Maximal stability robustness for state equations

A measure for stability robustness of a linear time-invariant finite-dimensional system state equations is introduced. An upper bound for the measure is derived using the characteristic values of the system. It is shown that the set of optimal systems, namely, systems for which the stability robustness measure attains the bound, contains the normal set, which has been considered as the set of optimal robustness     

Interaction of guided light in rib polymer waveguides with dielectrophoretically controlled nanoparticles

This work demonstrates an optofluidic system, where dielectrophoretically controlled suspended nanoparticles are used to manipulate the properties of an optical waveguide. This optofluidic device is composed of a multimode polymeric rib waveguide and a microfluidic channel as its upper cladding. This channel integrates dielectrophoretic (DEP) microelectrodes and is infiltrated with suspended silica and tungsten trioxide nanoparticles. By applying electrical signals with various intensities and frequencies to the DEP microelectrodes, the nanoparticles can be concentrated close to the waveguide surface significantly altering the optical properties in this region. Depending on the particle refractive indices, concentrations, positions and dimensions, the light remains confined or is scattered into the surrounding media in the microfluidic channel.     

Computing the null space of finite element problems

We present a method for computing the null space of finite element models, including models with equality constraints. The method is purely algebraic; it requires access to the element matrices, but not to the geometry or material properties of the model.Theoretical considerations show that under certain conditions, both the amount of computation and the amount of memory required by our method scale linearly with model size; memory scales linearly but computation scales quadratically with the dimension of the null space. Our experiments confirm this: the method scales extremely well on 3-dimensional model problems. In general, large industrial models do not satisfy all the conditions that the theoretical results assume; however, experimentally the method performs well and outperforms an established method on industrial models, including models with many equality constraints.The accuracy of the computed null vectors is acceptable, but the method is usually less accurate than a more naive (and computationally much more expensive) method.     

Rapid fabrication of poly(ε‐caprolactone) nanofibers using needleless alternating current electrospinning

Poly(ε‐caprolactone) ( PCL) biopolymer nanofibers and micro‐fibers have been fabricated for the first time at the rates up to 14.0 g per hour using a needleless and collectorless alternating current electrospinning technique. By combining the ac‐voltage, “green” low toxicity glacial acetic acid (AA) as the solvent and sodium acetate (NaAc) as an additive, beadless PCL fibers with diameters tunable from 150 nm to 2000 nm, varying surface morphology and degree of self‐bundling are obtained. In this new approach, the addition of NaAc plays a crucial role in improving the spinnability of PCL solution and fiber morphology. NaAc reveals the concentration‐dependent effect on charge transfer and rheological properties of the PCL/AA precursor, which results in broader ranges of spinnable PCL concentrations and ac‐voltages suitable for rapid manufacturing of PCL‐based fibers. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43232.     

Multifactor,Sequentially Releasing Scaffolds for Tissue Engineering:Fabrication Using Solvent/Nonsolvent Sintering Technology

Biodegradable constructs, providing both mechanical support to growing tissues and timed release of biological agents, are highly desired in tissue engineering. This study aimed to develop a platform technology that responds to these challenges. Accordingly, we report herein on model systems in which microspheres of poly(suberic anhydride), containing all-trans retinoic acid (atRA), and poly(d,l -lactic acid-co-glycolic acid), containing bovine serum albumin (BSA), were co-sintered at room temperature, using a solvent/nonsolvent mixture. These scaffolds release about 60% of atRA and negligible amounts of BSA within the first five days, followed by slower and steady release of BSA. They have pores of 150–500 μm and a compressive modulus of 200 kPa. Myoblasts and fibroblasts were seeded on the loaded scaffolds and both showed enhanced proliferation rates. Based on sound thermodynamic principles of polymer science, this technology demonstrates an as yet unachieved degree of versatility. It allows for the tailoring of “intelligent” scaffolds that preserve the integrity of the incorporated agents and of advanced modalities to release various drugs in a scheduled manner.     

