An evaluation of ruminally degradable intake protein and metabolizable amino acid requirements of feedlot calves

Ruminally degradable intake protein (DIP) and metabolizable indispensable amino acid (MIAA) requirements of feedlot steers were evaluated. Dietary treatments consisted of isocaloric 80% concentrate steam-flaked corn-based diets containing either .8% urea, 1.5% fish meal (FM), 3.0% FM, 4.5% FM, or 4.5% soybean meal (SBM). Treatment effects on characteristics of ruminal and total tract digestion were evaluated using four Holstein steers (249 kg) with cannulas in the rumen and proximal duodenum. Ruminal digestibility of OM (RDOM; P < .05) and feed N (P < .01) and microbial N flow (MNF; P < .01) to the small intestine were greater with urea as the supplemental N source. The level of DIP was closely associated (R2 = .89) with MNF. Postruminal digestibility of OM was greater (P < .05) for FM than for urea-supplemented diets, compensating for lower RDOM. There were no treatment effects (P > .10) on DOM. As the level of FM was increased, MIAA increased linearly (P < .01). Intestinal MIAA were similar (P > .10) for urea- and SBM-supplemented diets. Treatment effects on 56-d growth performance were evaluated using 100 medium-framed crossbred steers (231 kg). Daily weight gain (linear effect; P < .01), DM intake (linear effect; P < .10), feed efficiency (linear effect; P < .05), and diet NE (linear effect; P < .05) increased with level of FM supplementation. Daily weight gain (P < .10) and DM intake (P < .05) were greater for urea- than for SBM-supplemented diets. Using bovine tissue as the reference protein, the biological value (based on chemical score) of the intestinal chyme protein averaged 73%; methionine was first-limiting. There was a close association (R2 = .99) between methionine supply to the small intestine and observed/expected dietary NE. The metabolizable methionine requirement (MMETR, g/d) of medium-framed feedlot steers can be reliably predicted from measures of BW and ADG (MMETR = 1.565 + .0234ADG[268 - (29.4 x .0557BW(.75)ADG(1.097))/ADG] + .0896BW(.75)). There was a very close association (R2 = .89) between DIP and MNF (MNF = 13.7DIP - .66DIP(2) + 25.9). At maximal observed synthesis, DIP accounted for 76% of the MNF. A minimum of 100 g DIP/kg of total tract digestible OM was required to maximize RDOM and MNF.     

Tyrosine kinase inhibition produces specific alterations in axon guidance in the grasshopper embryo

Tyrosine kinase signaling pathways are essential for process outgrowth and guidance during nervous system development. We have examined the roles of tyrosine kinase activity in programming growth cone guidance decisions in an intact nervous system in which neurons can be individually identified. We applied the tyrosine kinase inhibitors herbimycin A and genistein to whole 40% grasshopper embryos placed in medium, or injected the inhibitors into intact grasshopper eggs. Both inhibitors caused interneuronal axons that normally would grow along the longitudinal connectives to instead leave the central nervous system (CNS) within the segmental nerve root and grow out toward the body wall muscles. In addition, herbimycin A produced pathfinding errors in which many longitudinal axons crossed the CNS midline. To study how this drug affected guidance decisions made by individual growth cones, we dye-filled the pCC interneuron, which normally extends an axon anteriorly along the ipsilateral longitudinal connective. In the presence of herbimycin A, the pCC growth cone was redirected across the anterior commissure. These phenotypes suggest that tyrosine kinase inhibition blocks a signaling mechanism that repels the growth cones of longitudinal connective neurons and prevents them from crossing the midline.     

Modification of Iron with Degradable Silver Phases Processed via Laser Beam Melting for Implants with Adapted Degradation Rate

In medical technology, implants are used to improve the quality of patients’ lives. The development of materials with adapted properties can further increase the benefit of implants. If implants are only needed temporarily, biodegradable materials are beneficial. In this context, iron-based materials are promising due to their biocompatibility and mechanical properties, but the degradation rate needs to be accelerated. Apart from alloying, the creation of noble phases to cause anodic dissolution of the iron-based matrix is promising. Due to its high electrochemical potential, immiscibility with iron, biocompatibility, and antibacterial properties, silver is suited for the creation of such phases. A suitable technology for processing immiscible material combinations is powder-bed-based procedure like laser beam melting. This procedure offers short exposure times to high temperatures and therefore a limited time for diffusion of alloying elements. As the silver phases remain after the dissolution of the iron matrix, a modification is needed to ensure their degradability. Following this strategy, pure iron with 5 wt% of a degradable silver–calcium–lanthanum alloy is processed via laser beam melting. Investigation of the microstructure yields achievement of the intended microstructure and long-term degradation tests indicates an impact on the degradation, but no increased degradation rate.     

