.80×10-4丙酮的最高灵敏度为30～40,明显高于用传统烧结法制备的SnO2薄膜的灵敏度.激光烧结能降低薄膜具有最高灵敏度的工作温度.     

微波辐射在提金活性炭技术中的应用

概述了微波辐射在提金活性发技术中的应用，将微波辐射和传统方法制备提金炭技术进行了比较，论述了微波辐射在制备提金炭及其解吸技术中的研究进展，最后对微波辐射在提金活性炭技术中的应用作了简单的展望。     

STATCOM与新型调相机的技术性和经济性比较

近年来电压稳定问题已经成为电网安全运行的一项重大挑战,新型调相机和STATCOM因其优异的电压支撑能力而受到越来越多的关注。本文首先简单介绍了新型调相机和STATCOM的基本原理和特性。接着,从应对系统电压跌落、电压骤升和对短路电流的影响3个方面对这两种无功补偿设备进行了技术性比较,根据比较结果从技术性角度给出了不同应用场景下无功补偿设备的选择建议。最后,文章采用等年值法对比了新型调相机和链式STATCOM的经济性,并从经济性角度给出了不同应用场景下无功补偿设备的选择建议。     

油-气管道检测机器人技术现状及展望

为提高油-气管道检测的效果,结合国内外典型管道机器人的特点,综合分析了管道机器人运动控制技术、定位技术和实时检测技术3个方面的现状,并指出了核心技术的不足;针对石油化工行业高温带压管道环境,提出管道检测机器人的研究重点为分层模糊神经网络运动控制技术、CCD视觉定位技术、低频电磁定位技术和分层图像分割的优化方法等。为进一步提高化工油-气管道内检测机器人的检测效果提供了理论依据。