Development of a novel image intensifier of an amplifiedmetal-oxide semiconductor imager overlaid with electron-bombardedamorphous silicon

We developed a novel image intensifier (II) of an amplified metal-oxide-semiconductor (MOS) imager (AMI) overlaid with electron-bombarded (EB) amorphous silicon (a-Si). The electron bombardment gain (EB gain) was 1500 at an accelerating voltage of 10 kV. Since the multiplication process was free from a phosphorescent screen and a coupling fiber plate as in the conventional II, the resolution was high and the picture quality was good and free from granularity noises, white spots, lag and sticking. As for fatigue of X-ray irradiation, the contrasts of a vertical stripe (Smear) are not detectable and damaged areas in AMI are weak whereas both of those in charge-coupled devices (CCDs) are strong     

Color registration error reduction method compensating the influence of belt thickness variation in electrophotographic process

This paper proposes a new belt drive control method for reducing a belt velocity-fluctuation that is caused by a belt thickness-variation in the circumferential direction. A belt driving system performs feedback control with a rotary encoder-output mounted on a driven roller. This proposed method correct the reference value of the feedback control for the purpose of the belt velocity regulation. The correction includes two steps. The first step acquires the encoder-output of the driven roller and calculates the rotational angular velocity-fluctuation with one cycle of the belt rotation. The second step converts from the velocity-fluctuation to the correction value of the feedback reference. The correction value cancels a detection error of the driven roller caused by the belt thickness-variation. After these steps, the belt driving system controls the belt velocity as compensating the belt velocity-fluctuation. Experimental result showed the significant fluctuation reduction on a typical tandem-engine printer.     

Development of an epileptic seizure prediction algorithm using R–R intervals with self-attentive autoencoder

Epilepsy is a neurological disorder that may affect the autonomic nervous system (ANS) from 15 to 20 min before seizure onset, and disturbances of ANS affect R–R intervals (RRI) on an electrocardiogram (ECG). This study aims to develop a machine learning algorithm for predicting focal epileptic seizures by monitoring R–R interval (RRI) data in real time. The developed algorithm adopts a self-attentive autoencoder (SA-AE), which is a neural network for time-series data. The results of applying the developed seizure prediction algorithm to clinical data demonstrated that it functioned well in most patients; however, false positives (FPs) occurred in specific participants. In a future work, we will investigate the causes of FPs and optimize the developing seizure prediction algorithm to further improve performance using newly added clinical data.

     

High-temperature oxidation of Al-deposited stainless-steel foils

The oxidation resistance of Al-deposited Fe–Cr–Al foils containing small amounts of La and Ce was assessed by a cyclic oxidation test with temperature varying between room temperature and 1323 K to 1423 K in static air. (1) The Al content of Fe–Cr–Al–La, Ce foils can be increased by depositing an Al layer from the vapor phase. The deposition of a 1-m-thick Al layer on both sides of the 50-m-thick foil is equivalent to a 1.5 mass% increase in the Al content. The deposited Al diffuses into the foil during heat treatment. The uniform distribution of Al is obtained by heating at 1273 K for 18 ks. (2) After the initial transition stage the oxidation follows the parabolic law until breakaway sets in. The scale consists mainly of -Al₂O₃ during the parabolic period. (3) The increase in the Al content by more than 5 mass% by the Al-deposition remarkably improves high-temperature oxidation resistance (smaller parabolic rate constant and longer protection time). (4) The Al-deposited foils have better oxidation resistance than the conventional foils with the same contents of Al and rare-earth elements. This is attributable to the different nature of the initially formed oxide on the Al-deposited foil. (5) The so-called rare-earth element effect was also observed for the Al-deposited foils. Predominant diffusion of oxygen through the Al₂O₃ scale and vacancy-sink mechanism are applicable to the present results.     

Effects of α-tocopherol level in raw venison on lipid oxidation and volatiles during storage

Relationships between α-tocopherol concentration in the muscle and development of lipid oxidation or volatiles in raw venison were studied. Fourteen Japanese Shika Deer (Cervus nippon) were fed various amounts (0–3.0 g of α-tocopheryl acetate per animal) during the different periods (0–37 days) and then M. longissimus thoracium et lumborum (LD muscles) with a range of α-tocopherol concentrations (4.1–15.1 mg/kg tissue) were obtained. For stabilizing the lipid during storage for 11 days under air, over ca. 9 mg of α-tocopherol per kg tissue were required based on levels of 2-thiobarbituric acid reacting substances (TBARS) numbers. Nine compounds were identified in headspace volatiles, and one of the volatiles was hexanal which has been recognized as off-flavour component. For depressing the hexanal evolution, at least ca. 9 mg of α-tocopherol per kg tissue were also required for 11 days’ storage. This value was much higher than other species. The reasons for higher requirement of α-tocopherol were possibly due to the higher concentration of unsaturated fatty acid and myoglobin in venison.     

