Doped silicon and NIS junctions for bolometer applications

We discuss the performance, of a normal metal hot electron bolometer (NHEB) that we have measured at 0.3 K. We found that the noise equivalent power was limited by the amplifier noise. To improve the NHEB power response and to make it more robust and reliable we propose to substitute the normal metal with heavily doped silicon. The heavily doped silicon behaves like a metal with lower carrier concentration and has a smaller electron–phonon thermal coupling. We have fabricated superconductor-doped silicon-superconductor contacts (S-Sm-S) and we have used them as thermometers and coolers.     

Paste Residence Time in a Spouted Bed Dryer. III: Effect of Paste Properties and Quality Interactions

The aim of this study was to evaluate the effects of paste properties on residence time during drying in a spouted bed dryer with inert bodies. The effect of paste solids content, surface tension, and viscosity on the residence time distribution and the mean residence times were studied using factorial experimental designs. The inert bodies used were glass and polyethylene beads. The mean residence times varied from 13.6 to 16.3 and 12.2 to 17.7 min for drying on glass and polyethylene beads, respectively. The analysis of variance showed that mean residence times significantly depended on solids content and surface tension for glass beads and also on viscosity for polyethylene beads. The residence time distributions for all conditions studied fitted well to the perfect mixing cell when applying the continuous stirred vessels in series model analysis. The powder density, flowability, and particle size depended on paste properties and inert type.     

The Lazy Cook Problem, or Scheduling Two Parallel Machines to Optimize Vehicle Utilization

A cook has to prepare n cakes using an oven with two racks. According to the recipe, the i-th cake has to be baked for exactly a _i minutes. Cakes to be cooked are taken from a table and carried to the oven, and once cooked are carried back to the table by means of a trolley that can carry two cakes at a time. What is the minimum number q ^* of round trips required of the cook? This problem has application to the operation scheduling of transportation systems and to material cutting. A different problem arises according to whether the cook accepts or not to stay near the oven for awhile with the trolley. If the trolley cannot be idle at the oven, an optimum schedule with no oven idle-time always exists: consequently, the trolley schedule is trivial, and the problem is transformed into a set packing. For this case, we propose and test a heuristic method which generates all of the promising columns of the set packing, and solves the resulting problem by branch-and-bound. Instead, if the trolley can be idle at the oven for a limited amount of time, a problem arises to find an optimal schedule of the trolley: in this case we show how to use a scaling technique in order to obtain a very good feasible solution by the method above.     

Nisin expression production from Lactococcus lactis in milk whey medium

BACKGROUND: Nisin is a commercially available bacteriocin produced by Lactococcus lactis ATCC 11454 and used as a natural agent in the biopreservation of food. In the current investigation, milk whey, a byproduct from dairy industries was used as a fermentation substrate for the production of nisin. Lactococcus lactis ATCC 11454 was developed in a rotary shaker (30 °C/36 h/100 rpm) using two different media with milk whey (i) without filtration, pH 6.8, adjusted with NaOH 2 mol L^?1 and without pH adjustment, both autoclaved at 121 °C for 30 min, and (ii) filtrated (1.20 µm and 0.22 µm membrane filter). These cultures were transferred five times using 5 mL aliquots of broth culture for every new volume of the respective media. RESULTS: The results showed that culture media composed of milk whey without filtration supplied L. lactis its adaptation needs better than filtrated milk whey. Nisin titers, in milk whey without filtration (pH adjusted), was 11120.13 mg L^?1 in the second transfer, and up to 1628‐fold higher than the filtrated milk whey, 6.83 mg.L^?1 obtained in the first^t transfer. CONCLUSIONS: Biological processing of milk byproducts (milk whey) can be considered a profitable alternative, generating high‐value bioproducts and contributing to decreasing river disposals by dairy industries. Copyright © 2008 Society of Chemical Industry     

Performance of Green Solvents in the Extraction of Sunflower Oil from Enzyme-Treated Collets

The main goal of this work is to evaluate the extraction of sunflower oil from enzyme-treated collets using ethanol and isopropanol (IPA) as solvents. The sunflower collets are pretreated with the multienzyme complex Viscozyme L prior to solvent extraction by the Soxhlet method. The influence of the moisture content of the collets, pretreatment, processing time, and solvent type on the amount of total extracted material and the oil extraction efficiency is studied. Some quality parameters such as phospholipid content of the oil and chlorogenic acid content of the residual meal are also analyzed. At low moisture content (7%) the solvents exhibit similar oil extraction ability (98–99%), but with increasing moisture the extraction efficiency of ethanol decreases to about 85%, while no significant differences are observed for IPA. The enzymatic treatment increases the extraction efficiency for all times, especially for ethanol. It is observed that IPA is more efficient in the extraction compared to ethanol, and the amount of nonlipid material is reduced by ≈70%. In addition, the oil extracted with IPA have lower phospholipid content and the residual meal presents a higher chlorogenic acid content. Practical Applications:This work would contribute toward the use of green solvents in the extraction of sunflower oil from collets. Ethanol and isopropanol, used as solvents, present attractive advantages, including low toxicity, good operational security, as well as being obtained from a renewable source. The obtained data provide up-to-date information on the use of these alcohols in the extraction of sunflower oil from collets and the influence of operating conditions, such as moisture content, enzymatic pretreatment of the collets, and the extraction time. Information about oil and meal quality is also reported.     

