Blockchain for Collaborative Businesses

Mobile Networks and Applications - Blockchain applications have continuously improved ever since its first debut on cryptocurrency. From then on, its uses have branched out from the financial...     

Evolving an Accurate Decision Tree-Based Model for Predicting Carbon Dioxide Solubility in Polymers

Solubility is one of the most indispensable physicochemical properties determining the compatibility of components of a blending system. Research has been focused on the solubility of carbon dioxide in polymers as a significant application of green chemistry. To replace costly and time-consuming experiments, a novel solubility prediction model based on a decision tree, called the stochastic gradient boosting algorithm, was proposed to predict CO₂ solubility in 13 different polymers, based on 515 published experimental data lines. The results indicate that the proposed ensemble model is an effective method for predicting the CO₂ solubility in various polymers, with highly satisfactory performance and high efficiency. It produces more accurate outputs than other methods such as machine learning schemes and an equation of state approach.     

Effect of Different Cosolvents on Transesterification of Waste Cooking Oil in a Microreactor

Biodiesel was prepared from waste cooking oil combined with methanol. The process was performed via transesterification in a microreactor using kettle limescale as a heterogeneous catalyst and various cosolvents under different conditions. n‐Hexane and tetrahydrofuran were selected as cosolvents to investigate fatty acid methyl esters (FAMEs). To optimize the reaction conditions, the main parameters affecting FAME% including reaction temperature, catalyst concentration, oil‐to‐methanol volumetric ratio, and cosolvent‐to‐methanol volumetric ratio were studied via response surface methodology. Under optimal reaction conditions and in the presence of the cosolvents n‐hexane and tetrahydrofuran, high FAME purities were achieved. Considering the experimental results, the limescale catalyst is a unique material, and the cosolvent method can reduce significantly the reaction time and biodiesel production cost.     

Removal of impurities from liquid solutions by vacuum desorption with solvent evaporation

Mass transfer with solvent evaporation in the vapor-liquid two-phase film evaporators used for the removal of undesirable impurities from liquid solutions at low pressure is studied. The average concentrations of solution components in the falling liquid film are determined. The most efficient operating conditions for impurity removal, in which the resistance to mass transfer is concentrated in the liquid phase, are found. Original Russian Text ? V.N. Babak, T.B. Babak, L.P. Kholpanov, 2008, published in Teoreticheskie Osnovy Khimicheskoi Tekhnologii, 2008, Vol. 42, No. 6, pp. 654–670.     

Recent advances in isotropic conductive adhesives for electronics packaging applications

Isotropic conductive adhesives (ICAs) have recently received a lot of focus and attention from the researchers in electronics industry as a potential substitute to lead-bearing solders. Numerous studies have shown that ICAs possess many advantages over conventional soldering such as environmental friendliness, finer pitch printing, lower temperature processing and more flexible and simpler processing. However, complete replacement of soldering by ICAs is yet not possible owing to several limitations of ICAs which are mainly related to reliability aspects like limited impact resistance, unstable contact resistance, low adhesion and conductivity etc. Continued efforts for last 15 years have resulted in development of ICAs with improved properties. This review article is aimed at providing a better understanding of ICAs, their principles, performance and significant research and development work addressing the technological utility of ICAs.     

An array-compensated spherical reflector antenna for a very large number of scanned beams

There are many stringent demands imposed on the applications of spaceborne antenna systems. One of the most challenging demands is the generation of multiple beams with the ability to scan a very large number of beamwidths. Since the parabolic reflectors have limitations in this application, a 35-m spherical reflector antenna is proposed for a geostationary radar antenna at Ka-band (35.6 GHz) due to its inherent capability of scanning the beams to very large number of beamwidths. The utility of using planar array feeds for correcting spherical phase aberrations is investigated to overcome the performance degradation effects. Two different methodologies are developed for the array excitation coefficients determination based on phase conjugate matching and the results are compared. Using the compensating feed array, the radiation characteristics of the compensated spherical reflector are simulated for no scan and large scan cases and the results are compared with the uncompensated case to show performance improvement. In order to demonstrate the technological readiness of the concept a 1.5-m breadboard model is designed to be built for experimental measurements. Some important mechanical design tolerances and realistic array feed topologies are investigated. The antenna concept developed in this paper is advocated to be used in the next generation of geostationary satellite antenna systems for remote sensing radar applications.     