A selectively deposited poly-gate ITLDD process with self-alignedLDD/channel implantation

An inverse-T lightly doped drain (ITLDD) CMOS process which features improved hot-carrier effects and self-aligned source/drain and channel implantation profiles is presented. Compensation effects by the heavy channel doping on the light N^-/P^- profile are minimized in this ITLDD structure, because the implants are self-aligned to the polysilicon-gate edge. In addition, because selective polysilicon deposition rather than an incomplete poly-gate etchback is used to define the ITLDD structure, a simpler, more manufacturable process is obtained due to improved control of the thin poly-gate shelf thickness     

Pregnancy outcomes among women with and without diabetic microvascular disease (White's classes B to FR) versus non-diabetic controls

The objective of this paper is to evaluate the impact of contemporary management on the maternal and neonatal outcomes of pregnancies complicated by diabetes in women with microvascular disease versus women without microvascular disease. The study population consisted of two hundred and eighty-eight (288) pregnant women with pregestational diabetes and one hundred and fifty (150) healthy pregnant controls. Diabetic women were grouped according to the presence (n = 103) or absence of diabetic microvascular disease (n = 185). Data were collected regarding diabetes management, level of glycemic control, and the development of antenatal complications. Maternal and neonatal outcomes were compared among the three groups. Women in the diabetes groups were stratified according to mean blood glucose levels and glycosylated hemoglobin during each trimester. There was no significant difference found between the two diabetes groups in terms of preterm labor, polyhydramnios, pyelonephritis, and growth restriction. The only maternal complications that occurred with increased incidence among women with microvascular disease were acute hypertensive complications (51.6 vs. 32.9%; p<0.05). However, when the diabetes groups were compared to healthy controls, a significant difference was seen in all maternal and neonatal complications. Preterm delivery, polyhydramnios, and large-for-gestational-age (LGA) infants were associated with poor third-trimester metabolic control as compared with others in satisfactory metabolic controls: 30.8 vs. 11.4% for preterm delivery; 17.3 vs. 5.1% for polyhydramnios; 51.9 vs. 33.9% for LGA; p<0.05. Congenital malformations were associated with poor first-trimester glucose control (5.8 vs. 1.3% anomalies in well-controlled women). Furthermore, major congenital malformations were also significantly increased in the offspring of women with diabetic microvascular disease 6.8%, as compared to 1.69% in diabetic women without microvascular disease; p<0.01. The incidence of hypertensive complications did not differ between the two diabetic groups. Pregestational diabetic women with and without microvascular disease can be counseled to anticipate comparably favorable pregnancy outcomes, although maternal and neonatal complications may exceed that experienced by pregnant women without diabetes mellitus.     

Electrical resistivity of La0.7A0.3O3 (A = Ca, Sr and Ba) at low temperature

Abstracts are not published in this journal This revised version was published online in November 2006 with corrections to the Cover Date.     

Screening obstructive sleep apnoea syndrome by home videotape recording in children

Overnight polysomnography (PSG) has been used to diagnose and assess the severity of obstructive sleep apnoea syndrome (OSAS) in children. The aim of this study was to determine whether home video-recording of children during sleep may be used for screening OSAS. In 58 children suspected of having OSAS, PSG results were compared with the corresponding analyses of 30 min video-recordings of each child sleeping at home. The video-recordings were evaluated by: 1) overall investigator's clinical judgement; and 2) a scoring system based on noisy breathing, movements, walking episodes, apnoea, chest retractions and mouth breathing. PSG results were highly correlated with the video test results, with agreement in 49 out of 58 (84%). In 36 of the 58 children, the PSG was abnormal compared with 41 out of 58 abnormal video tests. The sensitivity of the overall investigator judgement of video test was 94% (34 out of 36) and the specificity 68% (15 out of 22). Video scores > 10 were highly predictive of OSAS, whilst scores < 5 were associated with normality. Using a stepwise logistic regression analysis, each of the scoring variables was tested against the PSG results and an equation was formulated for predicting PSG by the video test. The equation predicted PSG results in 49 out of 58 (84%) cases. Thirty minutes of home video-recordings during sleep is a reliable screening method for obstructive sleep apnoea syndrome in children. This technique may, thus, improve patient selection for polysomnography.     

Disposable polysilicon LDD spacer technology

An advanced 0.5-μm CMOS disposable lightly doped drain (LDD) spacer technology has been developed. This 0.5-μm CMOS technology features surface-channel LDD NMOS and PMOS devices, n⁺/p⁺ poly gates, 125-A-thick gate oxide, and Ti-salicided source/drain/gate regions. Using only two masking steps, the NMOS and PMOS LDD spacers are defined separately to provide deep arsenic n⁺ regions for lower salicided junction leakage, while simultaneously providing shallow phosphorus n^- and boron p^- regions for improved device short-channel effects. Additionally, the process allows independent adjustment of the LDD and salicide spacers to optimize the LDD design while avoiding salicide bridging of source/drain to gate regions. The results indicate extrapolated DC hot-carrier lifetimes in excess of 10 years for a 0.3-μm electrical channel-length NMOS device operated at a power-supply voltage of 3.3 V