Evaluation of inelastic constitutive models under plasticity-creep interaction for steel at 600°C

Uniaxial tests to identify plasticity-creep interaction in steel at 600°C were carried out as the Benchmark Project by the Subcommittee on Inelastic Analysis and Life Prediction, JSMS. The purpose of this paper is to present recent experimental data and predictions of constitutive models obtained in the project. Ten types of constitutive models were utilized to compare analytical predictions to sixteen benchmark experiments which are grouped into four categories: (I) tensile and creep tests under monotonic loading, (II) mixed mode tests under plastic and creep loading, (III) ratcheting deformation tests under program loads, and (IV) cyclic deformation tests under the combination of different strain rates. The benchmark tests in Group IV are used to estimate the creep-fatigue life of steel; the results will be published in a separate paper.     

Stabilization of bioethanol recovery with silicone rubber‐coated ethanol‐permselective silicalite membranes by controlling the pH of acidic feed solution

In order to produce highly concentrated bioethanol by pervaporation using an ethanol‐permselective silicalite membrane, techniques to suppress adsorption of succinic acid, which is a chief by‐product of ethanol fermentation and causes the deterioration in pervaporation performance, onto the silicalite crystals was investigated. The amount adsorbed increased as the pH of the aqueous succinic acid solution decreased. The pervaporation performance also decreased with decreasing pH when the ternary mixtures of ethanol/water/succinic acid were separated. Using silicalite membranes individually coated with two types of silicone rubber, pervaporation performance was significantly improved in the pH range of 5 to 7, when compared with that of non‐coated silicalite membranes in ternary mixtures of ethanol/water/succinic acid. Moreover, when using a silicalite membrane double‐coated with the two types of silicone rubber, pervaporation performance was stabilized at lower pH values. In the separation of bioethanol by pervaporation using the double‐coated silicalite membrane, removal of accumulated substances having an ultraviolet absorption maximum at approximately 260 nm from the fermentation broth proved to be vital for efficient pervaporation. Copyright © 2005 Society of Chemical Industry     

An analysis of slow phase velocity on congenital nystagmus-asymmetrical responses of optokinetic stimulation

Persistence of the hypoglossal artery is an unusual congenital abnormality of the carotid arterial system, and the simultaneous occurrence of atheromatous disease in the internal carotid artery and persistent hypoglossal artery is even more uncommon. Carotid surgery in this situation is challenging, and the surgeon must be aware of potential inherent pitfalls. A 74-year-old woman with asymptomatic stenosis of both internal carotid and hypoglossal arteries associated with occlusion of the contralateral internal carotid artery underwent successful revascularization. The anatomy of this unusual lesion and the surgical strategies, which included cranial nerve dissection and mandibular subluxation, are reviewed.     

A high resolution negative working resist,LMR-UV,for g- and i-line lithography

LMR-UV (“low molecular weight resist for uv lithography”), a naphthoquinone-diazide sulfonic acid ester of a novolak resin, is a negative working resist. The mechanism of insolubilization of LMR-UV is based on the facts that the naphthoquinone-diazide moiety is decomposed to indenecarboxylic acid (polar compound) by photolysis upon UV irradiation and that the irradiated resist film insolubilizes in a non-polar developer. LMR-UV reliably forms 0.6 μm lines and spaces over a reflective substrate with steps by using a g-line stepper having a 0.35 NA lens. 0.6 μm-wide aluminum patterns over topography are obtained by use of g-line exposure and reactive ion etching. By use of an i-line aligner (NA = 0.42), LMR-UV resolves 0.25 μm space patterns with overhang profiles. The profiles are due to the large absorption coefficient of 3.8 μm^?1. 0.3 μm wide aluminum patterns are formed by i-line exposure and lift-off metallization.     

Autonomic nervous function of the patients with neurally mediated syncope

Although diagnosis of neurally mediated syncope (NMS) using head-up tilt (HUT) test has been established, the exact mechanism of NMS has not yet been elucidated. We evaluated beta and alpha-adrenergic function in NMS patients by pharmacological autonomic function test. The alpha-adrenergic sensitivity of NMS patients was significantly lower than that of control subjects. The patients who need low dose isoproterenol for provocation of syncope showed higher beta-adrenergic sensitivity than patients who developed syncope without isoproterenol. Thus, pharmacological autonomic function test was useful for evaluation of NMS patients.     

Characterization of cytochrome P450 (CYP3A12) induction by rifampicin in dog liver

We investigated the mechanisms of renal vascular wall thickening in a rat model of N-nitro L-arginine methyl ester (L-NAME)-induced hypertension. To separate the effects of L-NAME-induced hypertension from other effects of nitric oxide (NO) inhibition, we created two models of L-NAME-induced hypertension: both had the same blood pressure level but NO inhibition was moderate in one group (group M) and severe in the other (group S). Urinary excretion of nitrates and nitrites was lower in group S than in group M. Wall thickening and lipid deposition in renal vessels were significantly greater in group S than in groups M. Simple and multiple regression analyses indicated that renal vascular wall thickening was more strongly correlated with lipid deposition than with blood pressure. The number of vessels positive for staining with Sudan black B was negatively correlated with urinary NO excretion. Expression of fibronectin and transforming growth factor-beta was greater in the Sudan black B-positive than in the Sudan black B-negative vessels, suggesting that extracellular matrix production was increased in vessels with lipid deposition. Lipid deposition and increased production of extracellular matrix may contribute to renal vascular wall thickening in L-NAME-induced hypertension. Some mechanisms independent of hypertension play important roles in vascular wall thickening induced by NO inhibition.     

A sequencing problem for a mixed-model assembly line in a JIT production system

In an assembly line of a just-in-time (JIT) production system, workers have the power and the responsibility to stop the line when they fail to complete their operations within their work zones. This paper deals with a sequencing problem for the mixed-model assembly conveyor line in the JIT production system. In some environment, the most important criterion is the line stoppage rather than the variation of production rates. The problem is to find an optimal sequence of units that minimizes the total line stoppage time. Lower and upper bounds of the total line stoppage time are derived and the branch-and-bound method is applied to the problem. A numerical example is given.     

Stability of tetragonal ZrO2 phase in Al2O3 prepared from Zr-Al organometallic compounds

Zr-Al organometallic compounds have been spray-dried and heated at temperatures 600 to 1400°C to prepare ZrO₂-Al₂O₃ composite powders. The powders consist of balloon-like particles 0.5 to 2 m in diameter with homogeneously dispersed tetragonal ZrO₂ grains 0.1 to 0.2 m in diameter. The tetragonal fraction of ZrO₂ in the composite powders is higher than that in the powders prepared from sols of Zr(OBuⁿ)₄ and Al[OCH(CH₃)₂]₃. The fraction is affected by the organofunctional group in the Zr-Al compounds.Zr(OBuⁿ)₄ = Zr(OC₄Hgⁿ)₄; Al[OCH(CH₃)₂]₃ = Al(OPrⁱ)₃.