Pulse height defect in pCVD and scCVD diamond based detectors

Polycrystalline (pCVD) and single crystal (scCVD) diamond films grown from Chemical Vapour Deposition (CVD), if sufficiently pure at Raman analysis, are very good materials for beam or flux monitors inside accelerators or nuclear reactors. This is because they are very hard to damage in high radiation fields and very resistant to high temperatures. Films of pCVD diamond are, however, not so good as spectroscopy detectors due to inhomogeneities induced by their growth in grains with the consequent presence of grain boundaries which worsen their energy resolution. The latter can be significantly improved by growing scCVD diamond films onto HPHT synthetic diamond substrates. We have shown that it is possible to measure the density of defects inside diamond specimens using as probes suitable penetrating nuclear radiations. With the preliminary results reported here we'll show that, bombarding CVD diamond films grown at Roma “Tor Vergata” with energetic protons and ⁴He, ⁶Li and ¹²C ions produced in the accelerators of Catania laboratories, the pulse height defects are higher than those in silicon detectors and likewise well described by a power law in the deposited energy. Furthermore, we'll show that pulse heights for the same particles seem to depend on the duration of the measurement, thus exhibiting a sort of depolarization of the insulator when exposed to the electric voltage which makes it a particle detector.     

Nickel Activation for Hydrogenolysis Reaction on USY Zeolite

The effects of the SAR (14 and 38) and of the methodology of introduction of nickel (wetness impregnation and ion exchange) on catalyst activation were investigated in Ni/USY model catalysts submitted to two activation treatments: reduction (A) and reduction/calcination/reduction, successively (B). the catalysts prepared by wetness impregnation, a marked increase in the catalytic activity after treatment B was observed. On the basis of the catalyst efficiency toward ethane hydrogenolysis, the lower SAR catalyst presents a threefold higher activity. On the contrary, the catalysts prepared by ion exchange, as well as a model catalyst prepared by wetness impregnation over a USY exhaustively exchanged with nickel ions, do not present measurable increasing of the catalytic activity under the same activation conditions. Monitoring the catalyst activation by EXAFS indicates the formation of nickel clusters in the impregnated catalysts after activation treatment B, which should be responsible for the high catalytic activity. However, TEM images reveal a bimodal particle size distribution, with large (ca. 20 nm) and small nickel particles. Temperature-programmed reduction performed under the same conditions of catalyst activation suggests that only the small nickel particles are activated under the experimental conditions adopted in this work.     

Removal of fulvic acid from aqueous media by adsorption onto modified vermiculite

Clay minerals are low cost materials that can be structurally modified and exploited for removal of natural organic matter from freshwaters. The present study shows that vermiculites modified by ion exchange with hexadecyltrimethylammonium or intercalation with poly(hydroxy iron) cations are potential adsorbents for removal of fulvic acid, whereas the adsorption on the raw clay mineral is negligible. The efficiency of the modified vermiculite was evaluated by measuring adsorption isotherms by the batch technique using initial fulvic acid concentrations between 2.5 and 50.0 mg L^− 1, with one hour of contact time. At least 94% of the fulvic acid initially present in a 20 mg L^− 1 solution was sorbed onto either the intercalated poly(hydroxy iron) cations or the organically modified vermiculite. Up to an initial concentration of 5.0 mg L^− 1 the adsorption is irreversible, and no quantifiable fulvic acid was measured in the desorption experiments. For initial fulvic acid concentrations between 10.0 and 50.0 mg L^− 1, desorption was between 2.3% and 4.9% for Fe(III) intercalated vermiculite, and between 1.4% and 9.2% for the organoclay. The adsorption percentages on intercalated poly(hydroxy iron) cations increased upon lowering pH and increasing the ionic strength, indicating the occurrence of strong binding mechanisms such as ligand exchange. Adsorption percentage of fulvic acid onto the organoclay also increased with lowering of pH, but in this case the adsorption percentages showed a small decrease at high ionic strength, suggesting that electrostatic attraction plays an important role in the adsorption process.     

Evaluation of the removal of n-butanol vapor by the poly(lactic acid)-zeolite-TiO2 composite and formation of by-products

The use of polymeric films incorporated with zeolite-TiO₂ composites associated with UV radiation can be an alternative in the removal of volatile organic compounds (VOCs) through the adsorption and photodegradation processes. This study produced poly(lactic acid) (PLA) films incorporated with 13× zeolite, TiO₂, and 13×-TiO₂ zeolite composite to remove n-butanol and evaluate the by-products generated in the process. The results showed that 13× zeolite and TiO₂ added individually or as a composite to PLA, gave the polymer matrix a significant increase in the removal capacity of n-butanol. The best performance was presented by the zeolite-TiO₂, composite, confirming a synergistic effect. However, the formation of CO and CO₂ exceeded the expected values, with the verification that the polymeric matrix underwent photodegradation action by TiO₂. The polymeric film only containing zeolite is the most suitable for the removal of VOCs, as it did not present degradation of the PLA, generating a lower concentration of by-products.