Untersuchung einer mehrlagigen Schweißnaht eines dickwandigen Rohres aus dem austenitischen Stahl X6 CrNiNb 18 10

Analysis of a multi pass weld of a thick walled tube made of austenitic stainless steel X6 CrNiNb 18 10 In this paper, microstructure and residual stresses of a multi pass welding of a thick‐walled tube made of austenitic stainless steel X6 CrNiNb 18 10 (1.4550) are systematically characterized and assessed. Results of microstructural and phase analyses, residual stress and hardness measurements as well as of a tensile test using micro specimen and SEM analyses are presented. Using these data, plastic deformations occurring during the welding process in the vicinity of the weld seam are evaluated. Finally, consequences of an additional heat treatment at 400 °C/24 h are studied.     

Evidence for a Turner syndrome locus or loci at Xp11.2-p22.1

Turner syndrome is the complex human phenotype associated with complete or partial monosomy X. Principle features of Turner syndrome include short stature, ovarian failure, and a variety of other anatomic and physiological abnormalities, such as webbed neck, lymphedema, cardiovascular and renal anomalies, hypertension, and autoimmune thyroid disease. We studied 28 apparently nonmosaic subjects with partial deletions of Xp, in order to map loci responsible for various components of the Turner syndrome phenotype. Subjects were carefully evaluated for the presence or absence of Turner syndrome features, and their deletions were mapped by FISH with a panel of Xp markers. Using a statistical method to examine genotype/phenotype correlations, we mapped one or more Turner syndrome traits to a critical region in Xp11.2-p22.1. These traits included short stature, ovarian failure, high-arched palate, and autoimmune thyroid disease. The results are useful for genetic counseling of individuals with partial monosomy X. Study of additional subjects should refine the localization of Turner syndrome loci and provide a rational basis for exploration of candidate genes.     

Body protein losses estimated by nitrogen balance and potassium-40 counting

Body protein losses estimated from N balance were compared with those estimated by 40K counting. Six nonlactating dairy cows were fed an adequate N diet for 7 wk, a low N diet for 9 wk, and a replete N diet for 3 wk. The low N diet contained high cell wall grass hay plus ground corn, starch, and molasses. Soybean meal was added to the low N diet to increase N in the adequate N and replete N diets. Intake was measured daily. Digestibilities, N balance, and body composition (estimated by 40K counting) were determined during each dietary regimen. During low N treatment, hay dry matter intake declined 2 kg/d, and supplement increased about .5 kg/d. Dry matter digestibility was not altered by N treatment. Protein and acid detergent fiber digestibilities decreased from 40 and 36% during adequate N to 20 and 2%, respectively, during low N. Fecal and urinary N also declined when cows were fed the low N diet. By the end of repletion, total intake, fiber, and protein digestibilities as well as N partition were similar to or exceeded those during adequate N intake. Body protein (N) loss was estimated by N balance to be about 3 kg compared with 8 kg by 40K counting. Body fat losses (32 kg) were large because of low energy digestibility and intake. Seven kilograms of body fat were regained during repletion, but there was no change in body protein.     

Application of activated charcoal in the downstream processing of bacterial olefinic poly(3-hydroxyalkanoates)

Medium chain length poly(hydroxyalkanoates) (mcl-PHAs) are bacterial thermoplastic elastomers with a large potential in medical applications. The present study provides a novel process to isolate and purify poly([R]-3-hydroxy-omega-undecenoate-co-3-hydroxy-omega-nonenoate-co-3-hydroxy-omega-heptenoate) (PHUE) and poly([R]-3-hydroxy-omega-undecenoate-co-3-hydroxy-omega-nonenoate-co-3-hydroxyoctanoate-co-3-hydroxy-omega-heptenoate-co-3-hydroxyhexanoate) (PHOUE) from Pseudomonas putida species. Three different types of activated charcoal were compared with regard to their capability to selectively remove impurities. The product 'Charcoal activated, powder, pure' from Merck was found to be most suitable. Using ethyl acetate as solvent, the polyesters were extracted from freeze-dried biomass at room temperature and simultaneously purified by addition of activated charcoal at the beginning of the extraction. The period of extraction was one hour and the ratio solvent to biomass was 15:1 (vol/wt). After extraction, the solids were separated by pressure filtration through a metallic lace tissue. The filtrate was again passed through the previously accumulated filter cake, followed by a second filtration through a 0.45 microm membrane to remove finest coal particles. The resulting filtrate was concentrated, thus yielding polyesters whose quality and yield depended on the quantity of activated charcoal applied. For highly pure PHUE and PHOUE with low endotoxin levels, the optimum ratio of activated charcoal to solvent for extraction (V/V) was found to be 0.5 for PHUE and 0.25 for PHOUE. The yields with regard to the raw polymers amounted to 55 wt% for PHUE and 75 wt% for PHOUE, which are acceptable for polymers that can be used for medical applications.