基建勘探在超深井矿山建设中的应用：以思山岭铁矿为例#br#

思山岭铁矿上下采区首采开拓中段标高分别为-1 020 m和-1 200 m，地质勘查程度为详查，资源储量级别为控制的（122b）和推断的（333）。经基建巷道工程揭露，矿体赋存形态并非地质勘查时认为的“似金元宝形”向斜，而是单斜构造控制的矿体形态。详细分析了基建勘探工作在该矿建设中的作用，认为基建勘探采用探采结合、坑钻组合手段，注重综合研究概化地质模型，对矿井基建开拓设计和施工具有较好的指导作用。     

Microwave drying performance of lignite with the assistance of biomass-derived char

Microwave lignite drying with assistance of biomass-derived char was addressed and effect of bio-char on drying rate and energy consumption was investigated in this work. Effective diffusion coefficient and activation energy for the drying process were also analyzed. The results indicated the drying process was largely dependent on the variation of sample temperature. Bio-char originated from pine wood was most favorable for lignite drying, considering its better promoting effect and advanced security. There existed an optimal bio-char addition ratio for drying process at different power. The corresponding optimal ratio was 10% at 231?W and 15% at 385?W, at which the biggest drying rate and the least energy consumption were reached. It was compared lignite drying initiated at 385?W was better for energy conservation. Effective diffusivity was improved and activation energy was simultaneously reduced, with the addition of bio-char. The minimum activation energy was 15.54?W?·?g^?1, which was gained at bio-char addition ratio of 10%. The results revealed the effect of bio-char on depressing activation energy could rival that of metal-based additives. The drying process with assistance of microwave and bio-char could present technical and economical benefits on lignite upgrading.     

齐大山铁矿南帮含水构造带探测研究

为解决采空区突发涌水给矿山安全生产带来的安全威胁,以齐大山铁矿为研究对象,以高密度电阻率法含水构造带理论模型的正演模拟研究为基础,运用高密度电阻率法对采场南帮含水构造带的异常范围进行了圈定;运用瞬变电磁法进行了二次探测,并对高密度电阻率法所圈定的异常范围进行了验证。研究表明:含水构造带显示为低阻异常特征,在高密度电阻率法探测成果图中显示的两处低阻异常与含水构造带理论模型的正演模拟结果一致;同时,在瞬变电磁法探测成果图中显示的低阻区域均在高密度电阻率法所圈定的低阻异常范围内,二者相互验证,这两处低阻异常均为含水构造带的地球物理异常特征的显示,表明采用高密度电阻率法和瞬变电磁法组合识别技术可实现对隐伏含水构造带的先导性探测。     

三维最短路径法射线追踪及改进

射线追踪技术在地震学领域有着广泛的应用，其中以最短路径算法在复杂介质中走时计算稳定性最好。理论上最短路径法的误差来源为速度模型采样误差、空间离散化误差和角度离散化的误差，由此造成网格稀疏时射线路径呈之字形，计算走时比实际走时偏大。弯曲法追踪精度高，但是射线追踪速度受初始路径与真实射线路径逼近程度制约，在复杂介质中可能找不到全局最小走时路径。最短路径法追踪出来的网格射线路径，可以作为较理想的初始路径，供弯曲法迭代优化。将最短路径法和弯曲法结合，通过射线在初始路径附近的扰动得到Fermat原理约束下的最短路径。文章对常速模型的试算，显示了改进方法对射线路径优化的作用，在模型网格稀疏的情况下效果尤其明显。本算法适用于计算三维任意复杂介质中初至波走时和射线路径，可应用于三维走时层析成像等领域。     

天然气合成油技术发展动向

介绍了天然气合成油技术，天然气石油特征及代表性工艺过程，叙述了天然气合成油发展前景。     

新型海洋涂料技术

本文综述了符合时代要求的海洋涂料新技术及其发展趋势。     

液压集成块校核软件的编制和应用

本文叙述了液压集成块校核软件的编制思想和方法，并重点介绍了编制过程中所使用的相关技术，同时给出部分源程序。