Weekly storage of coolness in heavy brick and adobe walls

Weekly storage of coolness in heavy walls (walls with large thermal inertia or large characteristic time constants or low Fourier numbers) was investigated numerically by considering one-dimensional heat conduction through the walls. The study consisted of first analyzing the heat flow through a single wall and considering various boundary conditions on the inside. The boundary conditions were: constant inside air tempeture throughout the day, variable inside air temperature on a 24-hour cycle, and variable inside air temperature on a 48-hour cycle. Next, the heat flow through walls was studied through a thermal network analysis of a simple building. In this case it was assumed that the ambient air temperature (following a periodic distribution) was increased suddenly and followed this new distribution for many days thereafter.It was concluded that walls with high thermal inertia or time constant can store coolness for several days. The larger the time constant of the wall (for example adobe as compared with brick) the longer it takes for the wall temperature to reach a steady periodic distribution after the change has occurred. However, because of low thermal conductivity of adobe, the retrieval of the stored coolness in these walls is slow, and the mean daily temperature of the room air in the adobe building does not change appreciably beyond seven days after the change. Increase of the wall thickness beyond 50 cm does not improve the thermal performance of the building significantly.     

On the modal incremental dynamic analysis

In this article a new technique for the dynamic response of structures is investigated. This applied procedure can predict the approximate seismic performance of the structures and it is fast, inexpensive and results are reasonably acceptable. In fact, this novel method logically combines two different techniques, ‘incremental dynamic analysis (IDA)’ and ‘modal pushover analysis (MPA)’, presented by other researchers. This method will take advantage of both methodical ideas such as equivalent single degree of freedom of multi‐degree structures and the implementation of different scaled level of an earthquake record to the provided equivalent SDF structure. Using this procedure, simple approximate curves that present a realistic linear and non‐linear seismic behaviour of the structure due to the applied scaled level of earthquakes can easily be extracted. In this investigation, several four‐, eight‐ and 12‐storey structures are specified as the example models and are dynamically analysed. Next, three different scaled earthquakes, El Centro, Northridge and San Fernando, are applied to each example problem. The results of the presented technique, modal incremental dynamic analysis (MIDA), are then compared with the IDA method. Comparison of the results reveals good accuracy in building seismic demands evaluation. Finally, it is also shown that the MIDA method is simple enough to be carried out on most personal computers and the authors believe this technique will serve design engineers working in real design conditions. Copyright © 2005 John Wiley & Sons, Ltd.     

Agent-oriented techniques for network supervision

This paper presents the results of the Réseau futé (smart net) project, the goal of which is to use distributed AI and multi-agent techniques for network management and supervision. More precisely, these techniques have been applied to the partial automation of the dynamic processing (what is known about a network is always incomplete and can change at any time) of alarms and of various event notifications received by network management platforms. The system that we propose is able for example to automatically handle some alarms or to filter events of no-interest for a given operator. To achieve this goal, an assistant, or interface agent according to the model proposed by Patti Maes [MK93], has been realized. The goal of the assistant is first to learn, by observation, the behavior of the network supervision operator and second to reproduce such a behavior when the conditions in which the behavior has been learned are detected again. The learned information are stored using chronicles [Gha94]. A chronicle is a data-structure allowing programmers to represent sequences of events while taking temporal knowledge into account. Our assistant has been implemented and tested within Magenta which is a program, written in Smalltalk, that simulates (in a simplified way) a network management platform. This program respects roughly the gdmo and cmis standards.