Cytotoxicity versus antibacterial activity of some antiseptics in vitro

The relationship between endometriosis and infertility is observed frequently. Patients with both conditions require a conservative approach to their management. Since hormonal therapy is one of those approaches, we sought to compare the efficacy of Danazol and Gestrinone in 80 infertile patients (48 and 32, respectively). Therapy lasted 6 months in both treatment groups, and all patients studied had laboratory tests performed and were clinically evaluated and classified through laparoscopy before and after therapy. The improvement of symptoms and favorable follow-up were similar with both treatments. The reestablishment of menstrual patterns and fertility were also nearly alike in both groups. However, Gestrinone was associated with fewer secondary effects and is easier to administer than Danazol. We conclude that Gestrinone is a useful medication in the management of the infertile patient with endometriosis.     

Dielectric properties of the system Ca1−xYxTi1−xCoxO3(0.00 ⩽ x ⩽ 0.15)

The dielectric behaviour of the compositions withx0.15 in the system Ca_1–x Y _x Ti_1–x Co _x O₃ sintered and cooled in air has been studied. Space-charge polarization which arises due to the presence of chemical inhomogeneities at the micro-level contributes significantly to their dielectric constant. The composition with x=0.05 exhibits temperature and frequency-independent dielectric constant and very small dielectric loss.     

Limits of compensation in a failed antenna array

In large antenna arrays, the possibility of occurrence of faults in some of the radiating elements cannot be precluded at all times. In such situations, the radiation pattern of the array gets distorted, mostly with an increase in sidelobe level and decrease in gain. Although it is not possible to restore the pattern fully by rearranging the excitations of the functioning elements, compensation methods have been reported in the literature for restoring one performance parameter of the array and making a trade‐off on some other parameter. In this article, we have made a study on the tolerance level of this compensation process. One part of the study deals with the thinning in the failed array, that is, to find a limit on the minimum number of functioning elements of the array that can restore the digital beamforming of the failed array. The second part of study deals with finding the maximum number of element failures that can be compensated. The study was carried out by optimizing the amplitude excitations of the failed array. Instead of classical optimization techniques, particle swarm optimization was used for the compensation process. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:635–645, 2014.     

Bacteria foraging optimization in antenna engineering: An application to array fault finding

Finding fault elements in linear antenna arrays using bacteria foraging optimization (BFO) is presented. One of the better options of array diagnosis is to perform it by measuring the radiated field, because in this case, removal of the array from its working site is not required and thereby not interrupting its normal operation. This task of fault finding from far‐field data is designed as an optimization problem where the difference between the far‐field power pattern obtained for a given configuration of failed element(s) and the measured one is minimized w. r. t. the excitations of the array elements. This set of excitations on comparison with the excitations of the original array gives the idea of the fault position and their type, such as either complete fault or partial fault. BFO being relatively new to microwave community when compared with other soft‐computing techniques, its performance was observed w. r. t. time of computation and convergence of the iterative process. Possibility of finding the faults from random sample points and use of minimum number of sample points for array fault finding are the novelties of the present work. © 2012 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2013.     

Video Data Delivery using Slotted Patching

In the request-based scheme, a patching channel is initiated on arrival of a request in an interarrival time of two adjacent multicast channels. If two requests are received in a short duration in an interarrival time, two patching channels are needed to service them. Both these channels deliver almost the same data, thus, wasting the bandwidth. This problem may be addressed in two ways: using higher level patching technique, or forcing the first request to wait for the second one. Using higher level patching technique makes the system more complex and thus usually not preferred. In the second case, the bandwidth usage certainly reduces, but the length of the waiting time by the first request for the second request is the main issue. In this paper, this issue is addressed by dividing the video duration into uniform time slots such that there is at least one request in a time slot for initiating the patching channel. The proposed scheme is named as Video Data Delivery using Slotted Patching. In this scheme, the patching channels download much less video data than the request-based scheme and thus require less bandwidth. This scheme may not provide immediate services to all users unlike the request-based scheme, but the user's waiting can be made arbitrarily small without using much resources unlike the request-based scheme.     