Mating-induced mating-type cassette conversion in Saccharomyces cerevisiae

We have previously reported that the HMRa-bearing restriction fragment of a rho degrees sir4-11 strain (HMLalpha-MATalpha-HMRa), which acts as an alpha-mater because of being rho degrees , changes its electrophoretic mobility when the strain mates with a certain group of a-mating strains (HMLalpha-MATa-HMRa). In this study, we found that the sir4-11 strain being rho degrees was not essential for this phenomenon and also that the altered form of the fragment contained HMRalpha in place of HMRa. Furthermore, we observed conversion of HMLa to HMLalpha in the cross in which a sir4-11 HMLa-MATalpha-HMRalpha strain was mated with a representative of the above-mentioned a-mating strain. In addition, when this a-mating strain was mated with a SIR(+) HMLalpha-MATa-HMRalpha strain, the resultant diploid was found to be HMLalpha/HMLalpha MATa/MATalphaHMRa/HMRalpha, indicating that conversion of MATa to MATalpha had taken place in the course of mating. From all these observations, we conclude that there is a group of S. cerevisiae strains that carries factor(s) that induces conversion of a mating-type cassette of the mating partner to alpha mating-type cassette and that this mating type cassette conversion takes place in all three mating type loci, HML, MAT and HMR, if the loci are in the non-silenced condition.     

Simple plunge freezing applied to plant tissues for capturing the ultrastructure close to the living state

In order to observe the ultrastructure close to the living state, simple plunge freezing in liquid propane was applied to plant tissues. The method yielded a well-preserved ultrastructure to a depth of up to 40 microm from the surface of the young pea leaves, which were used as the specimen. Within the well-frozen area all membranes appeared smooth and the ultrastructural details of each organelle were similar to those obtained by high-pressure freezing. Several physical connections between the membranes were visualized. The relative simplicity and the satisfactory freezing performance of the method render it suitable for capturing the features of actively functioning cells in routine ultrastructural studies.     

Design and evaluation of robot patient for nursing skill training in patient transfer

We developed a robot patient for patient transfer training for simulating a patient’s performance during patient transfer and for enabling nurses to practice their nursing skills on it. To realize the robot patient, we focused on addressing the problems of designing its limb actions to enable it to respond to nurses’ operations. RC servos and electromagnetic brakes were installed in the joints to enable the robot to simulate a patient’s limb actions, such as embracing and remaining standing. To enable the robot to automatically respond to nurses’ operations, an identification method for these operations was developed that used voice commands and the features of the limbs’ posture measured by angle sensors installed in the robot’s joints. The robot patient’s performance was examined by a control test in which four experienced nursing teachers performed patient transfer with the robot patient and a human-simulated patient. The results revealed that the robot patient could successfully simulate the actions of a patient’s limbs according to the nursing teachers’ operations and that it is suitable for nursing skill training.     

Increased energy absorption in ZnO arrester elements throughcontrol of electrode edge margin

ZnO nonlinear dielectric has a small temperature coefficient of conductivity up to about 550 C, and above 550 C the temperature coefficient of conductivity becomes substantially positive, which tends to result in thermal runaway through condensation of the current density into filaments which “melt” their way through the ceramic. Thus to obtain maximum energy absorption in a ZnO element, it is important to avoid hot spots so that the element will heat quite uniformly to its maximum stable operating temperature in the range of 550 C. The current density at the electrode edge is enhanced by spreading of the current into the ZnO at radii larger than the electrode. This causes an enhanced temperature at the electrode edge which results in the “melting punctures” commonly observed. Using transient, nonlinear finite element analysis with coupled thermal and electric fields, the authors have quantified the temperature enhancement as a function of edge margin and optimized the electrode topology     

Estimation of forest area near deserts — production of Global Bio-Methanol from solar energy

This paper proposes a new synthesis method for methanol as a future alternative fuel, by the combination of carbon supplied from wood and hydrogen supplied from the electrolysis of water using a solar power generation system in the desert. In the developed countries, more than half of the potential forest area has already been converted into other land uses, while existing forests are well organized and available for wood production. In the developing countries, potential forest sites are expected to be available for wood production, even though they are presently grasslands or secondary forests, while natural tropical forests will not be allowed to be converted into artificial forests. The area available for plantations within 500 km distant from deserts was estimated to be 65 Mha in the world, except for the mountain areas. Biomass production from these sites will be converted annually into 980 Mt methanol with hydrogen from the deserts. This amount is equal to 34% of the world's fuel consumption by vehicles.