Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

A 322 MHz random-cycle embedded DRAM with high-accuracy sensing and tuning

A 16 Mb embedded DRAM macro in a fully CMOS logic compatible 90 nm process with a low noise core architecture and a high-accuracy post-fabrication tuning scheme has been developed. Based on the proposed techniques, 61% improvement of the sensing accuracy is realized. Even with the smallest 5 fF/cell capacitance, a 322 MHz random-cycle access while 32 ms data retention time which contributes to save the data retention power down to 60 /spl mu/W are achieved.     

Automated camerawork for capturing desktop presentations

A novel automated camera control method for capturing desktop presentations is introduced. Typical features and the camerawork of shots that appear frequently in TV programs are discussed. To realise those features in this automated video capturing system, the purpose of camerawork is classified from two points of view: target and aspect-of-target. Then, the correspondence between the classification and typical shots and camerawork is considered. A virtual-frame control algorithm based on this idea is proposed, and its implementation in a video production system. Results are shown that verify this method through two kinds of experiments, virtual video capturing using CG animations and real video capturing of real presentations.     

Optimal production-inventory policy for make-to-order versus make-to-stock based on the M/Er/1 queuing model

This paper analyzes a multi-product production / inventory system where demands for each item arrive according to a Poisson process and the production time for each product has an Erlang distribution. The paper proposes an optimality condition that specifies whether each product should be produced make-to-stock or make-to-order. In the event a product should be produced make-to-stock, an approach for computing the optimal base-stock level is proposed. Numerical examples are given for illustrative purpose.     

Regenerating-mode low-speed operation of sensorless induction motor drive with adaptive observer

Speed estimation methods for sensorless induction motor drives can be divided into two groups. One is based on information about fundamental components of stator currents and voltages. The other is based on high-frequency components injection in stator voltages or currents. The latter may operate stably under zero frequency, which occurs in regenerating mode at low speeds. It, however, causes loss increasing and torque ripple. The former is difficult to operate under zero frequency. The authors propose a stable method categorized in the former group even in regenerating mode at low speeds. The proposed method is based on an adaptive flux observer. First, a new observer gain design is shown. Next, a method avoiding zero-frequency operation with controlling a rotor flux level is proposed.     

Dynamic bandwidth control of the virtual path in an asynchronoustransfer mode network

The virtual path concept has several valuable features to construct an economical and efficient asynchronous transfer mode (ATM) network. One of them is bandwidth control which affords transmission efficiency improvement through statistical sharing of capacity. An effective bandwidth control algorithm and its calculated performance are described. Network performance with the algorithm is evaluated, and the bandwidth control is shown to successfully improve network transmission efficiency with only a slight increase in processing load compared to the fixed bandwidth scheme. A method is also proposed to equalize call loss probability for each virtual path. The effectiveness of the method is demonstrated by analysis     

Pixel design of pulsed CMOS image sensor for retinal prosthesis with digital photosensitivity control

A newly designed pulse frequency modulation photosensor for use in retinal prosthesis is proposed and demonstrated. The pixel converts the intensity of incident light into biphasic current pulses at frequencies suitable for the electrical stimulation of retinal neurons. Experimental results showed that the device was sensitive over a dynamic range of input light of about 120 dB, and that photosensitivity could be varied from 0 dB to around -40 dB.     

Analysis of mutational specificity induced by heterocyclic amines in the lacZ gene of Escherichia coli

Mutational spectra induced by different heterocyclic amines were characterized and compared with those obtained from diethylnitrosamine and N-methyl-N-nitrosourea. Mutation classes were identified by means of a series of mutant lacZ genes in F' episomes in Escherichia coli engineered to detect specifically each of two transitions, four transversions and five kinds of frameshift events. More than 99.5% of the mutations induced by heterocyclic amines were frameshift mutations. -2(C.G-G.C) frameshifts were favored over other types, such as +1(G.C), -1(G.C), +1(A.T) and -1(A.T), except when 3-amino-1,4-dimethyl-5H-pyrido[4,3-b]indole (Trp-P-1) was administered. -1(G.C) and +1(G.C) frameshifts predominate following Trp-P-1 treatment. A small number of G.C-->T.A transversions were induced by the treatment with 2-amino-3,4-dimethylimidazo[4,5-f]quinoline as well as with several other heterocyclic amines examined. Since G.C-->T.A transversions, but not frameshift mutations, are reported to play a role in heterocyclic amine-induced activation of the c-Ha-ras protooncogene or inactivation of the p53 tumor suppressor gene, the low level of base substitutions, particularly G.C-->T.A transversions, may represent a partial explanation for the relatively modest carcinogenic activity of heterocyclic amines, despite their extraordinarily strong mutagenicity in the Salmonella mutation assay.