An analytic algorithm for the space–time fractional advection–dispersion equation

Fractional advection–dispersion equation (FADE) is a generalization of the classical ADE in which the first order time derivative and first and second order space derivatives are replaced by Caputo derivatives of orders 0<α?1, 0<β?1 and 1<γ?2, respectively. We use Caputo definition to avoid (i) mass balance error, (ii) hyper-singular improper integral, (iii) non-zero derivative of constant, and (iv) fractional derivative involved in the initial condition which is often ill-defined. We present an analytic algorithm to solve FADE based on homotopy analysis method (HAM) which has the advantage of controlling the region and rate of convergence of the solution series via the auxiliary parameter ? over the variational iteration method (VIM) and homotopy perturbation method (HPM). We find that the proposed method converges to the numerical/exact solution of the ADE as the fractional orders α, β, γ tend to their integral values. Numerical examples are given to illustrate the proposed algorithm. Example 5 describes the intermediate process between advection and dispersion via Caputo fractional derivative.     

A novel bacterial foraging technique for edge detection

A new approach for edge detection using a combination of bacterial foraging algorithm (BFA) and probabilistic derivative technique derived from Ant Colony Systems, is presented in this paper. The foraging behavior of some species of bacteria like Escherichia coli can be hypothetically modeled as an optimization process. A group of bacteria search for nutrients in a way that maximizes the energy obtained per unit time spent during the foraging. The proposed approach aims at driving the bacteria through the edge pixels. The direction of movement of the bacteria is found using a direction probability matrix, computed using derivatives along the possible directions. Rules defining the derivatives are devised to ensure that the variation of intensity due to noise is discarded. Quantitative analysis of the feasibility of the proposed approach and its comparison with other standard edge detection operators in terms of kappa and entropy are given. The effect of initial values of parameters of BFA on the edge detection is discussed.     

Study of Non-lubricated Wear of the Al–Si Alloy Composite Reinforced with Different Ratios of Coarse and Fine Size Zircon Sand Particles at Different Ambient Temperatures

In the present work, a detailed study of ceramic reinforcement of different size ranges in the matrix of LM13 alloy on the friction and wear behavior has been carried out. For this purpose, LM13/Zr composite containing 10 wt% zircon sand particles of different size ranges using stir casting process has been developed. Zircon sand particles were incorporated in two ways: firstly as single size reinforcement and secondly dual size reinforcement. Durability of the composites was tested by finding the wear rate of the composite against the steel disk by pin-on-disk method. Addition of zircon sand particles in the LM13 alloy improves the hardness of the composite as well as wear resistance. Wear rate of the developed composites was tested under different test conditions by varying the applied load and ambient temperatures. Wear rate of the composite changes significantly at different ambient temperatures. SEM analysis of the worn surfaces was done to know the operative wear mechanism.     

Low Cost Porous Alumina with Tailored Microstructure and Thermal Conductivity Prepared using Rice Husk and Sucrose

This study demonstrates a cost‐effective way to fabricate porous ceramics with tailored porosity and pore microstructure using 5–40 wt% rice husk (RH) in <75 μm, 75–180 μm, 180–355 μm, 355–420 μm, and 420–600 μm size, as pore former. Sucrose, used as binder, also acted as a pore former. Porous alumina compacts with 20%–66% volume fraction porosity and 50–516 μm pore size (length) were successfully fabricated. Microstructure of samples reveal randomly oriented elongated coarse pores and fine pores (avg. size 4 μm), created during burnout of RH and sucrose, respectively. Samples with isolated and/or interconnected pores were fabricated using this process. Thermal conductivity of the samples prepared was measured using Transient Plane Source (TPS) technique. Thermal conductivity ranges from 1.2 to 24 W/mK. Experimental results agree closely with predictions made based on Effective Medium Theory (EMT) for a two‐phase system.