Matrix-pattern-based computer algorithm for solving fuzzy relation equations

This paper proposes a new computer algorithm to solve the fuzzy relation equation P/spl ogr/Q=R, where /spl ogr/ denotes max-min composition or max-product composition. This algorithm operates systematically and graphically on a matrix pattern to get all the solutions of P. Furthermore, by using MATLAB software 6.0, the algorithm is implemented in a computer program attached in the appendix of this paper. Two examples are given to illustrate the effectiveness of the proposed algorithm.     

Passive gain-equalized wide-band erbium-doped fiber amplifier using samarium-doped fiber

A passive gain-equalization technique of erbium-doped fiber amplifier (EDFA) using a samarium-doped fiber to obtain wide-band flattened gain operation is reported. In the wavelength range from 1529-1559-nm, small inter-channel gain variations can be achieved. This simple technique is suitable for multiwavelength wide-band in-line-amplifier cascaded transmission applications.     

Determination of intraparticulate mass transfer coefficients via permeation measurements: theory and experimental validation

A mathematical model of mass transfer through a heterogeneous, multiphase barrier has been developed where the dispersed phase is capable of uptake of the diffusant according to a linear relationship. The model was used to describe the penetration of drugs through dispersions of permeable globules in media of known diffusional properties. Water-in-oil-in-water (W/O/W) multiple emulsions have been studied by this method. When used to analyze data obtained with a simple diffusion cell, the model allows the calculation of the mass transfer coefficient which characterizes the diffusional mass transfer across oil-water interfaces within the emulsions. The mass transfer coefficient is directly related to the drug release rate from the internal phases of multiple emulsions. Those cases where instantaneous equilibria are established or where impermeable globules are present can be treated as special limiting cases. Differential equations which express diffusant concentrations as functions of time, space, and dispersion system parameters have been solved by Laplace transformation without recourse to numerical methods. The values of the mass transfer coefficient are shown to reflect the physical characteristics of multiple emulsion systems.     

Surveying instructor and learner attitudes toward e-learning

The trend of using e-learning as a learning and/or teaching tool is now rapidly expanding into education. Although e-learning environments are popular, there is minimal research on instructors’ and learners’ attitudes toward these kinds of learning environments. The purpose of this study is to explore instructors’ and learners’ attitudes toward e-learning usage. Accordingly, 30 instructors and 168 college students are asked to answer two different questionnaires for investigating their perceptions. After statistical analysis, the results demonstrate that instructors have very positive perceptions toward using e-learning as a teaching assisted tool. Furthermore, behavioral intention to use e-learning is influenced by perceived usefulness and self-efficacy. Regarding to learners’ attitudes, self-paced, teacher-led, and multimedia instruction are major factors to affect learners’ attitudes toward e-learning as an effective learning tool. Based on the findings, this research proposes guidelines for developing e-learning environments.     

Surface modification and functionalization of electroactive polymer films via grafting of polyelectrolyte,polyampholyte and polymeric acids

Films of electroactive polymers, such as polyaniline (PAN) in its emeraldine base form, and poly(3-alkylthiophene), poly(3-hexylthiophene) (P6TH), poly(3-octylthiophene) (P8TH), and poly(3-dodecylthiophene) (P12TH) can be readily functionalized via thermal or near ultraviolet-light-induced surface graft copolymerization with monomers of polyelectrolyte, polyampholyte and polymeric acids. The monomers used in the present work include dimethyl sulphate quaternized dimethylamino-ethylmethacrylate (DMAEM·C₂H₆SO₄), 3-dimethyl(methacryloyloxyethyl)ammonium propane sulphonate (DMAPS), acrylic acid (AAc) and a sodium salt of styrene sulphonic acid (NaSS). The surface structures and compositions of the electroactive polymer films after functionalization via graft copolymerization were characterized by angle-resolved X-ray photoelectron spectroscopy. Graft copolymerization of poly(3-alkylthiophene) films, but not PAN films, with the hydrophilic monomers readily results in a stratified surface microstructure arising from the migration of the hydrophilic graft chains beneath a thin surface layer which is much richer in the substrate chains. On the other hand, graft copolymerization of PAN films with AAc and NaSS readily gives rise to a self-protonated (and thus conductive) surface structure.     

Crossing the planes at high speed. Signal integrity issues at splitground and power planes

This article discusses a specific design situation that represents quite a broad class of problems in the study of signal integrity. The article focuses on the effects on high-speed signals that need to cross split ground planes and split power planes that act as signal references or partial references. Such configurations are frequently needed in the layout of printed circuit boards (PCBs), multichip modules (MCMs), and even single-chip modules. Examples of split ground and power planes are discussed first. The conventional effective inductance model is described briefly, and an accurate and efficient transmission line model is then discussed in detail. Examples of modeling and design trade-offs are also presented     

Eight-channel bidirectional WDM add/drop multiplexer

The authors propose and demonstrate an eight-channel reconfigurable bidirectional wavelength division multiplexed (WDM) add-drop multiplexer in which all channels can be added/dropped independently in either direction. The performance of the bidirectional WDM add/drop multiplexer is experimentally studied for a data rate of 10 Gbit/s per channel, providing an overall capacity of 80 Gbit/s. It is found that the performance of the add/drop multiplexer is not degraded by a backward propagating signal     

Generalized impedance control of robot for assembly tasks requiringcompliant manipulation

To perform assembly tasks requiring compliant manipulation, the robot must follow a motion trajectory and exert an appropriate force profile while making compliant contact with a dynamic environment. For this purpose, a generalized impedance in the task space consisting of a second-order function relating the motion errors and interaction force errors is introduced such that the contact force can be commanded and controlled. With generalized impedance control, the robot can behave with a desired dynamic characteristic when it interacts with the environment. To ensure the success of the assembly, a strategy during task planning which takes into consideration the interrelation between motion and force trajectories as well as contact compliance is introduced. The generalized impedance control method is applied to the prismatic joint of a selective compliance assembly robot arm (SCARA) robot for inserting a printed circuit board (PCB) into an edge connector socket. Depending on the progress of the parts joining operation, various amount of interaction forces are generated which have to be accommodated. It is demonstrated that an assembly strategy which consists of a sequence of carefully planned target impedance can enable the task to be executed in a desirable manner. The effectiveness of this approach is illustrated through experiments by comparing the results with those obtained using a well-established position control scheme as well as the original impedance control method